참고문헌 (24)

1. J. K. Yeom and J. H. Yoon, "Study of behavior characteristics of emulsified fuels with evaporative field", Trans. Korean Soc. Mech. Eng. B, Vol. 39, No. 3, 2015, pp. 237-243, doi: https://doi.org/10.3795/KSME-B.2015.39.3.237. 

   원문보기 상세보기

2. J. K. Yeom and J. H. Yoon, "Basic study of spray-behavior characteristics of emulsified fuel", Trans. Korean Soc. Mech. Eng. B, Vol. 38, No. 9, 2014, pp. 763-771, doi: https://doi.org/10.3795/KSME-B.2014.38.9.763. 

   원문보기 상세보기

3. M. Huo, S. Lin, H. Liu, and C. F. Lee, "Study on the spray an d combustion characteristics of water-emulsified diese l", Fuel, Vol. 123, 2014, pp. 218-229, doi: https://doi.org/10.1016/j.fuel.2013.12.035. 

   상세보기

4. S. Y. No, "Application of bio-oils from lignocellulosic biomass to transportation, heat and power generation-a review", Renew Sustain Energy Rev., Vol. 40, 2014, pp. 1108-1125, doi: https://doi.org/10.1016/j.rser.2014.07.127. 

   상세보기

5. J. K. Yeom, S. H. Jung, and J. H. Yoon, "An experimental study on the application of oxygenated fuel to diesel engines", Fuel, Vol. 248, 2019, pp. 262-277, doi: https://doi.org/10.1016/j.fuel.2018.12.131. 

   상세보기

6. H. W. Lee, D. H. Oh, and Y. J. Seo, "Prediction of changes in filling time and temperature of hydrogen tank according t o SOC of hydrogen", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 4, 2020, pp. 345-350, doi: https://doi.org/10.7316/KHNES.2020.31.4.345. 

   원문보기 상세보기

7. B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equations of state", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 5, 2019, pp. 385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385. 

   원문보기 상세보기

8. Ministry of Economy and Finance, "2050 carbon neutral strategy of the republic of Korea", Ministry of Economy and Finance, 2020. Retrieved from https://www.korea.kr/archive/expDocView.do?docId39241. 

9. M. A. Bagherian and K. Mehranzamir, "A comprehensive review on renewable energy integration for combined heat and power production", Energy Conversion and Management, Vol. 224, 2020, pp. 113454, doi: https://doi.org/10.1016/j.enconman.2020.113454. 

   상세보기

10. M. Mahmoud, M. Ramadan, A. G. Olabi, K. Pullen, and S. Naher, "A review of mechanical energy storage systems combined with wind and solar applications", Energy Conversion and Management, Vol. 210, 2020, pp. 112670, doi: https://doi.org/10.1016/j.enconman.2020.112670. 

    상세보기

11. M. Li, Y. Bai, C. Zhang, Y. Song, S. Jiang, D. Grouset, and M. Zhang, "Review on the research of hydrogen storage system fast refueling in fuel cell vehicle", Int. J. Hydrog. Energy, Vol. 44, No. 21, 2019, pp. 10677-10693, doi: https://doi.org/10.1016/j.ijhydene.2019.02.208. 

    상세보기

12. J. Zheng, J. Guo, J. Yang, Y. Zhao, L. Zhao, X. Pan, J. Ma, and L. Zhang, "Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling", Int. J. Hydrog. Energy, Vol. 38, No. 25, 2013, pp. 10956-10962, doi: https://doi.org/10.1016/j.ijhydene.2013.02.053. 

    상세보기

13. J. Guo, J. Yang, Y. Zhao, X. Pan, L. Zhang, L. Zhao, and J. Zheng, "Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test", Int. J. Hydrog. Energy, Vol. 39, No. 25, 2014, pp. 13926-13934, doi: https://doi.org/10.1016/j.ijhydene.2014.03.097. 

    상세보기

14. N. de Muguel, R. O. Cebolla, B. Acosta, P. Moretto, F. Harskamp, and C. Bonato, "Compressed hydrogen tanks for on-board application: thermal behaviour during cycling", Int. J. Hydrog. Energy, Vol. 40, No. 19, 2015, pp. 6449-6458, doi: https://doi.org/10.1016/j.ijhydene.2015.03.035. 

    상세보기

15. C. P. Fowler, A. C. Orifici, and C. H. Wang, "A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage", Int. J. Hydrog. Energy, Vol. 41, No. 47, 2016, pp. 220647-22089, doi: https://doi.org/10.1016/j.ijhydene.2016.10.039. 

    상세보기

16. J. Zheng, X. Liu, P. Xu, P. Liu, Y. Zhao, and J. Yang, "Development of high pressure gaseous hydrogen storage technologies", Int. J. Hydrog. Energy, Vol. 37, No. 1, 2012, pp. 1048-1057, doi: https://doi.org/10.1016/j.ijhydene.2011.02.125. 

    상세보기

17. S. J. Ko, B. W. Kim, J. H. Park, G. H. Kang, and S. K. Lee, "Analysis of quenching performance of in-line flame arrester by analyzing temperature characteristics of body", Journal of the KNST, Vol. 3, No. 1, 2020, pp. 8-13, doi: https://doi.org/10.31818/JKNST.2020.03.3.1.8. 

    상세보기

18. Y. Okawa, S. Asano, C. Youn, S. Ikeda, and T. Kagawa, "Experimental research on a newly developed detonation flame arrester", SICE Annual Conference, 2008, pp. 1088-1091, doi: https://doi.org/10.1109/SICE.2008.4654819. 

    

19. H. I. Joo, K. Duncan, and G. Ciccarelli, "Flame-quenching performance of ceramic foam", Combustion Science and Technology, Vol. 178, No. 10-11, 2006, pp. 1755-1769, doi: https://doi.org/10.1080/00102200600788692. 

    상세보기

20. M. H. Mat Kiah and R. M. Kasmani, "Experimental study on premixed flame acceleration in closed pipe", Jurnal Teknologi, Vol. 62, No. 1, 2013, pp. 45-51, doi: https://doi.org/10.11113/jt.v62.1322. 

    상세보기

21. S. Z. sulaiman, R. M. Kasmani, and A. Mustafa, "Experimental study on the effect of curved tube of premixed hydrogen-air explosion", Journal of Engineering Science and Technology, Special Issue on SOMCHE 2014 & RSCE 2014 Conference, pp. 50-60, 2015. 

22. ANSYS, "ANSYS FLUENT theory guide", ANSYS, 2020. Retrieved from http://www.pmt.usp.br/academic/martoran/notasmodelosgrad/ANSYS%Fluent%Theory%Guide%15.pdf. 

23. R. Nowak, "Estimation of viscous and inertial resistance coefficients for various heat sink configurations", Procedia Engineering, Vol. 157, 2016, pp. 122-130, doi: https://doi.org/10.1016/j.proeng.2016.08.347. 

    상세보기

24. J. I. Lim, J. H. Park, J. H. Kim, and D. J. Kim, "Flow analysis of sea-water strainer", Korean Society for Fluid Machinery, 2009, pp. 333-334. Retrieved from https://www.dbpia.co.kr/Journal/articleDetail?nodeIdNODE01356715. 

저자의 다른 논문 :

김시범 (23) 최정주 (18)