최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기멤브레인 = Membrane Journal, v.33 no.3, 2023년, pp.127 - 136
강현우 (경상국립대학교 에너지공학과) , 황두성 (한양대학교 에너지공학과) , 박치훈 (경상국립대학교 에너지공학과) , 이영무 (한양대학교 에너지공학과)
In this study, the electrochemical performance of a 5-layer fuel cell stack using silica composite membranes as polymer electrolyte membranes was evaluated. It was observed that the flow rate of the fuel gases plays a crucial role in stack performance, particularly being mainly dependent on the flow...
A. J. Appleby and F. R. Foules, "Fuel cell handbook", Van Nostrand Reinhold, New York, USA (1989).
H. Kang and C. H. Park, "Effect of Nafion® chain length on proton transport as a binder material", Membr. J., 30, 57 (2020).
B. C. Steele and A. Heinzel, "Materials for fuel-cell technologies", Nature, 414, 345 (2001).
M. Winter and R. J. Brodd, "What are batteries, fuel cells, and supercapacitors?", Chem. Rev., 104, 4245 (2004).
W. Vielstich, A. Lamm, and H. Gasteiger, "Handbook of fuel cells. Fundamentals, technology, applications", John Wiley & Sons, New York, USA (2003).
U. Soupremanien, S. Le Person, M. Favre-Marinet, and Y. Bultel, "Tools for designing the cooling system of a proton exchange membrane fuel cell", Appl. Therm. Eng., 40, 161 (2012).
M. R. Islam, B. Shabani, and G. Rosengarten, "Nanofluids to improve the performance of PEM fuel cell cooling systems: A theoretical approach", Applied Energy, 178, 660 (2016).
A. Friedl, S. Fraser, W. R. Baumgartner, and V. Hacker, "Experimental analysis of internal gas flow configurations for a polymer electrolyte membrane fuel cell stack", J. Power Sources, 185, 248 (2008).
R. Jinnouchi and K. Okazaki, "Molecular dynamics study of transport phenomena in perfluorosulfonate ionomer membranes for polymer electrolyte fuel cells", J. Electrochem. Soc., 150, E66 (2002).
C. H. Park, S. Y. Nam, and Y. T. Hong, "Molecular dynamics (MD) study of proton exchange membranes for fuel cells", Membr. J., 26, 329 (2016).
H. Kang, M. Cheon, C. H. Lee, T.-H. Kim, Y. T. Hong, S. Y. Nam, and C. H. Park, "Mesoscale simulation based on the dynamic mean-field density functional method on block-copolymeric ionomers for polymer electrolyte membranes", Membranes, 13, 258 (2023).
K.-D. Kreuer, "Proton conductivity: Materials and applications", Chem. Mater., 8, 610 (1996).
M. A. Hickner, H. Ghassemi, Y. S. Kim, B. R. Einsla, and J. E. McGrath, "Alternative polymer systems for proton exchange membranes (PEMs)", Chem. Rev., 104, 4587 (2004).
J. Larminie, A. Dicks, and M. S. McDonald, "Fuel cell systems explained", Vol. 2, J. Wiley Chichester, UK, 2003.
Y. Wang, S. J. Moura, S. G. Advani, and A. K. Prasad, "Power management system for a fuel cell/battery hybrid vehicle incorporating fuel cell and battery degradation", Int. J. Hydrogen Energy, 44, 8479 (2019).
S. Ma, M. Lin, T.-E. Lin, T. Lan, X. Liao, F. Marechal, Y. Yang, C. Dong, and L. Wang, "Fuel cell-battery hybrid systems for mobility and off-grid applications: A review", Renew. Sust. Energ. Rev., 135, 110119 (2021).
C. H. Park, H. S. Kim, and Y. M. Lee, "Surface modification of proton exchange membrane by introduction of excessive amount of nanosized silica", Membr. J., 24, 301 (2014).
D. S. Hwang, C. H. Park, S. C. Yi, and Y. M. Lee, "Optimal catalyst layer structure of polymer electrolyte membrane fuel cell", Int. J. Hydrogen Energy, 36, 9876 (2011).
S. Shimpalee, M. Ohashi, J. Van Zee, C. Ziegler, C. Stoeckmann, C. Sadeler, and C. Hebling, "Experimental and numerical studies of portable PEMFC stack", Electrochim. Acta, 54, 2899 (2009).
N. Cheng, S. Mu, M. Pan, and P. P. Edwards, "Improved lifetime of PEM fuel cell catalysts through polymer stabilization", Electrochem. Commun., 11, 1610 (2009).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.