[논문]Constructing a digital twin for estimating the response and load of a piping system subjected to seismic and arbitrary loads

Dongchang Kim; Gungyu Kim; Shinyong Kwag; Seunghyun Eem

doi:10.12989/sss.2023.31.3.275

Constructing a digital twin for estimating the response and load of a piping system subjected to seismic and arbitrary loads

Smart structures and systems, v.31 no.3, 2023년, pp.275 - 281

Dongchang Kim (School of Convergence & Fusion System Engineering, Major in Plant System Engineering, Kyungpook National University) , Gungyu Kim (School of Convergence & Fusion System Engineering, Major in Plant System Engineering, Kyungpook National University) , Shinyong Kwag (Department of Civil and Environmental Engineering, Hanbat National University) , Seunghyun Eem (School of Convergence & Fusion System Engineering, Major in Plant System Engineering, Kyungpook National University)

Abstract ▼ AI-Helper

In recent years, technological developments have rapidly increased the number of complex structures and equipment in the industrial. Accordingly, the prognostics and health monitoring (PHM) technology has become significant. The safety assessment of industrial sites requires data obtained by installing a number of sensors in the structure. Therefore, digital twin technology, which forms the core of the Fourth Industrial Revolution, is attracting attention in the safety field. The research on digital twin technology of structures subjected to seismic loads has been conducted recently. Hence, this study proposes a digital twin system that estimates the responses and arbitrary load in real time by utilizing the minimum sensor to a pipe that receives a seismic and arbitrary load. To construct the digital twin system, a finite-element model was created considering the dynamic characteristics of the pipe system, and then updating the finite-element model. In addition, the calculation speed was improved using a finite-element model that applied the reduced-order modeling (ROM) technology to achieve real-time performance. The constructed digital twin system successfully and rapidly estimated the load and the point where the sensor was not attached. The accuracy of the constructed digital twin system was verified by comparing the response of the digital twin model with that derived by using the load estimated from the digital twin model as input in the finite-element model.

주제어

참고문헌 (26)

Aivaliotis, P., Georgoulias, K. and Alexopoulos, K. (2019), "Using？digital twin for maintenance applications in manufacturing:？State of the Art and Gap analysis", Proceedings of 2019 IEEE？International Conference on Engineering, Technology and？Innovation (ICE/ITMC), Valbonne Sophia-Antipolis, France,？June.
Cho, S.H. (2019), "FE model updating of tall buildings using？output-only modal data", Transact. Korean Soc. Noise Vib.？Eng., 29(1), 131-140.？https://doi.org/10.5050/KSNVE.2019.29.1.131

상세보기
Cho, Y.B., Oh, S.I. and Kim, J.G. (2021), "Visualizing real-time？digital twin of structural vibration System Using augmented？reality", Korean Soc. Mech. Engrs., pp. 919-920, Jeju, Korea,？April.
Craig Jr, R.R. and Bampton, M.C. (1968), "Coupling of？substructures for dynamic analyses", AIAA Journal, 6(7), 1313-？1319. https://doi.org/10.2514/3.4741

상세보기
Hwang, S.B., Jeong, S.J. and Yoon, S.W. (2020), "The design of？manufacturing simulation modeling based on digital twin？concept", J. Korea Soc. Simul., 29(2), 11-20.？https://doi.org/10.9709/JKSS.2020.29.2.011

원문보기 상세보기
Hyun, P.S., Wan, S.S., Young, H.P. and Lee, Y.J. (2017), "Building？a new culture for quality management in the era of the Fourth？Industrial Revolution", Total Quality Manage. Business Excell.,？28(9-10), 934-945.？https://doi.org/10.1080/14783363.2017.1310703
Lagarias, J.C., Reeds, J.A., Wright, M.H. and Wright, P.E. (1998),？"Convergence Properties of the Nelder-Mead Simplex Method？in Low Dimensions", SIAM J. Optimiz., 9(1), 112-147.？https://doi.org/10.1137/S1052623496303470

상세보기
Lee, I.S. (2021), "A study on geospatial information role in digital？twin. Journal of the Korea Academia-Industrial Cooperation？Society", J. Korea Academia-Indust. Cooper. Soc., 22(3), 268-278. https://doi.org/10.5762/KAIS.2021.22.3.268

원문보기 상세보기
Levine, N.M. and Spencer Jr, B.F. (2022), "Post-earthquake？building evaluation using UAVs: A BIM-based digital twin？framework", Sensors, 22(3), 873.？https://doi.org/10.3390/s22030873

상세보기
Li, Y., Zhang, Z., Wang, W. and Feng, X. (2022), "Rapid？Estimation of Earthquake Fatalities in Mainland China Based on？Physical Simulation and Empirical Statistics-A Case Study of？the 2021 Yangbi Earthquake", Int. J. Environ. Res. Public？Health, 19(11), 6820. https://doi.org/10.3390/ijerph19116820.

