최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society of Precision Engineering, v.37 no.5, 2020년, pp.381 - 388
Hwang, SoRee , Lee, JongWon , Lee, SoHyang , Hong, DaeGi , Park, MinSoo
초록이 없습니다.
Joyee, Erina Baynojir, Lu, Lu, Pan, Yayue. Analysis of mechanical behavior of 3D printed heterogeneous particle-polymer composites. Composites. Part B, Engineering, vol.173, 106840-.
Mao, Dasha, Chen, Jiahui, Ren, Linlin, Zhang, Kai, Yuen, Matthew M.F., Zeng, Xiaoliang, Sun, Rong, Xu, Jian-Bin, Wong, Ching-Ping. Spherical core-shell Al@Al2O3 filled epoxy resin composites as high-performance thermal interface materials. Composites. Part A, Applied science and manufacturing, vol.123, 260-269.
Scordo, Giorgio, Bertana, Valentina, Scaltrito, Luciano, Ferrero, Sergio, Cocuzza, Matteo, Marasso, Simone L., Romano, Stefano, Sesana, Raffaella, Catania, Felice, Pirri, Candido F.. A novel highly electrically conductive composite resin for stereolithography. Materials today communications, vol.19, 12-17.
Zhang, Keqiang, Xie, Chen, Wang, Gang, He, Rujie, Ding, Guojiao, Wang, Min, Dai, Dawei, Fang, Daining. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing. Ceramics international, vol.45, no.1, 203-208.
Chen, Zhangwei, Li, Junjie, Liu, Chengbo, Liu, