$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

이산화탄소/수소 분리용 중공사형 기체분리막의 제조 및 특성
Preparation and Properties of Hollow Fiber Membrane for CO2/H2 Separation 원문보기

멤브레인 = Membrane Journal, v.33 no.4, 2023년, pp.222 - 232  

고형철 (한국산업기술시험원 환경기술본부 탄소중립대응센터) ,  전미진 (한국산업기술시험원 환경기술본부 탄소중립대응센터) ,  정상철 (한국산업기술시험원 환경기술본부 탄소중립대응센터) ,  전용우 (한국산업기술시험원 환경기술본부 탄소중립대응센터)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 중공사형 지지체막을 폴리술폰(polysulfone, PSf) 고분자를 이용하여 비용매 상분리법(non solvent induced phase separation, NIPS)에 의해 제조하였다. 제조된 중공사 지지체막을 PDMS와 Pebax를 코팅하여 중공사형 복합막을 제조하고 CO2, H2, O2 그리고 N2에 대한 순수 투과도(permeance)와 선택도를 측정하였다. 제조된 복합막 모듈 중에서 선택도(CO2/H2)가 가장 높은 모듈을 선정하여 모사가스를 사용하여 스테이지컷(stage cut, SC)의 변화에 따라 분리성능을 측정하였다. 이때 사용된 모사가스는 PSA에서 버려지는 off gas의 농도인 CO2 70% : H2 30%인 것을 사용하였다. 1단 실험에서는 H2 농도 약 60%, H2 회수율 12%의 값을 얻을 수 있었다. 낮은 H2 농도와 회수율을 극복하기 위해 2단 직렬 테스트를 수행하였으며, 이를 통해 H2 농도 약 70%, H2 회수율 70%를 달성할 수 있었으며, 이를 통해 CO2/H2 분리에 대하여 분리 공정 구성을 도출할 수 있었다.

Abstract AI-Helper 아이콘AI-Helper

In this study, a hollow fiber support membrane was prepared by a non-solvent induced phase separation (NIPS) method using a polysulfone (PSf). The prepared hollow fiber support membrane was coated with PDMS and Pebax to prepare a hollow fiber composite membrane. The prepared composite membrane was m...

주제어

참고문헌 (33)

  1. A. A. Bazmi and G. Zahedi, "Sustainable energy systems: role of optimization modeling techniques in power generation and supply-A review", Renew. Sust. Energy Rev., 15, 3480-3500 (2011). 

  2. N. L. Panwar, S. C. Kaushik, and S. Kothari, "Role of renewable energy sources in environmental protection: A review", Renew. Sust. Energy Rev., 15, 1513-1524 (2011). 

  3. P. Moriarty and D. Honnery, "What is the global potential for renewable energy?" Renew. Sust. Energy Rev., 16, 244-252 (2012). 

  4. L. Shao, B. T. Low, T. S. Chuang, and A. R. Greenberg, "Polymeric membranes for the hydrogen economy: contemporary approaches and prospects for the future", J. Membr. Sci., 327, 18-31 (2009). 

  5. B. Barnali, C. Narayan, and N. Swati, "Production of hydrogen by steam reforming of methane over alumina supported nano-NiO/SiO 2 catalyst", Cat. Today 207, 28-35 (2013). 

  6. A. Boyano, A. M. Marigorta, T. Morosuk, and G. Tsatsaronis, "Exergoenvironmental analysis of a steam methane reforming process for hydrogen production", Energy, 36, 2202-2214 (2011). 

  7. H. W. Kwon, K. S. Im, J. H. Kim, S. H. Kim, D. H. Kim, and S. Y. Nam, "Preparation and gas permeation characteristics of polyetherimide hollow fiber membrane for the application of hydrogen separation", Membr. J., 31, 456 (2021). 

  8. S. Sircar and T. C. Golden, "Purification of hydrogen by pressure swing adsorption", Sep. Sci. Technol., 35, 667 (2000). 

  9. W. Liemberger, M. Gross, M. Miltner, and M. Harasek, "Experimental analysis of membrane and pressure swing adsorption (PSA) for the hydrogen separation from natural gas", J. Clean. Prod., 167, 896 (2017). 

  10. N. Peng, N. Widjojo, P. Sukitpaneenit, M. M. Teoh, G. G. Lipscomb, and T. S. Chung, "Evolution of polymeric hollow fibers as sustainable technologies: Past, present, and future", Prog. Polym. Sci., 37, 1401-1424 (2012). 

  11. D. F. Sanders, Z. P. Smith, R. Guo, L. M. Robeson, J. E. McGrath, and D. R. Paul, "Energy-efficient polymeric gas separation membranes for a sustainable future: A review", Polymer, 54, 4729-4761 (2013). 

