최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국결정성장학회지 = Journal of the Korean crystal growth and crystal technology, v.29 no.5, 2019년, pp.229 - 237
강병국 (경기대학교 신소재공학과) , 강승구 (경기대학교 신소재공학과)
For maintaining high visibility of lane, the high refractive index glass beads with excellent retro-reflectivity are usually applied on the road marking paint. The retro-reflectivity standard of general road marking is different in each country; it is defined as
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
도로차선의 시인성은 무엇에 의해 좌우되는가? | 일반적으로 도로차선의 시인성은 빛을 입사된 방향으로 재반사시키는 ‘재귀반사성(retro-reflectivity)’에 의해 좌우된다[1]. 도로표시나 차선의 재귀반사성은 그 안에 도포되어 있는 글라스비드(glass bead)의 특성에 좌우된다. | |
글라스비드의 재귀반사도에 영향을 주는 인자로는 무엇이 있는가? | 1 및 2에 글라스비드 이미지 및 차선에 글라스비드를 도포하는 공사 모습을 각각 나타내었다[2,3]. 글라스비드의 재귀반사도에 영향을 주는 인자로는 표면성질, 조성, 굴절률, 투명도 등이 있다[4]. 이중 굴절률이 매우 중요한데, 건조상태에서 도로차선이 최대 재귀반사율을 나타내기 위해서 도포된 글라스비드의 굴절률이 1. | |
작게 절단된 융체 덩어리가 낙하하면서 표면장력에 의해 구형으로 되고, 이를 연화점 이하까지 냉각시킨 후 포집하는 방법의 장점은? | 6에 나타낸 것과 같이 탱크에 담긴 고온의 용융유리를 유출구(orifice)를 통해 천천히 흘려주면서 흘러나온 융체 줄기를 회전 칼(rotating knife wheel)로 절단하면, 작게 절단된 융체 덩어리가 낙하하면서 표면장력에 의해 구형으로 되고, 이를 연화점 이하까지 냉각시킨 후 포집하는 방법이다. 이 방법은 장치원리가 간단하며, 소규모생산에 적합하다. |
D.H. Park, Y.K. Kim, J.S. Choi and S.H. Ma, "Development of high durability road marking paint using high reflective glass beads", Report of Research by Korea Conformity Laboratories (2011) p. 21.
Glass bead, internet site at http://hanatechno.com/front/php/image_zoom.php?product_no506&main_cate_no111&display_group1.
Reflective glass beads. Traffic Supplies and Distribution, internet site at https://tsdist.com/product/pavementmarking-materials/reflective-glass-beads/reflective-glassbeads.
J.-I. Kim, "The preparation of glass beads", J. Korean Chem. Soc. 17 (1973) 198.
S.K. Lee, "Optimal mixtures of roadway pavement marking beads under various weather conditions", Korean Soc. Road Eng. 14 (2012) 131.
3M innovative properties company, "Transparent microspheres", United states patent 6245700 B1 (2001).
H.T. Zwahlen and T. Schnell, "Visibility of new centerline and edge line pavement markings", Tranportation Research Records, J. Transportation Research Board 1605 (1997) 491.
S.K. Lee, "Optimal mixtures of roadway pavement marking beads under various weather conditions", Ajou University graduate school Master's Thesis (2012) 31.
M.M. Matthew and L. Beverly, "Autonomous vehicles for personal transport: a technology assessment", working paper series (2011) 13.
D.H Lee, "Fully autonomous Hyundai car, Drive in Moscow", joongangnews (2019.07.12.) p. 4.
Korean National Police Agency, "Traffic Road Marking Installation.Management Manual" (2005).
Korean National Police Agency, "Traffic Road Marking Installation.Management Manual" (2012).
ASTM E1710, "Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer" (2018).
ASTM E2176, "Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain)" (2008).
ASTM E2177, "Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness" (2019).
CEN EN 1436, "Road Marking Materials" (1997).
Road Traffic Authority, "Research on securing road marking reflection performance" (2017).
D.H Joo, H.W. Lee and C.S. Hyeun, "A study on road marking reflective performance standards, road traffic authority", Report of Research (2012) 2012-0118-121.
ASTM E 808, "Standard Practice for Describing Retroreflection" (2016).
Y.J. Jo, "Development of glass beads manufacturing equipment", Report of Research by KITECH (1990).
H.Y. Ryu and S.J. Jo, "High refractive index glass beads and manufacturing method with excellent retroreflectivity", Korean Patent (2013) 10-1424912.
R.A. Serway and J.S. Faughn, "College Physics" (Brooks Cole, Boston, 2012) p. 598.
G.W. Morey, "The properties of glass", 2nd ed. (Reihold, New York, 1954) p. 591.
C.G. Lee, H.S. Lee and H.U. Oh, "High performance glass beads for traffic marking in wet water", J. Korean Soc. Road Eng. 14 (2012) 9.
B.S. Dunn and M. Yamane, "Sol - Gel Optics IV", Proceeding of SPIE Inter. Soc. Opt. Eng. 36 (1997).
Asahi glass, "Manufacturing method of high refractive index micro spherical glass", Japan patent (1998) 9-150888.
S.W. Kim and M.C. Jeon, "Manufacturing method of high refractive glass beads by coating", Korea patent (2000) 2002-0017667.
S.W. Kim and S.C. Hwang, "Manufacturing method of high refractive index glass beads by ion exchange", Korea patent (2000) 10-0463586.
KS L 2521, "Standard for glass beads for road marking paints" (2015).
KS M 6080, "Road marking materials" (2014).
C.G. Lee, "A Study of Quality control for 4-5 Type Road marking material", Report of Research (2016) p.72.
BS EN 1423, "Road marking materials. Drop on materials. Glass beads, antiskid aggregates and mixtures of the two" (2018).
M.H. Han, G.D. Choi, H.S. Seo and B.K. Mheen, "Analysis of eye-safe LIDAR signal under various mesurement environments and reflection conditions" Korean J. Opt. Photon. 29 (2018) 204.
Hyundai Motor Group, internet site at https://news.hmgjournal.com/Tech/night-highway-autonomous (2018).
G.H Kim, "A Preliminary Study to Make the Road Sector Ready for the Commercialization of Automated Vehicles: Focusing on Road Design and Planning" Report of KRIHS (Korea Research Institute for Human Settlements) (2018) p. 27.
H.S. Kim and Y.M. Kim, "The elements to affect lane marking recognition in automated driving", J. Korea Inst. Intell. Transp. Syst. (2018) 109.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.