$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

유연한 전기변색 소자를 위한 세공충진 고분자 전해질 멤브레인의 개발
Development of Pore-filled Polymer Electrolyte Membranes for Flexible Electrochromic Devices 원문보기

멤브레인 = Membrane Journal, v.31 no.5, 2021년, pp.333 - 342  

박현정 (상명대학교 그린화학공학과) ,  이지현 (상명대학교 그린화학공학과) ,  강문성

초록
AI-Helper 아이콘AI-Helper

유연한 전기변색 소자(electrochromic device, ECD)는 스마트 윈도우 등 다양한 분야에서 응용이 기대되는 유망한 기술이다. 고분자 전해질은 유연한 ECD의 탈-변색 성능 및 물리적 안정성을 결정하는 중요한 구성요소이다. 본 연구에서는 효과적인 유연한 ECD 제조 및 내구성 향상을 위해 치수안정성이 우수한 세공충진 고분자 전해질 멤브레인(PFPEM)을 개발하였다. 저렴하며 물리적 및 화학적 안정성이 우수한 폴리에틸렌 재질의 다공성 지지체의 세공에 접착력이 우수한 polyvinyl acetate와 이온전도도를 향상시킬 수 있는 polyethylene glycol을 사용하여 제조한 고분자 전해질을 충진하였다. 제조된 PFPEM의 최적 리튬 염(LiTFSI) 함량은 약 27 wt%에서 결정되었으며 우수한 치수안정성와 접착 강도 그리고 종래의 고분자 전해질에 근접하는 이온전도 특성을 가지고 있음을 확인하였다. 다공성 지지체의 사용으로 가시광 투과율이 저하되었으나 변색 상태에서는 오히려 장점으로 작용할 것으로 전망되었다.

Abstract AI-Helper 아이콘AI-Helper

A flexible electrochromic device (ECD) is a promising technology that is expected to be applied in various fields such as smart windows. Polymer electrolyte is an important component that determines the bleaching-coloration performance and physical stability of flexible ECDs. In this study, a pore-f...

주제어

참고문헌 (33)

  1. C. G. Granqvist, "Electrochromic tungsten oxide films: review of progress 1993-1998", Sol. Energy Mater. Sol. Cells, 60, 201 (2000). 

  2. S. Macher, M. Rumpel, M. Schott, U. Posset, G. A. Giffin, and P. Lobmann, "Avoiding voltage-Induced degradation in PET-ITO-based flexible electrochromic devices", ACS Appl. Mater. Interfaces, 12, 36695 (2020). 

  3. D. W. Kim, S. Y. Kim, and J. H. Yun, "R&D trends for smart window materials", Information Display, 19, 29 (2018). 

  4. Y. Kim, M. Han, J. Kim, and E. Kim, "Electrochromic capacitive windows based on all conjugated polymers for a dual function smart window", Energy Environ. Sci., 11, 2124 (2018). 

  5. P. R. Somani and S. Radhakrishnan, "Electrochromic materials and devices: present and future", Mater. Chem. Phys., 77, 117 (2003). 

  6. E. Eren, M. F. Aydin, and A. U. Oksuz, "A practical approach for generation of WO 3 -based flexible electrochromic devices", J. Solid State Electrochem., 24, 1057 (2020). 

  7. R. Leones, R. C. Sabadini, F. C. Sentanin, J. M. S. S. Esperanca, A. Pawlicka, and M. M. Silva, "Polymer electrolytes for electrochromic devices through solvent casting and sol-gel routes", Sol. Energy Mater. Sol. Cells, 169, 98 (2017). 

  8. S. J. Yoo and Y. E. Sung, "Electrochromic materials and devices", News & Information for Chemical Engineers, 26, 519 (2008). 

  9. A. L. S. Eh, A. W. M. Tan, X. Cheng, S. Magdassi, and P. S. Lee, "Recent advances in flexible electrochromic devices: the prerequisites, challenges and prospects", Energy Technol., 6, 33 (2017). 

  10. S. Guan, W. Wang, J. Zheng, and C. Xu, "A method to achieve full incorporation of PMMA-based gel electrolyte in fiber-structured PVB for solid-state electrochromic device fabrication", Electrochim. Acta, 354, 136702 (2020). 

  11. J. S. Yu and S. H. Lee, "Adhesion and adhesion mechanism", J. Adhes. Interface, 1, 63 (2000). 

  12. K.-W. Cho and D.-H. Lee, "Adhesion theory and adhesion technology", Polym. Sci. Technol., 6, 545 (1995). 

  13. N. Myshkin and A. Kovalev, "Adhesion and surface forces in polymer tribology-A review", Sol. Energy Mater. Sol. Cells, 6, 143 (2018). 

  14. T. S. Babra, M. Wood, J. S. Godleman, S. Salimi, C. Warriner, N. Bazin, C. R. Siviour, I. W. Hamley, W. Hayes, and B. W. Greenland, "Fluoride-responsive debond on demand adhesives: Manipulating polymer crystallinity and hydrogen bonding to optimise adhesion strength at low bonding temperatures", Eur. Polym. J., 119, 260 (2019). 