  12. B. D. Freeman, "Basis of permeability/selectivity tradeoff relations in polymeric gas separation membranes", Macromolecules, 32, 375 (1999). 

  13. A. J. Erb and D. R. Paul, "Gas sorption and transport in polysulfone", J. Membr. Sci., 8, 11 (1981). 

  14. C. Y. Pan, "Gas separation by high-flux, asymmetric hollow fiber membranes", AIChE, 32, 2020 (1986). 

  15. Y. C. Xiao, B. T. Low, S. S. Hosseini, T. S. Chung, and D. R. Paul, "The strategies of molecular architecture and modification of polyimide-based membranes for CO 2 removal from natural gas-A review", Prog. Polym. Sci., 34, 561 (2009). 

  16. R. W. Baker, "Future directions of membrane gas separation technology", Ind. Eng. Chem. Res., 41, 1393 (2002). 

  17. Y. C. Xiao and T. S. Chung, "Grafting thermally labile molecules on cross-linkable polyimide to design membrane materials for natural gas purification and CO 2 capture", Energy Environ. Sci., 4, 201 (2011). 

  18. W. Qiu, L. Xu, C. C. Chen, D. R. Paul, and W. J. Koros, "Gas separation performance of 6 FDA-based polyimides with different chemical structures", Polymer, 54, 6226 (2013). 

  19. S. R. Reijerkerk, R. Kprdama, K. Nijmeijer, and M. Wessling, "Highly hydrophilic, rubbery membranes for CO 2 capture and dehydration", Int. J. Greenh. Gas. Con., 5, 26 (2011). 

  20. J. Xia, S. Liu, and T. S. Chung, "Effect of end groups and grafting on the CO 2 separation performance of poly(ethylene glycol) based membranes", Macromolecules, 44, 7727 (2011). 

  21. S. J. Kim, C. S. Lee, H. C. Koh, S. Y. Ha, S. Y. Nam, J. W. Rhim, and W. M. Choi, "Solvent resistance and gas permeation property of PEI-PDMS hollow fiber composite membrane for separation and recovery of VOCs", Membr. J., 22, 1 (2012). 

  22. F. Wu, L. Li, Z. Xu, S. Tan, and Z. Zhang, "Transport study of pure and mixed gases through PDMS membrane", Chem. Eng. J., 117, 51 (2006). 

  23. T. C. Merkel, V. I. Bondar, K. Nagai, B. D. Freeman, and I. Pinnau, "Gas sorption, diffusion, and permeation in poly(dimethylsiloxane)", J. Polym. Sci. Polym. Phys., 38, 415 (2000). 

  24. H. Lin, E. V. Wagner, B. D. Freeman, L. G. Toy, and G. P. Gupta, "Plasticization-enhanced hydrogen purification using polymeric membranes", Science, 311, 639 (2006). 

  25. H. Lin and B. D. Freeman, "Gas solubility, diffusivity and permeability in poly(ethylene oxide)", J. Membr. Sci., 239, 105 (2004). 

  26. A. Car, C. Stropnik, W. Yave, and K. V. Peinemann, "PEG modified poly(amide-b-ethylene oxide) membranes for CO 2 separation", J. Membr. Sci., 307, 88 (2008). 

  27. T. K. Carlisle, G. D. Nicodemus, D. L. Gin, and R. D. Noble, "CO 2 /light gas separation performance of cross-linked poly(vinylimidazolium) gel membrane as a function of ionic liquid loading and cross-linker content", J. Membr. Sci., 397, 24 (2012). 

  28. R. D. Noble and D. L. Gin, "Perspective on ionic liquids and ionic liquid membranes", J. Membr. Sci., 369, 1 (2011). 

  29. H. Lin and B. D. Freeman, "Material selection guidelines for membranes that remove CO 2 from gas mixtures", J. Mol. Struct., 739, 57 (2005). 

  30. S. L. Liu, L Shao, M. L. Chua, C. H. Lau, H. Wang, and S. Quan, "Recent progress in the design of advanced PEO-containing membranes for CO 2 removal", Prog. Polym. Sci., 38, 1089 (2013). 

  31. S. R. Reijerkerk, M. H. Knoef, K. Nijmeijer, and M. Wessling, "Poly(ethylene glycol) and poly(dimethyl siloxane): Combining their advantages into efficient CO 2 gas separation membranes", J. Membr. Sci., 352, 126 (2010). 

  32. W. Yave, A. Car, and K. V. Peinemann, "Nanostructured membrane material designed for carbon dioxide separation", J. Membr. Sci., 350, 124 (2010). 

  33. H. B. Park, J. kamcev, L. M. Robeson, M. Elimelech, and B. D. Freeman, "Maximizing the right stuff : The trade-off between membrane permeability and selectivity", Science, 356, 1137 (2017). 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로