다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.20 no.8, 2021년, pp.93 - 98
서동현 (울산대학교 첨단소재공학부) , 권예필 (울산대학교 첨단소재공학부) , 김영재 (한국기초과학지원연구원 연구장비운영부 기술지원팀) , 최환진 (한국기초과학지원연구원 연구장비운영부 기술지원팀) , 전은채 (울산대학교 첨단소재공학부)
AI-Helper
The complex effects of the machining parameters make it is difficult to control and predict surface roughness. The theoretical surface roughness observed during mechanical machining with a round tool is determined by the tool radius and pitch. However, it was revealed that other parameters, such as ...
Je, T. J., Choi, D. S., Jeon, E. C., Park, E. S., and Choi, H. J., "Trends of flat mold machining technology with micro pattern," Journal of Korean Society of Manufacturing Process Engineers, Vol. 11, No. 2, pp. 1-6, 2012.
Korkut, I., and Donertas, M. A., "The influence of feed rate and cutting speed on the cutting forces, surface roughness and tool-chip contact length during face milling," Materials & Design, Vol. 28, No. 1, pp. 308-312, 2007.
Zhang, J. Z., Chen, J. C., and Kirby, E. D., "Surface roughness optimization in an endmilling operation using the Taguchi design method," Journal of Materials Processing Technology, Vol. 184, No. 1-3, pp. 233-239, 2007.
Seo, N. S., Engineering of Machining, Dong Myeong Publishers, pp. 191-217, 2002.
Cheung, C. F., and Lee, W. B., "Characterisation of nanosurface generation in single-point diamond turning," International Journal of Machine Tools & Manufacture, Vol. 41, No. 6, pp. 851-875, 2001.
Asilturk, I., and Akkus, H., "Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method," Measurement, Vol. 44, No. 9, pp. 1697-1704. 2011.
Thomas, M., Beauchamp, Y., Youssef, A. Y., and Masounave, J., "Effect of tool vibrations on surface roughness during lathe dry turning process," Computers & Industrial Engineering, Vol. 31, No. 3-4, pp. 637-644. 1996.
Hua, Y., and Liu, Z., "Effects of cutting parameters and tool nose radius on surface roughness and work hardening during dry turning Inconel 718," International Journal of Advanced Manufacturing Technology, Vol. 96, No. 5, pp. 2421-2430, 2018.
Patel, V. D., and Gandhi, A. H., "Analysis and modeling of surface roughness based on cutting parameters and tool nose radius in turning of AISI D2 steel using CBN tool," Measurement, Vol. 138, pp. 34-38, 2019.
Nalbant, M., Gokkaya, H., and Sur, G., "Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning," Materials & Design, Vol. 28, No. 4, pp. 1379-1385, 2007.
Airao, J., Chaudhary, B., Bajpai, V., and Khanna, N., "An experimental study of surface roughness variation in end milling of super duplex 2507 stainless steel," Materials Today: Proceedings, Vol. 5, No. 2, pp. 3682-3689, 2018.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.