$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

막 형성 기술 및 특성과의 상관관계 연구 및 성능: 리뷰
Studies of the Membrane Formation Techniques and Its Correlation with Properties and Performance: A Review 원문보기

멤브레인 = Membrane Journal, v.33 no.3, 2023년, pp.110 - 126  

쿠마리 니키타 (경상대학교 그린에너지융합기술연구소) ,  치부쿨라 나라야나 머티 (더 마라하자 사야이라오 대학교 기술공학부 응용화학과) ,  남상용 (경상대학교 그린에너지융합기술연구소)

초록
AI-Helper 아이콘AI-Helper

이 총설에서는 다양한 소재를 이용한 고분자 분리막의 제조를 위한 제조방식, 특성과 여러가지 인자들에 대해서 논의하고자 한다. 분리막 제조방식은 상전이, 계면중합, 연신, 트랙에칭 그리고 전기방사 같은 방법을 주로 강조하여 설명하고자 하며, 추가적으로 다양한 응용에 따른 제조방식에 대한 한계나 응용성에 대해서도 설명하고자 한다. 또한 다양한 고분자 분리막의 표면거칠기, 표면장력, 표면전하와 표면의 기능성 작용기 같은 표면특성에 대해서도 정리하였으며, 막성능의 향상을 위하여 상전이법이나 계면중합 같은 일반적인 분리막 제조공정에서 필요한 추가적인 향상방법을 나타내었다. 트랙에칭이나 전기방사와 같은 새로운 제조방법의 가능성에 대해서도 분석하였다.

Abstract AI-Helper 아이콘AI-Helper

In this review, the approaches, properties, and elements involved in the formation of polymeric membranes for various materials are discussed. The present research emphasizes the proficiency in several membrane formation processes such phase inversion, interfacial polymerization, stretching, track e...

주제어

참고문헌 (102)

  1. J. C. Crittenden, R. R. Trussel, D. W. Hand, K. J.?Howe, and G. Tchobanoglous, "Water Treatment:?principles and design", 2nd ed., John Wiley &?Sons, Inc., Hoboken, NJ (2005). 

  2. M. Cheryan, "Ultrafiltration and microfiltration?handbook", Technomic, Lancaster, PA (1998). 

  3. M. Mulder, "Basic principles of membrane technology", Kluwer Academic Publishers, Dordrecht,?Netherlands (2003). 

  4. J. Xu, and R. Agrawal, "Membrane separation?process analysis and design strategies based on?thermodynamic efficiency of permeation", Chem.?Eng. Sci., 51, 365 (1996). 

  5. M. Mulder, "Basic principles of membrane technology", Springer Science & Business Media,?Dordrecht, The Netherlands (2012). 

  6. P. Radovanovic, S. W. Thiel, and S. T. Hwang,?"Formation of asymmetric polysulfone membranes?by immersion precipitation. 1. Modeling mass-transport during gelation", J. Membr. Sci., 65, 213?(1992). 

  7. S. S. S. Loeb, "Sea water demineralization by?means of an osmotic membrane", Mater. Sci., 38,?117 (1963). 

  8. H. Strathmann, K. Kock, P. Amar, and R. W.?Baker, "Formation mechanism of asymmetric membranes", Desalination, 16, 179 (1975). 

  9. C. A. Smolders, A. J. Reuvers, R. M. Boom, and?I. M. Wienk, "Microstructures in phaseinversion-membranes. Part 1. Formation of macrovoids", J.?Membr. Sci., 73, 259 (1992). 

  10. M. Ulbricht, "Advanced functional polymer membranes", Polymer, 47, 2217 (2006). 

  11. Km Nikita, D. Patel, and G. Patel, "Additive manufacturing of multifunctional polymer nanocomposites:?From 3 D to 4 D", p. 277, Nanotechnology-Based?Additive Manufacturing: Product Design, Properties?and Applications, Wiley, Weinheim, Germany (2023). 

  12. H. J. Kim, R. K. Tyagi, A. E. Fouda, and K.?Jonasson, "The kinetic study for asymmetric membrane formation via phase-inversion process", J.?Appl. Polym. Sci., 62, 621 (1996). 

  13. D. Patel, R. Vithalani, and C. K. Modi, "Highly?efficient FeNP-embedded hybrid bifunctional reduced graphene oxide for Knoevenagel condensation?with active methylene compounds", New J. Chem.,?44, 2868 (2020). 

