최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.60 no.1, 2022년, pp.132 - 138
배서준 (국립부경대학교 화학공학과) , 임도진 (국립부경대학교 화학공학과)
In this study, a basic study was performed to systematically compare the changes in surface properties according to the post-processing method of the stereolithography (SLA) printing method, which is a photocuring 3D printing method, and to provide information on the post-processing method suitable ...
Duballet, R., Baverel, O. and Dirrenberger, J., "Classification of Building Systems for Concrete 3D Printing," Autom. Constr., 83, 247-258(2017).
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C. and Spence, D. M., "Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences," Anal. Chem. 86, 3240-3253(2014).
Bhatia, S. N. and Ingber, D. E., "Microfluidic Organs-on-chips," Nat. Biotechnol. 32, 760-772(2014).
He, Y., Wu, Y., Fu, J.-z., Gao, Q. and Qiu, J.-J., "Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review," Electroanalysis 28, 1658-1678(2016).
Lee, J.-Y., An, J. and Chua, C. K., "Fundamentals and Applications of 3D Printing for Novel Materials," Applied Materials Today 7, 120-133(2017).
Murphy, S. V. and Atala, A., "3D Bioprinting of Tissues and Organs," Nat. Biotechnol., 32, 773-785(2014).
Rupal, B. S., Garcia, E. A., Ayranci, C. and Qureshi, A. J., "3D Printed 3D-Microfluidics: Recent Developments and Design Challenges," J. Interg. Design & Process Sci., 22, 5-20(2018).
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B. and Breadmore, M. C., "3D Printed Microfluidic Devices: Enablers and Barriers," Lab Chip 16, 1993-2013(2016).
Chen, C., Mehl, B. T., Munshi, A. S., Townsend, A. D., Spence, D. M. and Martin, R. S., "3D-printed Microfluidic Devices: Fabrication, Advantages and Limitations-a Mini Review," Anal. Methods, 8, 6005-6012(2016).
Au, A. K., Huynh, W., Horowitz, L. F. and Folch, A., "3D-Printed Microfluidics," Angew. Chem. Int. Ed., 55, 3862-3881(2016).
Ho, C. M. B., Ng, S. H., Li, K. H. H. and Yoon, Y.-J., "3D Printed Microfluidics for Biological Applications," Lab Chip 15, 3627-3637(2015).
Gao, H., Kaweesa, D. V., Moore, J. and Meisel, N. A., "Investigating the Impact of Acetone Vapor Smoothing on the Strength and Elongation of Printed ABS Parts," JOM 69, 580-585(2017).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.