$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

불균형 데이터를 갖는 냉동 컨테이너 고장 판별 및 원인 분석을 위한 기계학습 모형 개발
Development of machine learning model for reefer container failure determination and cause analysis with unbalanced data 원문보기

한국융합학회논문지 = Journal of the Korea Convergence Society, v.13 no.1, 2022년, pp.23 - 30  

이희원 (동아대학교 경영정보학과) ,  박성호 (동아대학교 경영정보학과) ,  이승현 (동아대학교 경영정보학과) ,  이승재 (동아대학교 경영정보학과) ,  이강배 (동아대학교 경영정보학과)

초록
AI-Helper 아이콘AI-Helper

냉동 컨테이너의 고장은 큰 비용의 손실을 야기하지만, 현재 냉동 컨테이너의 알람 체계는 효율성이 떨어진다. 기존에 냉동 시스템의 시뮬레이션 데이터를 활용한 연구는 존재하지만, 냉동 컨테이너의 실제 운영 데이터를 활용한 연구는 부족하다. 이에 본 연구는 실제 냉동 컨테이너 운영 데이터를 활용하여 고장 원인을 분류하였다. 실제 데이터에서는 데이터 불균형이 발생하였으며 ENN-SMOTE, 클래스 가중치를 둔 Logistic 회귀분석과 본 연구에서 개발한 2-stage 알고리즘을 비교하여 데이터 불균형문제를 해결하였다. 2-stage 알고리즘은 XGboost, LGBoost, DNN을 사용하여 첫 번째 단계에서는 고장 및 정상을 분류하고, 두 번째 단계에서는 고장의 원인을 분류하는 알고리즘이다. 2-stage 알고리즘에서 LGBoost를 사용한 모델이 99.16%의 정확도로 가장 우수하였다. 본 연구는 데이터 불균형을 해결하기 위해 2-stage 알고리즘을 활용한 최종모델을 제안하며 이는 다른 산업에도 활용할 수 있을 것으로 사료된다.

Abstract AI-Helper 아이콘AI-Helper

The failure of the reefer container causes a great loss of cost, but the current reefer container alarm system is inefficient. Existing studies using simulation data of refrigeration systems exist, but studies using actual operation data of refrigeration containers are lacking. Therefore, this study...

주제어

표/그림 (10)

참고문헌 (16)

  1. S. K. Park, Y. G. Park & Y. R. Shin. (2012). A Study on the Improvement of Damage to Reefer Container Cargo. Journal of Navigation and Port Research, 36(10), 803-810. DOI : 10.5394/KINPR.2012.36.10.803 

  2. P. Tang, O. A. Postolache, Y. Hao & M. Zhong. (2019). Reefer Container Monitoring System. In 2019 11th International Symposium on Advanced Topics in Electrical Engineering (ATEE) (pp. 1-6). IEEE. DOI : 10.1109/ATEE.2019.8724950 

  3. S. B. Yang (2018). A Study on the Monitering Systems of Reefer Containers. thesis dissertation. KOREA MARITIME & OCEAN UNIVERSITY. Busan.http://kmou.dcollection.net/common/orgView/200000016889 

  4. B. Jin, D. Li, S. Srinivasan, S. K. Ng, K. Poolla & A. Sangiovanni-Vincentelli. (2019). Detecting and diagnosing incipient building faults using uncertainty information from deep neural networks. In 2019 IEEE International Conference on Prognostics and Health Management (ICPHM). 1-8. DOI : 10.1109/ICPHM.2019.8819438 

  5. A. Kan, T. Wang, W. Zhu & D. Cao. (2021). The characteristics of cargo temperature rising in reefer container under refrigeration-failure condition. International Journal of Refrigeration, 123, 1-8. DOI : 10.1016/j.ijrefrig.2020.12.007 

  6. J. Loisel, S. Duret, A. Cornuejols, D. Cagnon, M. Tardet, E. Derens-Bertheau & O. Laguerre. (2021). Cold chain break detection and analysis: Can machine learning help?. Trends in Food Science & Technology, 112, 391-399. DOI : 10.1016/j.tifs.2021.03.052 

  7. Y. Fan, X. Cui, H. Han & H. Lu. (2020). Feasibility and improvement of fault detection and diagnosis based on factory-installed sensors for chillers. Applied Thermal Engineering, 164, 114506. DOI : 10.1016/j.applthermaleng.2019.114506 

  8. Y. Wang, Z. Wang, S. He & Z. Wang. (2019). A practical chiller fault diagnosis method based on discrete Bayesian network. International Journal of Refrigeration, 102, 159-167. DOI : 10.1016/j.ijrefrig.2019.03.008 

  9. G. Li, Y. Hu, H. Chen, L. Shen, H. Li, M. Hu & K. Sun. (2016). An improved fault detection method for incipient centrifugal chiller faults using the PCA-R-SVDD algorithm. Energy and Buildings, 116, 104-113. DOI : 10.1016/j.enbuild.2015.12.045 

  10. X. Liu, Y. Li, X. Liu & J. Shen. Fault diagnosis of chillers using very deep convolutional network. In 2018 Chinese Automation Congress (CAC) . IEEE. 1274-1279. DOI : 10.1109/CAC.2018.8623749 

  11. G. Li, Q. Yao, C. Fan, C. Zhou, G. Wu, Z. Zhou & X. Fang. (2021). An explainable one-dimensional convolutional neural networks based fault diagnosis method for building heating, ventilation and air conditioning systems. Building and Environment, 108057. DOI : 10.1016/j.buildenv.2021.108057 

  12. K. B. Lee, S. H. Park, S. H. Sung & D. M. Park. (2019). A Study on the Prediction of CNC Tool Wear Using Machine Learning Technique. Journal of the Korea Convergence Society, 10(10), 15-21. DOI : 10.15207/JKCS.2019.10.11.015 

  13. K. B. Lee, S. H. Park, H. W. Lee, S. H. Lee & S. J. Lee, (2021) A study on the 3-step classification algorithm for the diagnosis and classification of refrigeration system failures and their types. Journal of the Korea Convergence Society, 12(8), 31-37. DOI : 10.15207/JKCS.2021.12.8.031 

  14. Y. D. Yun, Y. Y. Yang, H. S. Ji & H. S. Lim, (2017) Development of Smart Senior Classification Model based on Activity Profile Using Machine Learning Method. Journal of the Korea Convergence Society, 8(1), 25-34, DOI : 10.15207/JKCS.2017.8.1.025 

  15. H. J. Park. (2020). Trend Analysis of Korea Papers in the Fields of 'Artificial Intelligence', 'Machine Learning' and 'Deep Learning'. Korea Information Electron Communication Technology, 13(4), 283-292. DOI : 10.17661/jkiiect.2020.13.4.283 

  16. A. More. (2016). Survey of resampling techniques for improving classification performance in unbalanced datasets. arXiv preprint arXiv:1608.06048 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로