  14. M. Amirilargani, E. Saljoughi, T. Mohammadi, and?M. R. Moghbeli, "Effects of coagulation bath temperature and polyvinylpyrrolidone content on flat?sheet asymmetric polyethersulfone membranes",?Polym. Eng. Sci., 50, 885 (2010). 

  15. Km Nikita, S. Kumar, V. K. Aswal, D. K.?Kanchan, and C. N. Murthy, "Porous structure?studies of the mixed matrix polymeric membranes?of polyether sulfone incorporated with functionalized multiwalled carbon nanotubes", Desal. Wat.?Treat., 146, 29 (2019). 

  16. I. Pinnau and B. D. Freeman, "Formation and?modification of polymeric membranes: overview",?Membr. Form. Modif., 744, 1 (2000). 

  17. W. Y. Chuang, T. H. Young, W. Y. Chiu, and C.?Y. Lin, "The effect of polymeric additives on the?structure and permeability of poly(vinyl alcohol)?asymmetric membranes", Polymer, 41, 5633 (2000). 

  18. L. Y. Lafreniere, F. D. F. Talbot, T. Matsuura,?and S. Sourirajan, "Effect of polyvinylpyrrolidone?additive on the performance of polyethersulfone ultrafiltration membranes", Ind. Eng. Chem. Res., 26,?2385 (1987). 

  19. E. Fontananova, J. C. Jansen, A. Cristiano, E.?Curcio, and E. Drioli, "Effect of additives in the?casting solution on the formation of PVDF membranes", Desalination, 192, 190 (2006). 

  20. H. J. Lee, J. Won, H. Lee, and Y. S. Kang,?"Solution properties of poly(amic acid)-NMP containing LiCl and their effects on membrane morphologies", J. Membr. Sci., 196, 267 (2002). 

  21. E. Saljoughi, M. Amirilargani, and T. Mohammadi,?"Effect of poly(vinyl pyrrolidone) concentration?and coagulation bath temperature on the morphology, permeability, and thermal stability of asymmetric cellulose acetate membranes", J. Appl. Polym.?Sci., 111, 2537 (2009). 

  22. L. Shi, R. Wang, Y. M. Cao, D. T. Liang, and J.?H. Tay, "Effect of additives on the fabrication of?poly (vinylidene fluoride-co-hexafluropropylene)?(PVDF-HFP) asymmetric microporous hollow fiber?membranes", J. Membr. Sci., 315, 195 (2008). 

  23. N. A. Ochoa, P. Pradanos, L. Palacio, C. Pagliero,?J. Marchese, and A. Hernandez, "Pore size distributions based on AFM imaging and retention of?multidisperse polymer solutes - characterisation of?polyethersulfone UF membranes with dopes containing different PVP", J. Membr. Sci., 187, 227?(2001). 

  24. M. Z. Rong, M. Q. Zhang, Y. X. Zheng, H. M.?Zeng, R. Walter, and K. Friedrich, "Structure property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites",?Polymer, 42, 167 (2001). 

  25. L. Y. Ng, A. W. Mohammad, C. P. Leo, and N.?Hilal, "Polymeric membranes incorporated with?metal/metal oxide nanoparticles: a comprehensive?review", Desalination, 308, 15 (2013). 

  26. K. Zodrow, L. Brunet, S. Mahendra, D. Li, A.?Zhang, Q. L. Li, and P. J. J. Alvarez, "Polysulfone?ultrafiltration membranes impregnated with silver?nanoparticles show improved biofouling resistance?and virus removal", Water Res., 43, 715 (2009). 

  27. L. Yan, Y. S. Li, C. B. Xiang, and S. Xianda,?"Effect of nano-sized Al2O3-particle addition on?PVDF ultratiltration membrane performance", J.?Membr. Sci., 276, 162 (2006). 

  28. Y. N. Yang, H. X. Zhang, P. Wang, Q. Z. Zheng,?and J. Li, "The influence of nano-sized TiO2 fillers on the morphologies and properties of PSFUF?membrane", J. Membr. Sci., 288, 231 (2007). 

  29. Q. T. Nguyen, O. T. Alaoui, H. Yang, and C.?Mbareck, "Dry-cast process for synthetic microporous membranes: physico-chemical analyses through?morphological studies", J. Membr. Sci., 358, 13?(2010). 

  30. J. K. Kim, K. Taki, and M. Ohshima, "Preparation?of a unique microporous structure via two step?phase separation in the course of drying a ternary?polymer solution", Langmuir, 23, 12397 (2007). 

