최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of technologic dentistry : JTD, v.42 no.3, 2020년, pp.202 - 207
김동연 (폴드 치과기공소) , 이광영 (원광보건대학교 치기공과) , 김재홍 (부산가톨릭대학교 보건과학대학 치기공학과) , 양천승 (동아보건대학교 치기공과)
Purpose: This study is a comparative analysis of the strain according to deposition in a constant temperature water bath after manufacturing ultraviolet (UV)-cured artificial teeth. Methods: As a control group, 10 ready-made artificial teeth were selected as the first molar on the right side of the ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
치과용 삼차원(three-dimensional, 3D) 프린터는 어떤 제작 방식을 사용하는가? | 치과용 삼차원(three-dimensional, 3D) 프린터는 전용의 재료를 미세한 레이어 두께로 적층하여 제작 한다[1]. 치과 분야에서 주로 사용하는 전용의 재료들은 광경화 레진, 왁스, 금속 등을 쌓아 수복물을 제작한다[2]. | |
금속 3D 프린팅 장비의 단점은 무엇인가? | 금속 3D 프린팅 장비는 분말 상태의 금속 소재에 고출력 레이저를 조사하여 금속소재를 용융 접착시켜 쌓는 방식이다. 그러나 다른 프린팅 방식에 비해 유지관리 비용이 많이 소요되기 때문에 대중적으로 사용하기에는 한계가 있다. 반면 광(ultraviolet, UV)경화 3D 프린팅은 UV 액상에 UV를 조사하여 쌓는 방식이다. | |
UV 경화는 무엇인가? | UV 경화는 UV 개시제(photoinitiator)에 UV를 조사함으로써 개시 반응이 시작되고 모노머(monomer), 올리고머(oligomer), 각종 첨가제가 연속 반응을 일으켜 경화(photopolymerization)되는 과정이다[4,5]. UV 경화 레진의 적용 범위는 인쇄용 잉크, 의료용, 홀로그램 저장 매체, 접착제 등 폭넓게 사용하고 있는 추세이며 치과 분야에서도 보철물 적용사례가 증가하고 있다[4,5]. |
Kim DY, Jeong ID, Kim JH, Kim HY, Kim WC. Reproducibility of different coping arrangements fabricated by dental micro-stereolithography: evaluation of marginal and internal gaps in metal copings. J Dent Sci. 2018;13:220-225.
Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res. 2018;62:56-64.
Kang W, Lee HK. A study of three-dimensional evaluation of the accuracy of resin provisional restorations fabricated with the DLP printer. J Kor Aca Den Tec. 2020;42:35-41.
Do HS, Kim DJ, Kim HJ. Application of UV-curable materials. J Adhes Interface. 2003;4:41-51.
Kim DY. Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath. J Kor Aca Den Tec. 2020;42:113-120.
Choi YS, Lee JS, Cho IH. Comparative study on wear resistance and hardness of several artificial resin teeth. J Dent Rehabil Appl Sci. 2008;24:129-146.
Kim WC, Kim JH, Lee WS, Kim KB, Kim JH, Jeon JH, et al. Dental materials. 4th ed. Seoul: Daihak Publishing Company, 2015.
Wimmer T, Gallus K, Eichberger M, Stawarczyk B. Complete denture fabrication supported by CAD/CAM. J Prosthet Dent. 2016;115:541-546.
Chen SG, Yang J, Jia YG, Lu B, Ren L. TiO2 and PEEK reinforced 3D printing PMMA composite resin for dental denture base applications. Nanomaterials (Basel). 2019;9:1049.
ASTM International. ASTM C326-09, standard test method for drying and firing shrinkages of ceramic whiteware clays. West Conshohocken (PA): ASTM International, 2009.
Park JS, Park MG. Effect of aging treatment on the flexural properties of polymer provisional restoration materials. Korean J Dent Mater. 2013;40:215-221.
Kim DY, Park JY, Bae SY, Kang HW, Kim JH, Kim WC. Evaluation of fitness according to application of glass fiber reinforcement for lower jaw complete denture. J Kor Aca Den Tec. 2018;40:201-207.
Park DR, Bae JM. Mechanical properties and biocompatibility of experimental 3D printing denture base resin. Korean J Dent Mater. 2019;46:253-262.
Kim DY, Jung ID, Park JY, Kang SY, Kim JH, Kim WC. Accuracy evaluation of resin complete denture made with glass fiber mesh reinforcement before and after curing. J Kor Aca Den Tec. 2017;39:25-33.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.