최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of nuclear fuel cycle and waste technology = 방사성폐기물학회지, v.18 no.2, 2020년, pp.327 - 336
The high-flux advanced neutron application reactor (HANARO) is a research reactor with thermal power of 30 MW applied in various research and development using neutrons generated from uranium fission chain reaction. A degasifier tank is installed in the ancillary facility of HANARO. This facility ge...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
HANARO란 무엇인가? | HANARO (High-flux Advanced Neutron Application Reactor)는 우라늄의 핵분열 연쇄반응에서 생성된 중성자를 이용하여 다양한 연구개발을 수행하는 열출력 30 MW 규모의 연구용 원자로이다. 탈기탱크는 HANARO의 부속시설에 설치되어 있다. | |
응축수의 생성 원인은 무엇인가? | 응축수가 발생하여 기체시료채취판넬의 분석기 내부로 유입된다면, 분석기의 측정 챔버 내부에 부식이 발생하여 고장을 야기한다. 응축수의 생성 원인은 탈기탱크에 존재하는 기체가 분석기로 유입되는 과정에서 탈기탱크와 분석기사이 온도 차이다. 응축수 생성을 억제하고 계통 내부에 생성된 응축수를 효율적으로 제거하기 위해 탈기탱크와 기체시료채취판넬 사이에 히팅시스템이 설치되었다. | |
HANARO에 설치되어 있는 탈기탱크가 필요한 이유는 무엇인가? | 탈기탱크는 내부환경요인으로 인해 기체오염물질을 발생시킨다. 탈기탱크는 기체오염물질을 허용 가능한 수준 이하로 유지하기위해 필요하며 기체시료채취판넬의 분석기에 의해 모니터링 된다. 응축수가 발생하여 기체시료채취판넬의 분석기 내부로 유입된다면, 분석기의 측정 챔버 내부에 부식이 발생하여 고장을 야기한다. |
Korea Atomic Energy Research Institute, "HANARO SAR", KAERI Technical Report, KAERI/TR-710/1996 (2020).
Korea Atomic Energy Research Institute, "HANARO SAR Chapter 11.7 FTL", KAERI Technical Report, KAERI/TR-3898/2009 (2009).
Korea Atomic Energy Research Institute, "FTL: The High Temperature Function Test Procedures before Loading the Nuclear Fuel (Comprehensive Test Procedures of Letdown, Makeup and Purification System) Rev. 1", KAERI Report, HAN-FL-S-062-DO-K104 (2008).
S.H. Cho, M.S. Kim, H.Y. Choi, and W.H. In, "Research on How to Remove Efficiently the condensate water of Sampling System", Proc. of the Korean Nuclear Society 2015 Autumn Meeting, October 29-30, P08F01, Gyeongju (2015).
Korea Atomic Energy Research Institute, "FTL: The Room Temperature Function Test Procedures (Sampling System Test Procedures)", KAERI Report, HANFL- S-062-DO-K008 (2007).
G. Zschaeck, T. Frank, and A.D. Burns, "CFD modelling and validation of wall condensation in the presence of non-condensable gases", Nucl. Eng. Des., 279, 137-146 (2014).
M. Lejon, "Wall Condensation Modelling in Convective Flow", Kungliga Tekniska Hogskolan School of Industrial Engineering and Management, Master of Science Thesis EGI-2013-092MSC EKV970, Stockholm (2013).
ANSYS CFX-Solver Theory Guide, R17, 72-75, 171-176, 183-191, ANSYS, Inc., Canonsburg, PA., Jan. 2016.
CFD Online, Mar. 28, 2014. "Dimensionless wall distance (y plus)", Accessed Jul. 27 2020. Available from: https://www.cfd-online.com/Wiki/Dimensionless_wall_ distance_(y_plus).
Korea Atomic Energy Research Institute, "LMP Ion Exchanger etc. equipment capacity statement - purification filter, resin filter, mixed demineralizer, degasifier tank, chemical additional tank Rev. 3", KAERI Report, HAN-FL-E-240-DC-H003 (2004).
S.Z. Kuhn, V.E. Schrock, and P.F. Peterson, "An investigation of condensation from steam-gas mixtures flowing downward inside a vertical tube", Nucl. Eng. Des., 177(1-3), 53-69 (1997).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.