  31. J. Zhao, G. Luo, J. Wu, and H. Xia, "Preparation?of microporous silicone rubber membrane with tunable pore size via solvent evaporation-induced?phase separation", ACS Appl. Mater. Interfaces, 5,?2040 (2013). 

  32. G. Conoscenti, V. Carrubba, and V. Brucato, "A?versatile technique to produce porous polymeric?scaffolds: the thermally induced phase separation?(TIPS) method", Arch. Chem. Res., 1, 1 (2017). 

  33. Z. Cui, N. T. Hassankiadeh, S. Y. Lee, J. M. Lee,?K. T. Woo, A. Sanguineti, V. Arcella, Y. M. Lee,?and E. Drioli, "Poly (vinylidene fluoride) membrane preparation with an environmental diluent?via thermally induced phase separation", J. Membr.?Sci., 444, 223 (2013). 

  34. Q. Y. Wu, L. S. Wan, and Z. K. Xu, "Structure?and performance of polyacrylonitrile membranes?prepared via thermally induced phase separation",?J. Membr. Sci., 409, 355 (2012). 

  35. C. Zhang, Y. Bai, Y. Sun, J. Gu, and Y. Xu,?"Preparation of hydrophilic HDPE porous membranes via thermally induced phase separation by?blending of amphiphilic PE-b-PEG copolymer", J.?Membr. Sci., 365, 216 (2010). 

  36. J. E. Cadotte, R. J. Petersen, R. E. Larson, and E.?E. Erickson, "New thin-film composite seawater?reverse-osmosis membrane", Desalination, 32, 25?(1980). 

  37. J. Cadotte, R. Forester, M. Kim, R. Petersen, and?T. Stocker, "Nanofiltration membranes broaden the?use of membrane separation technology", Desalination,?70, 77 (1988). 

  38. W. J. Lau, A. F. Ismail, N. Misdan, and M. A.?Kassim, "A recent progress in thin film composite membrane: A review", Desalination, 287, 190 (2012). 

  39. R. J. Petersen, "Composite reverse-osmosis and?nanofiltration membranes", J. Membr. Sci., 83, 81?(1993). 

  40. A. P. Rao, N. V. Desai, and R. Rangarajan,?"Interfacially synthesized thin film composite RO?membranes for seawater desalination", J. Membr.?Sci., 124, 263 (1997). 

  41. I. J. Roh, A. R. Greenberg, and V. P. Khare,?"Synthesis and characterization of interfacially?polymerized polyamide thin films", Desalination,?191, 279 (2006). 

  42. A. K. Ghosh, B. H. Jeong, X. F. Huang, and E.?M. V. Hoek, "Impacts of reaction and curing conditions on polyamide composite reverse osmosis?membrane properties", J. Membr. Sci., 311, 34?(2008). 

  43. B. J. Abu Tarboush, D. Rana, T. Matsuura, H. A.?Arafat, and R. M. Narbaitz, "Preparation of?thin-film-composite polyamide membranes for desalination using novel hydrophilic surface modifying macromolecules", J. Membr. Sci., 325, 166?(2008). 

  44. S. Verissimo, K. V. Peinemann, and J. Bordado,?"Influence of the diamine structure on the nanofiltration performance, surface morphology and surface charge of the composite polyamide membranes", J. Membr. Sci., 279, 266 (2006). 

  45. S. H. Huang, C. L. Li, C. C. Hu, H. A. Tsai, K.?R. Lee, and J. Y. Lai, "Polyamide thin-film composite membranes prepared by interfacial polymerization for pervaporation separation", Desalination,?200, 387 (2006). 

  46. A. R. Korikov, R. Kosaraju, and K. K. Sirkar,?"Interfacially polymerized hydrophilic microporous?thin film composite membranes on porous polypropylene hollow fibers and flat films", J. Membr.?Sci., 279, 588 (2006). 

  47. L. Li, S. B. Zhang, X. S. Zhang, and G. D.?Zheng, "Polyamide thin film composite membranes?prepared from 3,4',5-biphenyl triacyl chloride,?3,3',5,5'-biphenyl tetraacyl chloride and m-phenylenediamine", J. Membr. Sci., 289, 258 (2007). 

  48. L. F. Liu, S. C. Yu, L. G. Wu, and C. J. Gao,?"Study on a novel antifouling polyamide-urea reverse osmosis composite membrane (ICIC-MPD)?- III. Analysis of membrane electrical properties",?J. Membr. Sci., 310, 119 (2008). 