  15. J. LeBono, L. Barton, and M. Birkett, "Low temperature tensile lap-shear testing of adhesively bonded polyethylene pipe", Int. J. Adhes. Adhes., 74, 57 (2017). 

  16. R. Brooke, E. Mitraka, S. Sardar, M. Sandberg, A. Sawatdee, M. Berggren, X. Crispin, and M. P. Jonsson, "Infrared electrochromic conducting polymer devices", J. Mater. Chem. C, 5, 5824 (2017). 

  17. S. J. Kwon, S.-H. Park, M. S. Park, J. S. Lee, and J.-H. Lee, "Highly permeable and mechanically durable forward osmosis membranes prepared using polyethylene lithium ion battery separators", J. Membr. Sci., 544, 213 (2017). 

  18. M. H. Park and J. H. Hong, "The trends of functional Aahesion and environmental countermeasure", Polym. Sci. Technol., 6, 595 (1995). 

  19. A. Kaboorani, B. Riedl, P. Blanchet, M. Fellin, O. Hosseinaei, and S. Wang, "Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive", Eur. Polym. J., 48, 1829 (2012). 

  20. G. Petkovic, M. Vukoje, J. Bota, and S. P. Preprotic, "Enhancement of polyvinyl acetate (PVAc) adhesion performance by SiO 2 and TiO 2 nanoparticles", Coatings, 9, 707 (2019). 

  21. E. Jasiukaityte-Grojzdek, M. Kunaver, D. Kukanja, and D. Moderc, "Renewable (waste) material based polyesters as plasticizers for adhesives", Int. J. Adhes. Adhes., 46, 56 (2013). 

  22. S. F. Dana, D.-V. Nguyen, J. S. Kochhar, X.-Y. Liu, and L. Kang, "UV-curable pressure sensitive adhesive films: effects of biocompatible plasticizers on mechanical and adhesion properties", Soft Matter, 9, 6270 (2013). 

  23. H. T. Ahmed, V. J. Jalal, D. A. Tahir, A. H. Mohamad, and O. G. Abdullah, "Effect of PEG as a plasticizer on the electrical and optical properties of polymer blend electrolyte MC-CH-LiBF 4 based films", Results Phys., 15, 102735 (2019). 

  24. I. C. Ezenwa and T. Yoshino, "Electrical resistivity of solid and liquid Pt: Insight into electrical resistivity of ε-Fe", Earth Planet. Sci. Lett., 544, 116380 (2020). 

  25. P.-W. Chen, C.-T. Chang, M. M. Ali, J.-Y. Wu, Y.-C. Li, M.-H. Chen, D.-J. Jan, and C.-T. Yuan, "Tantalum oxide film deposited by vacuum cathodic arc plasma with improved electrochromic performance", Sol. Energy Mater. Sol. Cells, 182, 188 (2018). 

  26. V. B. Isfahani, N. Memarian, H. R. Dizaji, A. Arab, and M. M. Silva, "The physical and electrochromic properties of Prussian Blue thin films electrodeposited on ITO electrodes", Electrochim. Acta, 304, 282 (2019). 

  27. G. T. Phan, D. V. Pham, R. A. Patil, C.-H. Tsai, C.-C. Lai, W.-C. Yeh, Y. Liou, and Y.-R. Ma, "Fast-switching electrochromic smart windows based on NiO-nanorods counter electrode", Sol. Energy Mater. Sol. Cells, 231, 111306 (2021). 

  28. Y. Yue, H. Li, K. Li, J. Wang, H. Wang, Q. Zhang, Y. Li, and P. Chen, "High-performance complementary electrochromic device based on WO 3 ·0.33H 2 O/PEDOT and prussian blue electrodes", J. Phys. Chem. Solids, 110, 284 (2017). 

  29. Acik, G., Cansoy, C. E., and Kamaci, M.,"Effect of flow rate on wetting and optical properties of electrospun poly(vinylacetate) micro-fibers", Colloid Polym. Sci., 297, 77 (2019). 

  30. Y. J. Kim, J. H. Kim, M.-S. Kang, M. J. Lee, J. Wpm, J. C. Lee, and Y. S. Kang, "Supramolecular electrolytes for use in highly efficient dye-sensitized solar cells", Adv. Mater., 16, 1753 (2004). 

  31. Chieng, B., Ibrahim, N., Yunus, W., and Hussein, M., "Poly(lactic acid)/poly(ethylene glycol) polymer nanocomposites: effects of graphene nanoplatelets", Polymers, 6, 93 (2013). 

  32. M. Marcos, D. Cabaleiro, M. Guimarey, M. Comunas, L. Fedele, J. Fernandez, and Lugo, L., "PEG 400-based phase change materials nano-enhanced with functionalized graphene nanoplatelets", Nanomaterials, 8, 16 (2017). 

  33. M.-S. Kang, J. H. Kim, J. Won, and Y. S. Kang, "Dye-sensitized solar cells based on crosslinked poly(ethylene glycol) electrolytes", J. Photochem. Photobiol. A, 183, 15 (2006). 

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로