최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.19 no.9, 2020년, pp.9 - 14
최계광 (공주대학교 금형설계공학과) , 조재웅 (공주대학교 기계자동차공학부)
In this study, CFX analyses were performed with flow models to minimize the flow resistance due to the windscreen on the front of a car body. The results indicated that the greater the slant angle of the windshield, the greater the maximum pressure area. The lower the slant angle of the windscreen, ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Jo, S. H, Park, J. I. and Nam, K. W., “Numerical Simulation in the IC Engine Lubricating Gerotor Oil Pump,” Transactions of the Korean Society of Mechanical Engineers B, Vol. 30, No. 10, pp. 1019-1025, 2006.
Cho, H. J., “Potential Flow Analysis around a Inlet Duct of a Water-jet Propulsion System,” Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 1, pp. 1149-1154, 2014.
Kim, H. K. and Cho, H. M., “A Study on Comparative Analysis of Internal ECV Through Flow Analysis,” Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 1, pp. 1161-1166, 2014.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.