  49. P. R. Buch, D. J. Mohan, and A. V. R. Reddy,?"Preparation, characterization and chlorine stability?of aromatic-cycloaliphatic polyamide thin film?composite membranes", J. Membr. Sci., 309, 36?(2008). 

  50. T. Kawaguchi, and H. Tamura, "Chlorine-resistant?membrane for reverse-osmosis. I. Correlation between chemical structures and chlorine resistance?of polyamides", J. Appl. Polym. Sci., 29, 3359?(1984). 

  51. N. Misdan, W. J. Lau, and A. F. Ismail, "Seawater?Reverse Osmosis (SWRO) desalination by thin-film?composite membrane-current development, challenges and future prospects", Desalination, 287,?228 (2012). 

  52. B. B. Tang, Z. B. Huo, and P. Y. Wu, "Study on?a novel polyester composite nanofiltration membrane by interfacial polymerization of triethanolamine (TEOA) and trimesoyl chloride (TMC) I.?Preparation, characterization and nanofiltration?properties test of membrane", J. Membr. Sci., 320,?198 (2008). 

  53. U. Razdan and S. S. Kulkarni, "Nanofiltration?thin-film-composite polyesteramide membranes based?on bulky diols", Desalination, 161, 25 (2004). 

  54. T. Sarada, L. C. Sawyer, and M. I. Ostler, "Three?dimensional structure of celgard® microporous?membranes", J. Membr. Sci., 15, 97 (1983). 

  55. Km Nikita, D. Ray, V. K. Aswal, and C. N.?Murthy, "Surface modification of functionalized?multiwalled carbon nanotubes containing mixed?matrix membrane using click chemistry", J. Memb.?Sci., 596, 117710 (2020). 

  56. A. A. I. A. S. Komaladewi, P. T. P. Aryanti, G.?Lugito, I. W. Surata, and I. G. Wenten, "Recent?progress in microfiltration polypropylene membrane fabrication by stretching method", E3S Web of?Conferences, 03018, Bali, Indonesia (2018). 

  57. F. Sadeghi, "Development of microporous polypropylene by stretching", Ph.D. Thesis, Polytechnique?Montreal, Montreal, Canada (2006). 

  58. C. Wan, T. Cao, X. Chen, L. Meng, and L. Li,?"Fabrication of polyethylene nanofibrous membranes?by biaxial stretching", Mater. Today Commun., 17,?24 (2018). 

  59. J. F. Kim, J. T. Jung, H. H. Wang, S. Y. Lee, T.?Moore, A. Sanguineti, E. Drioli, and Y. M. Lee,?"Microporous PVDF membranes via thermally induced phase separation (TIPS) and stretching methods", J. Membr. Sci., 509, 94 (2016). 

  60. U. Pinaeva, T. C. M. Dietz, E. Balanzat, M.?Castellino, T. L. Wade, and M. C. Clochard, "Bis?2-(methacryloyloxy)ethyl phosphate radiografted into track-etched PVDF for uranium (VI) determination by means of cathodic stripping voltammetry", React. Funct. Polym., 142, 77 (2019). 

  61. A. Shiohara, B. Prieto-Simon, and N. H. Voelcker,?"Porous polymeric membranes: fabrication techniques and biomedical applications", J. Mater. Chem.?B, 9, 2129 (2021). 

  62. L. Madauss, J. Schumacher, M. Ghosh, O.?Ochedowski, J. Meyer, H. Lebius, B. Ban-d'Etat,?M. E. Toimil-Molares, C. Trautmann, and R. G.?Lammertink, "Fabrication of nanoporous graphene/polymer composite membranes", Nanoscale, 9,?10487 (2017). 

  63. T. Ma, J. M. Janot, and S. Balme, "Track-etched?nanopore/membrane: from fundamental to applications", Small Methods, 4, 2000366 (2020). 

  64. F. Liu, M. Wang, X. Wang, P. Wang, W. Shen, S.?Ding, and Y. Wang, "Fabrication and application?of nanoporous polymer ion-track membranes",?Nanotechnology, 30, 052001 (2018). 

  65. P. Apel, "Track etching technique in membrane?technology", Radiat. Meas., 34, 559 (2001). 

  66. S. Rafiei, S, Maghsoodloo, B. Noroozi, V.?Mottaghitalab, and A. Haghi, "Mathematical modeling in electrospinning process of nanofibers: A?detailed review", Cellul. Chem. Technol., 47, 323?(2013). 

  67. B. Bera, "Literature review on electrospinning?process (A fascinating fiber fabrication technique)",?Imper. J. Interdiscipl. Res., 2, 972 (2016). 

