최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Design & manufacturing, v.16 no.2, 2022년, pp.26 - 32
이동혁 (한양대학교 건설환경공학과)
It is known that the fluidized bed incinerator, which is the subject of analysis, shows excellent performance in heat and mass transfer due to excellent mixing and contact performance between fluidized sand and fuel, and also shows relatively good combustion characteristics thanks to good mixing and...
Lee. Y.S., "A Study on the Setting of CFD Boundary Condition for Hot Flow Grate Type Incinerator", KOSCO Syoposium, 2010.
Yoo, C.K., "Discussion on the Practical Use of CFD for Grate Type Waste Incinerators", JJ. Korea Society for Computational Fluids Engineering, Vol. 7 No. 3 September, pp. 17-26, 2002.
Ko, Y.G., "Numerical Simulation of Waste Bed Combustion and Gas Flow in a Grate-type Waste Incinerator", KSME Syoposium, pp. 1244-1249, 2002.
Sung, D.M., "A Study on the Combustion Characteristics of the Small Grate Type Industrial Wastes Incinerator", J. KSWM. Vol. 14 No. 6 March, pp. 579-587, 1997.
Ahmed, S.A and Nejsd, A.S, "Velocity Measurement in a Research combustor Psrt 1 : Isothermal Swirling FLow", Experimental Thermal and Fluid Science, Vol 5, pp. 162~174, 1992.
Drake, M.C.and Blint, R.J., "Calculations of NOx Formation Pathways in Propagating Laminar, High Pressure Premixed CH4/Air Flames", Combustion Science and Technology, Vol 75, pp. 261-285, 1991.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.