상세보기
Lin, K., Xu, Y.L., Lu, X., Guan, Z. and Li, J. (2021), "Digital twin-based collapse fragility assessment of a long-span cable-stayed？bridge under strong earthquakes", Automat. Constr., 123,？103547. https://doi.org/10.1016/j.autcon.2020.103547

상세보기
Lin, K., Xu, Y.L., Lu, X., Guan, Z. and Li, J. (2022), "Digital twinbased life-cycle seismic performance assessment of a long-span？cable-stayed bridge", Bull. Earthq. Eng., 1-25.？https://doi.org/10.21203/rs.3.rs-1775095/v1
Moi, T., Cibicik, A. and Rolvag, T. (2020), "Digital twin based？condition monitoring of a knuckle boom crane: An experimental？study", Eng. Fail. Anal., 112, 104517.？https://doi.org/10.1016/j.engfailanal.2020.104517

상세보기
Nam, Y.W., Lee, S.H., Lee, D.G., Im, S.J. and Noh, S.D. (2020),？"Digital twin-based application for design of human-machine？collaborative assembly production lines", J. Korean Inst. Ind.？Eng., 46(1), 42-54.？https://doi.org/10.7232/JKIIE.2020.46.1.042

상세보기
NEA (2018), Integrity of Structures, Systems and Components？Under Design and Beyond Design Loads in Nuclear Power？Plants: Final Report of the Project on Metallic Component？Margins Under High Seismic Loads (MECOS), OECD？Publishing, Paris.
Newmark, N.M. (1959), "A method of computation for structural？dynamics", J. Eng. Mech. Div., 85(3), 67-94.？https://doi.org/10.1061/TACEAT.0008448

상세보기
Oh, S.I., Park, D.U., Baek, H.W., Kim, S.H., Lee, J.K. and Kim,？J.G. (2020), "Virtual sensing system of structural vibration？using digital twin", Trans. Korean Soc. Noise Vib. Eng., 30(2),？149-160. https://doi.org/10.5050/KSNVE.2020.30.2.149

상세보기
Rabiepour, M., Chase, J.G. and Zhou, C. (2022), "Lessons from？Earthquake-affected Structures: The Necessity of Structural？Health Monitoring and Instrumentation".？https://doi.org/10.21203/rs.3.rs-1772320/v1
Rasheed, A., San, O. and Kvamsdal, T. (2020), "Digital twin:？Values, challenges and enablers from a modeling perspective",？IEEE Access, 8, 21980-22012.？https://doi.org/10.1109/ACCESS.2020.2970143

상세보기
Setyogroho, B., Muslim, D., Sadewo, M.S., Muslim, G.O.,？Burhanuddin, S. and Hendarmawan, H. (2022), "Correlation？between Building Damages and Losses with the Microzonation？Map of Mataram-Case Study: Lombok Earthquake 2018,？Indonesia". Sustainability, 14(4), 2028.？https://doi.org/10.3390/su14042028

상세보기
Shin, S.H. and Park, M.C. (2020), "Implementation of digital twin？based building control system using wireless sensor box", J.？Korea Soc. Comput. Inform., 25(5), 57-64.？https://doi.org/10.9708/jksci.2020.25.05.057

원문보기 상세보기
Sorooshian, S. and Panigrahi, S. (2020), "Impacts of the 4th？Industrial Revolution on Industries", Walailak J. Sci. Technol.？(WJST), 17(8), 903-915.？https://doi.org/10.48048/wjst.2020.7287
Thompson, M.K. and Thompson, J.M. (2017), ANSYS mechanical？APDL for finite element analysis, Butterworth-Heinemann,？Kidlington, Oxfordshire, England.
Tian, H., Liang, N., Zhao, P., Wang, X., Zhu, C., Zhang, S., et al.？(2017), "Model updating approach for icing forecast of？transmission lines by using particle swarm optimization",？Proceedings of IOP Conference Series: Materials Science and？Engineering, 207(1), pp. 012070.？https://doi.org/10.1088/1757-899X/207/1/012070

상세보기
UNDRR (2020), The human cost of disasters: an overview of the？last 20 years (2000-2019). Retrieved from: Human Cost of？Disasters (2000-2019), UN Office for Disaster Risk Reduction,？Geneva, Switzerland.
Ye, C., Butler, L., Calka, B., Iangurazov, M., Lu, Q., Gregory, A.？and Middleton, C. (2019), "A digital twin of bridges for？structural health monitoring", Structural Health Monitoring？2019: Enabling Intelligent Life-Cycle Health Management for？Industry Internet of Things (IIOT) - Proceedings of the 12th？International Workshop on Structural Health Monitoring, 1619-1626. https://doi.org/10.12783/shm2019/32287

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Constructing a digital twin for estimating the response and load of a piping system subjected to seismic and arbitrary loads

Abstract ▼ AI-Helper

주제어

참고문헌 (26)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트