  68. K. Li, D. Hou, C. Fu, K. Wang, and J. Wang,?"Fabrication of PVDF nanofibrous hydrophobic?composite membranes reinforced with fabric substrates via electrospinning for membrane distillation?desalination", J. Environ. Sci., 75, 277 (2019). 

  69. Z. Li, C. Wang and O. D. Nanostructures, "One-dimensional nanostructures: Electrospinning technique and unique nanofibers", Springer, London (2013). 

  70. C. J. Anandharamakrishnan, "Electrospinning and?electrospraying techniques: potential food based applications", Trends Food Sci. Technol., 38, 21?(2014). 

  71. Y. Li, J. Zhu, H. Cheng, G. Li, H. Cho, M. Jiang,?Q. Gao, and X. Zhang, "Developments of advanced electrospinning techniques: A critical review", Adv. Mater. Technol., 6, 2100410 (2021). 

  72. A. Maria Din'a, H. Georg, and G. Rolf, "Streaming?potential measurements to assess the variation of?nanofiltration membranes surface charge with the?concentration of salt solutions", Separ. Purif. Technol.,?529, 22 (2001). 

  73. M. R. De Guzman, C. K. A. Andra, M. B. M. Y?Ang, G. V. C. Dizon, A. R. Caparanga, S. H.?Huang, and K. R. Lee, "Increased performance and?antifouling of mixed-matrix membranes of cellulose acetate with hydrophilic nanoparticles of polydopamine-sulfobetaine methacrylate for oil-water?separation", J. Membr. Sci., 620, 118881 (2021). 

  74. Km Nikita, P. Karkare, D. Ray, V. K. Aswal, P.?S. Singh, and C. N. Murthy, "Understanding the?morphology of MWCNT/PES mixed-matrix membranes using SANS: Interpretation and rejection?performance", Appl. Water Sci., 9, 1 (2019). 

  75. Z. Wang, J. Jin, D. Hou, and S. Lin, "Tailoring?surface charge and wetting property for robust?oil-fouling mitigation in membrane distillation", J.?Membr. Sci., 516, 113 (2016). 

  76. A. E. Childress and M. Elimelech, "Effect of solution chemistry on the surface charge of polymeric?reverse osmosis and nanofiltration membranes", J.?Membr. Sci., 119, 253 (1996). 

  77. Km Nikita, D. S. Chivukula, and C. N. Murthy,?"Uniquely modified polyether sulphone and f-CNTs?Mixed Matrix Membranes for enhanced water?transport& reduced biofouling", Desal. Wat. Treat.,?245, 16 (2022). 

  78. E. M. Vrijenhoek, S. Hong, and M. Elimelech,?"Influence of membrane surface properties on initial rate of colloidal fouling of reverse osmosis and?nanofiltration membranes", J. Membr. Sci., 188,?115 (2001). 

  79. W. R. Bowen, and T. A. Doneva, "Atomic force?microscopy studies of membranes: Effect of surface roughness on double-layer interactions and?particle adhesion", J. Colloid Interface Sci., 229,?544 (2000). 

  80. K. Boussu, A. Belpaire, A. Volodin, C. Van?Haesendonck, P. Van der Meeren, C. Vandecasteele,?and B. Van der Bruggen, "Influence of membrane?and colloid characteristics on fouling of nanofiltration membranes", J. Membr. Sci., 289, 220?(2007). 

  81. N. Park, B. Kwon, I. S. Kim, and J. W. Cho,?"Biofouling potential of various NF membranes?with respect to bacteria and their soluble microbial?products (SMP): characterizations, flux decline, and?transport parameters", J. Membr. Sci., 258, 43?(2005). 

  82. S. Y. Kwak, and D. W. Ihm, "Use of atomic force?microscopy and solid-state NMR spectroscopy to?characterize structure-property-performance correlation in high flux reverse osmosis (RO) membranes", J. Membr. Sci., 158, 143 (1999). 

  83. D. F. Stamatialis, C. R. Dias, and M. N. de Pinho,?"Atomic force microscopy of dense and asymmetric cellulose-based membranes", J. Membr. Sci.,?160, 235 (1999). 

  84. G. Z. Ramon, and E. M. V. Hoek, "Transport?through composite membranes, part 2: impacts of?roughness on permeability and fouling", J. Membr.?Sci., 425, 141 (2013). 

