최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.54 no.5, 2021년, pp.213 - 221
김문수 (인하대학교 화학공학과) , 임경민 (인하대학교 화학공학과) , 하재윤 (인하대학교 화학공학과) , 김용태 (인하대학교 화학공학과) , 최진섭 (인하대학교 화학공학과)
In order to improve the energy density and safety of Li-ion batteries, the development of a separator with high thermal stability and electrolyte wettability is an important desire. Thus, the ceramic separator to replace the polymer type is one of the most promising materials that can prevent short-...
S. S. Zhang, A review on the separators of liquid electrolyte Li-ion batteris, J. Power Sources, 164 (2007) 351-364.
X. Huang, Separator technologies for lithium-ion batteries, J. Solid State Electrochem., 15 (2011) 649-662.
J. Lee, C. -L. Lee, K. Park, I. -D. Kim, Synthesis of an Al 2 O 3 -coated polyimide nanofiber mat and its electrochemical characteristics as a separator for lithium ion batteries, J. Power Sources, 248 (2014) 1211-1217.
Y. Liang, S. Cheng, J. Zhao, C. Zhang, S. Sun, N. Zhou, Y. Qiu, X. Zhang, Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries, J. Power Sources, 240 (2013) 204-211.
N. S. Choi, Z. Chen, S. A. Freunberger, X. Ji, Y. K. Sun, K. Amine, G. Yushin, L. F. Nazar, J. Cho, P.G. Bruce, Challenges facing lithium batteries and electrical double-layer capacitors, Angew. Chem. Int. Ed., 51 (2012) 9994-10024.
T. -H. Cho, M. Tanaka, H. Onishi, Y. Kondo, T. Nakamura, H. Yamazaki, S. Tanase, T. Sakai, Battery performances and thermal stability of polyacrylonitrile nano-fiber-based nonwoven separators for Li-ion battery, J. Power Sources, 181 (2008) 155-160.
T. Dong, W. U. Arifeen, J. Choi, K. Yoo, T. J. Ko, Surface-Modified Electrospun Polyacrylonitrile Nano-membrane for a Lithium-Ion Battery Separator Based on Phase Separation Mechanism, Chem. Eng. J., (2020) 125646.
S. Wu, J. Ning, F. Jiang, J. Shi, F. Huang, Ceramic Nanoparticle-Decorated Melt-Electrospun PVDF Nanofiber Membrane with Enhanced Performance as a Lithium-Ion Battery Separator, ACS omega, 4 (2019) 16309-16317.
Y. Ko, H. Yoo, J. Kim, Curable polymeric binder-ceramic composite-coated superior heat-resistant polyethylene separator for lithium ion batteries, RSC Adv., 4 (2014) 19229-19233.
M. Sundararajan, M. Devarajan, M. Jaafar, Investigation of surface and mechanical properties of Anodic Aluminium Oxide (AAO) developed on Al substrate for an electronic package enclosure, Surf. Coat. Technol., 401 (2020) 126273.
원국광, 최태규, 양극산화 기술, 신광문화사 (2003).
H. Masuda, and K. Fukuda, Ordered Metal Nanohole Arrays Made by a Two-Step Replication of Honeycomb Structures of Anodic Alumina, Science, 268 (1995) 1466-1468.
A. Rath, P. Theato, Advanced AAO Templating of Nanostructured Stimuli-Responsive Polymers: Hype or Hope?, Adv. Funct. Mater., 30 (2020) 1902959.
M. Remesova, S. Tkachenko, D. Kvarda, I. Rocnakova, B. Gollas, M. Menelaou, L. Celko, J. Kaiser, Effects of anodizing conditions and the addition of Al 2 O 3 /PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy, Appl. Surf. Sci., 513 (2020) 145780.
J. Yi, H. Pan, J. Lin, J. Ding, Y. Feng, S. Thongmee, T. Liu, H. Gong, L. Wang, Ferromagnetism in ZnO Nanowires Derived from Electro-deposition on AAO Template and Subsequent Oxidation, Adv. Mater., 20 (2008) 1170-1174.
Q. Xu, G. Meng, F. Han, Porous AAO template-assisted rational synthesis of large-scale 1D hybrid and hierarchically branched nanoarchitectures, Progress in Materials Science, 95 (2018) 243-285.
H. Robatjazi, S.M. Bahauddin, L.H. Macfarlan, S. Fu, I. Thomann, Ultrathin AAO membrane as a generic template for sub-100 nm nanostructure fabrication, Chem. Mater., 28 (2016) 4546-4553.
H. Takahasi, M. Nagayma, H. Akahori, A. Kitahara, Electron-microscopy of porous anodic oxide films on aluminium by ultra-thin sectioning technique: part 1. The structrual change of the film during the current recovery period, Microscopy, 22 (1973) 149-157.
L. Zaraska, E. Kurowska, G.D. Sulka, M. Jaskula, Porous alumina membranes with branched nanopores as templates for fabrication of Y-shaped nanowire arrays, J. Solid State Electrochem., 16 (2012) 3611-3619.
M. Kim, J. Lee, M. Je, B. Heo, H. Yoo, H. Choi, J. Choi, K. Lee, Electric field-driven one-step formation of vertical p-n junction TiO 2 nanotubes exhibiting strong photocatalytic hydrogen production, J. Mater. Chem. A, 9 (2021), 2239-2247.
M. Kim, H. Yoo, J. Choi, Non-nickel-based sealing of anodic porous aluminum oxide in NaAlO 2 , Surf. Coat. Technol., 310 (2017), 106-112.
J. Gruberger, E. Gileadi, Plating on anodized aluminum-I. The mechanism of charge transfer across the barrier-layer oxide film on 1100 aluminum, Electrochim. Acta, 31 (1986) 1531-1540.
G. D. Sulka, W. J. Stepniowski, Structural features of self-organized nanopore arrays formed by anodization of aluminum in oxalic acid at relatively high temperatures, Electrochim. Acta, 54 (2009), 3683-3691.
W. Lee, S. -J. Park, Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures, Chem. Rev., 114 (2014), 7487-7556.
K. Schwirn, W. Lee, R. Hillebrand, M. Steinhart, K. Nielsch, U. Gosele, Self-Ordered Anodic Aluminum Oxide Formed by H 2 SO 4 Hard Anodization, ACS Nano, 2 (2008), 302-310.
L. Zaraska, G. D. Sulka, M. Jaskula, Anodic alumina membranes with defined pore diameters and thicknesses obtained by adjusting the anodizing duration and pore opening/widening time, J. Solid State Electrochem., 15 (2011), 2427-2436.
B. Marquardt, L. Eude, M. Gowtham, G. Cho, H. J. Jeong, M. Chatelet, C. S. Cojocaru, B. S. Kim, D. Pribat, Density control of electrodeposited Ni nanoparticles/nanowires inside porous anodic alumina templates by an exponential anodization voltage decrease, Nanotechnology, 19(40) (2008), 405607.
C. Shuoshuo, L. Zhiyuan, H. Xing, Y. Hui, L. Yi, Competitive growth of branched channels inside AAOmembranes, J. Mater. Chem., 20 (2010), 1794-1798.
H. Xing, L. Ziyuan, W. Kai, L. Yi, Fabrication of three dimensional interconnected porous carbons from branched anodic aluminum oxide template, Electrochem. Commun., 13(10) (2011), 1082-1085.
Y. Fan, E. Sharbrough, H. Liu, Quantification of the Internal Resistance Distribution of Microbial Fuel Cells, Environ. Sci. Technol., 42(21) (2008), 8101-8107.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.