최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.18 no.8, 2019년, pp.18 - 23
한문식 (계명대학교 기계자동차공학과) , 조재웅 (공주대학교 기계자동차공학부)
In this study, structural and fatigue analyses of the motor gears that control the height of car seat were carried out at angles of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Yoo, B. S., Koo, S. W. and Joh, J. S., “A Study on Suppression of Vibration Caused by Quick-stop Operation of Hydraulic Excavator Boom,” Journal of the Korean Society for Precision Engineering, Vol. 27, No. 12, pp. 33-40, 2010.
Cho, J. U. and Han, M. S., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015.
Lee, Y. S., Ok, J. K., Kim, H. J. and Yoo, W. S., “Analytical Investigation on the Track Separation Mechanism for Tracked Excavator,” Transactions of the Korean Society of Automotive Engineers, Vol. 14, No. 6, pp. 66-72, 2006.
Kang, H. J., Kim, B. H., Kim, H. J. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016.
Cho, J. U., Min, B. S. and Han, M. S., “Basic Study on Impact Analysis of Automobile,” J ournal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70, 2009.
Lee, J. I., A Study on the Design of Blimp Type Rotor Craft Blade according to Pitch Angle, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 606-611, 2018.
Wang, Z. H., Byun, S. J. and Kwon, Y. C., "Fatigue and Vibration Analysis of Table according to Applied Loads, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 568-573, 2018.
Wang, Z. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018.
Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., "A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight, Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018.
Lee, J. I., The Suggestion of Finite Element Modeling Method for Structural Design of Automotive Body, Journal of the Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 311-320, 2019.
Cho, J. U. and Han, M. S., “Structural Safety Analysis of Car Body,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 3, pp. 12-16, 2008.
Cho, J. U. and Han, M. S., “Durability Study on Structural Strength due to the Shape of Excavator Wheel,” Transactions of the Korean Society of Automotive Engineers, Vol. 21, No. 6, pp. 166-174, 2013.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.