[논문]전문건설업 안전문화 평가에 관한 연구

신상연; 백신원; 정성룡

doi:10.14346/jkosos.2021.36.2.18

전문건설업 안전문화 평가에 관한 연구
A Study on the Evaluation of Safety Culture in Specialty Contractor 원문보기

한국안전학회지 = Journal of the Korean Society of Safety, v.36 no.2, 2021년, pp.18 - 25

신상연 (한경대학교 토목안전환경공학과) , 백신원 (한경대학교 사회안전시스템공학부) , 정성룡 (한경대학교 토목안전환경공학과)

Abstract ▼ AI-Helper

Specialty contractor facilities, which involve a combination of welding and commissioning, face a high risk of serious accidents such as fire, explosion, and suffocation associated with welding work, nitrogen, and argon use. In such facilities, the organizational safety culture has considerable impact on the frequency of accidents. In this study, a safety culture evaluation was conducted on specialty contractors. NOSACQ-50, a standardized survey method on safety culture, was selected as an assessment tool to evaluate the safety culture in specialized construction companies that could not afford to invest heavily in safety. The self-administered questionnaire survey was conducted with 201 workers of four construction companies and the results were analyzed. It was found that in companies with low safety culture, the occurrence of irrationality was 66.0%, while in companies with high safety culture, the occurrence of irrationality was 42.6%. Thus, the difference in the occurrence of irrationality by safety culture was statistically significant. The difference in safety culture level according to the experience of occurrence of irrationality was also significant. It was also found that the higher the belief in safety management authorization, safety responsibilities of managers, worker safety priorities, and safety system effects, the lower the probability of irrationality.

주제어

표/그림 (18)

표 Table 1. Survey question outline
표 Table 2. Safety culture evaluation tool
표 Table 3. Composition of the safety culture survey
표 Table 4. General status of research
표 Table 5. Cronbach analysis results for measuring tools(N=201)
표 Table 6. Results of survey trend and normality analysis
표 Table 7. Pearson correlation analysis(N=201)
그림 Fig. 1. Evaluation results of 7 factors for safety culture level evaluation.
그림 Fig. 2. Results of assessment of safety management responsibilities and capabilities.
그림 Fig. 3. Results of the safety management authorization assessment.
그림 Fig. 4. Results of the fairness assessment of safety management.
그림 Fig. 5. Results of safety management responsibilities assessment.
그림 Fig. 6. Safety management priority assessment results.
그림 Fig. 7. Results of safety assessment of learning, communicationand trust.
그림 Fig. 8. Results of belief assessment on safety system effects.
표 Table 7. Irrationality according to the level of safety culture (N=201)
표 Table 8. Differences in safety culture levels due to unreasonable experiences(N=201)
표 Table 9. Irrationality by factors of safety culture questionnaire (N=201)

참고문헌 (8)

S. M. Park and K. J. Lee, "A Study on Development of Quantitative Indicators for Safety Culture Assessment", Journal of Korea Entertainment Industry Association, Vol. 9, No. 3, pp. 401-408, 2015.
G. G. Eo, W. M. Gal and S. Y. Lee, "A Study on the Development of Safety and Health Culture", Institute for Industrial Safety and Health, pp. 87-99, 2010.
S. K. Lee, C. B. Park and Y. S. Yoon, "Research about Researcher's Safety Ethnic Level and Improvement Extent of Safety Culture, Based on Organizational Safety Efforts", J. Korean Soc. Saf., Vol. 30, No. 3, pp. 123-134, 2015.

원문보기 상세보기
J. B. Baek, S. J. Bae, S. B. Kang, S. B. Kim and J. I. Kim, "A Study on the Perception and Attitude of Safety and Health in the Workplace by Self-Management of Risk Factors", Institute for Industrial Safety and Health, pp. 122-131, 2010.
S. U. Lee, G. S. Kim and H. J. Kwon, "A Study on the Health and Safety Recognition and Attitude of the Pilot Project of Risk Factors Management", Institute for Industrial Safety and Health, pp. 53-66, 2011.
W. S. Jung, W. B. Kim and J. Y. Park, "A Study on the Safety Culture and Efficient Safety Management System", Institute for Industrial Safety and Health, pp. 74-82, 2003.
S. K. Yoon, H. S. Yang and G. H. Moon, "A Case Study on the Safety Culture Evaluation and Improvement of Enterprise", Institute for Industrial Safety and Health, pp. 55-67, 2016.
I. G. Hong and J. B. Baek, "Towards an Effective Assessment of Safety Culyure", J. Korean Soc. Saf., Vol. 31, No. 1, pp. 118-125, 2016.

원문보기 상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증