  85. S. Al-Jeshi, and A. Neville, "An investigation into?the relationship between flux and roughness on RO?membranes using scanning probe microscopy",?Desalination, 189, 221 (2006). 

  86. X. Jin, X. F. Huang, and E. M. V. Hoek, "Role of?specific ion interactions in seawater RO membrane?fouling by alginic acid", Environ. Sci. Technol.,?43, 3580 (2009). 

  87. K. Darcovich, and O. Kutowy, "Surface tension?considerations for membrane casting systems", J.?Appl. Polym. Sci., 35, 1769 (1988). 

  88. S. Goh, J. Zhang, Y. Liu, and A. G. Fane, "Fouling?and wetting in membrane distillation (MD) and?MD-bioreactor (MDBR) for wastewater reclamation", Desalination, 323, 39 (2013). 

  89. E. J. Lee, B. J. Deka, and A. K. An, "Reinforced?superhydrophobic membrane coated with aerogel-assisted polymeric microspheres for membrane?distillation", J. Membr. Sci., 573, 570 (2019) 

  90. K. J. Lu, Y. Chen, and T. S. Chung, "Design of?omniphobic interfaces for membrane distillation-a?review", Water Res., 162, 64 (2019). 

  91. A. Bernal-Ball'en, I. Kuritka, and P. Saha,?"Preparation and characterization of a bioartificial?polymeric material: Bilayer of cellulose acetatePVA", Int. J. Polym. Sci., 2016 (2016). 

  92. X. Yu, X. Mi, Z. He, M. Meng, H. Li, and Y.?Yan, "Fouling resistant CA/PVA/TiO 2 imprinted?membranes for selective recognition and separation?salicylic acid from waste water", Front. Chem., 5,?2 (2017). 

  93. E. Fontananova, V. Grosso, S. A. Aljlil., M. A.?Bahattab, D. Vuono, F. P. Nicoletta, E. Curcio, E.?Drioli, and G. D. Profio, "Effect of functional?groups on the properties of multiwalled carbon?nanotubes/polyvinylidenefluoride composite membranes", J. Membr. Sci., 541, 198 (2017). 

  94. G. M. Patel, V. Shah, J. Bhaliya, P. Pathan, and?Km Nikita, "Polymer-based nanomaterials: An introduction", Smart Polymer Nanocomposites, pp. 27-59, Elsevier, Gujarat, India (2023). 

  95. J. G. A. Bitter, "Effect of crystallinity and swelling on the permeability and selectivity of polymer?membranes", Desalination, 51, 19 (1984). 

  96. S. G. Gholap, J. P. Jog, and M. V. Badiger,?"Synthesis and characterization of hydrophobically?modified poly(vinyl alcohol) hydrogel membrane",?Polymer, 45, 5863 (2004). 

  97. S. J. Lue, D. T. Lee, J. Y. Chen, C. H. Chiu, C.?C. Hu, Y. C. Jean, and J. Y. Lai, "Diffusivity enhancement of water vapor in poly(vinyl alcohol)-fumed silica nano-composite membranes: correlation with polymer crystallinity and free-volume?properties", J. Membr. Sci., 325, 831 (2008). 

  98. L. Y. Yu, Z. L. Xu, H. M. Shen, and H. Yang,?"Preparation and characterization of PVDF- SiO 2 ?composite hollow fiber UF membrane by sol-gel?method", J. Membr. Sci., 337, 257 (2009). 

  99. F. Peng, Z. Jiang, and E. M. V. Hoek, "Tuning?the molecular structure, separation performance and?interfacial properties of poly(vinyl alcohol)-poly-sulfone interfacial composite membranes", J. Membr.?Sci., 368, 26 (2011). 

  100. M. Minelli, M.G. Baschetti, F. Doghieri, M.?Ankerfors, T. Lindstrom, I. Siro, and D. Plackett,?"Investigation of mass transport properties of microfibrillated cellulose (MFC) films", J. Membr.?Sci., 358, 67 (2010). 

  101. S. R. Ravichandran, C. D. Venkatachalam, M.?Sengottian, S. Sekar, B. S. S. Ramasamy, M.?Narayanan, A. V. Gopalakrishnan, S. Kandasamy,?and R. Raja, "A review on fabrication, characterization of membrane and the influence of various?parameters on contaminant separation process",?Chemosphere, 306, 135629 (2022). 

  102. B. S. Lalia, V. Kochkodan, R. Hashaikeh, and N.?Hilal, "A review on membrane fabrication: Structure,?properties and performance relationship", Desalination,?326, 77 (2013) 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로