참고문헌 (17)

1. J. W. Jeong, J. S. Won, W. G. Jo, H. H. Cho, E. H. Kim, and S. G. Lee, "Curing Behavior and Thermal Properties of DGEBA/phenol Novolac Epoxy Resin", Text. Sci. Eng., 2018, 55, 41-47. 

2. M. H. Jeon, H. R. Lee, J. S. Won, J. S. Kim, J. Y. Yoon, and S. G. Lee, "Effects of Molding Process Conditions on the Properties and Hole Machining Characteristics of Carbon Fiber Composites", Text. Sci. Eng., 2019, 56, 248-255. 

3. D. H. Choi, J. Choi, and K.-Y. Kim, "Electrical and Mechanical Properties of Carbon Fiber Nonwoven Reinforced Epoxy Composites with Carbon Nanotubes", Text. Sci. Eng., 2019, 56, 208-214. 

4. M. Lee, W. Kwon, and E. Jeong, "Effect of Stereoisomeric Structures of Curing Agents on Curing Behaviors, Thermal and Mechanical Properties of Epoxy Resins", Text. Color. Finish., 2018, 30, 180-189. 

5. J. S. Bae, J. Bae, H. Woo, B. Lee, and E. Jeong, "Novel Thermoplastic Toughening Agents in Epoxy Matrix for Vacuum Infusion Process Manufactured Composites", Carbon Lett., 2018, 25, 43-49. 

6. W. Kwon, M. Lee, M. Han, and E. Jeong, "Effect of Polytriazolesulfone Addition on Fracture Toughness of DGEBA Epoxy Resin", Text. Color. Finish., 2019, 31, 118-126. 

7. H. R. Azimi and R. Pearson, "A Mechanistic Understanding of Fatigue Crack Propagation Behavior of Rubber-Modified Epoxy Polymers", J. Mater. Sci., 1996, 31, 3777-3785. 

   상세보기

8. P. Rosso, L. Ye, K. Friedrich, and S. Sprenger, "A Toughened Epoxy Resin by Silica Nanoparticle Reinforcement", J. Appl. Polym. Sci., 2006, 100, 1849-1857. 

   상세보기

9. T. H. Hsieh, A. J. Kinloch, K. Masania, A. C. Taylor, and S. Sprenger, "The Mechanisms and Mechanics of the Toughening of Epoxy Polymers Modified with Silica Nanoparticles", Polymer, 2010, 51, 6284-6293. 

   상세보기

10. J. S. Won, J. H. Park, J. W. Jeong, and S. G. Lee, "Preparation and Characterization of Epoxy Resin Blended with Polyphenylene Sulfide", Text. Sci. Eng., 2018, 55, 130-135. 

11. J. B. Cho, J. W. Hwang, K. Cho, J. H. An, and C. E. Park, "Effects of Morphology on Toughening of Tetrafunctional Epoxy Resins with Poly Ether Imide, Polymer, 1993, 34, 4832-4840. 

    상세보기

12. R. D. Brooker, A. J. Kinloch, and A. C. Taylor, "The Morphology and Fracture Properties of Thermoplastic-Toughened Epoxy Polymers", J. Adhesion, 2010, 86, 726-734. 

    상세보기

13. K. Mimura, H. Ito, and H. Fujioka, "Improvement of Thermal and Mechanical Properties by Control of Morphologies in PES-modified Epoxy Resins", Polymer, 2000, 41, 4451-4460. 

    상세보기

14. M. Lee, W. Kwon, D. Kwon, E. Lee, and E. Jeong, "Fracture Toughness of the Novel in-situ Polytriazolesulfone Modified Epoxy Resin for Carbon Fiber/Epoxy Composites", J. Ind. Eng. Chem., 2019, 77, 461-469. 

    상세보기

15. W. B. Ying, H. S. Yang, D. S. Moon, M. W. Lee, N. Y. Ko, N. H. Kwak, B. Lee, J. Zhu, and R. Zhang, "Epoxy Resins Toughened with in situ Azide-Alkyne Polymerized Polysulfone", J. Appl. Polym. Sci., 2018, 135, 45790. 

    상세보기

16. J. S. Lee, N. Y. Ko, N. H. Kwak, W. B. Ying, and B. Lee, "Toughening of Semi-IPN Structured Epoxy Using a New PEEK-type Polymer via in situ Azide-Alkyne Click Polymerization", J. Appl. Polym. Sci., 2019, 136, 48178. 

    상세보기

17. D. Kwon, M. Lee, K. Kwon, E. Lee, and E. Jeong, "Influence of Stereoisomersism of Epoxy Hardeners on Fracture Toughness of Carbon Fiber/Epoxy Composites", Carbon Lett., 2019, 29, 449-453. 

    상세보기

저자의 다른 논문 :

배진석 (45)