최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기터널과 지하공간: 한국암반공학회지 = Tunnel and underground space, v.30 no.4, 2020년, pp.394 - 403
강훈 (한국표준과학연구원) , 김대지 (한국생산기술연구원) , 송창헌 (한국생산기술연구원) , 오주영 (한국생산기술연구원) , 조정우 (한국생산기술연구원)
This technical note describes the calculation method of continuous constant linear velocity Archimedean spiral paths which are applied to the pin-on-disk abrasion test. Approximate constant linear velocity Archimedean spirals have unstable velocities in the very near region of the rotational origin....
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
암반절삭 공구의 마모성능을 평가하는 가장 좋은 방법은 무엇인가? | 암반절삭 공구(rock cutting tool)의 마모성능을 평가하는 가장 좋은 방법은 현장 시험을 통하여 직접 측정하여 기록하는 것이다(Farrokh and Kim, 2018). 하지만 현장 측정의 어려움으로 인해 주로 실내시험(Cerchar 마모시험, AVS시험 등)을 통한 간접 측정 방법들이 사용되고 있다(Alber et al. | |
마모성능을 평가하는 간접 측정 방법들로는 어떤 것이 있는가? | 암반절삭 공구(rock cutting tool)의 마모성능을 평가하는 가장 좋은 방법은 현장 시험을 통하여 직접 측정하여 기록하는 것이다(Farrokh and Kim, 2018). 하지만 현장 측정의 어려움으로 인해 주로 실내시험(Cerchar 마모시험, AVS시험 등)을 통한 간접 측정 방법들이 사용되고 있다(Alber et al., 2013, ASTM, 2010, Nilsen, 2006). | |
등속도 나선 계산방법과 개발된 프로그램은 등속도 나선을 적용하는 다른 응용분야에 활용될 수 있는데, 그 외에 어느 분야에서 사용할 수 있는가? | 더불어, 연구자가 시편의 형상과 마모시험 조건의 변화에 따라 등속도 나선 경로를 편리하게 계산하는 데 도움을 주고자 나선경로 계산 프로그램을 개발하였다. 등속도 나선 계산방법과 개발된 프로그램은 암반절삭 공구의 마모시험을 사전에 검증하는데 사용할 수 있으며, 시험기의 시편 회전속도(RPM)와 암반절삭 공구의 반경 방향 이동 속도 제어를 위한 기초 데이터를 획득하는 데에도 사용 가능하다. 또한, 암반절삭 공구의 마모시험 이외에도 등속도 나선을 적용하는 다른 응용 분야에도 활용될 수 있다. |
Farrokh, E., D.Y. Kim, 2018, A discussion on hard rock TBM cutter wear and cutterhead intervention interval length evaluation, Tunnelling and Underground Space Technology, 81, 336-357.
Alber, M., O. Yarali, F. Dahl, A. Bruland, H. Kaling, T.N. Michalakopoulos, M. Cardu, P. Hagan, H. Aydin, A. Ozarslan, 2013. ISRM suggested method for determining the abrasivity of rock by the CERCHAR abrasivity test. In The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007-2014. 101-106.
ASTM Standard G132, 2010, Standard test method for laboratory determination of abrasiveness of rock using the Cerchar method.
ASTM Standard G-99, 2016, Standard Test method for Wear Tesing with a Pin-on-Disk Apparatus.
Nilsen, B., F. Dahl, J. Holzhauser, P. Raleigh, 2006, Abrasivity testing for rock and soils, Tunnels and Tunnelling International, 38(4), 47-49.
Kang, H., D. Kim, S.M. Lee, C. Song, J.Y. Oh, J.W. Cho, 2020, Approximate solution for constant velocity of Archimedean spiral for abrasion testing of rock cutting tools, Tunnel & Underground Space, 30(3), 181-192.
Mahmood, I.A. and S.R. Moheimani, 2010, Spiral-scan atomic force microscopy: A constant linear velocity approach. In 10th IEEE International Conference on Nanotechnology, 115-120.
Ziegler, D., T.R. Meyer, A. Amrein, A.L. Bertozzi, P.D. Ashby, 2016, Ideal scan path for high-speed atomic force microscopy. IEEE/ASME Transactions on Mechatronics, 22(1), 381-391.
Sang, X., A.R. Lupini, R.R. Unocic, M. Chi, A.Y. Borisevich, S.V. Kalinin, E. Endeve, R.K. Archibald, S. Jesse, 2017, Dynamic scan control in STEM: Spiral scans. Advanced Structural and Chemical Imaging, 2(1), 1-8.
Maple 2019, Maplesoft, https://www.maplesoft.com
※ AI-Helper는 부적절한 답변을 할 수 있습니다.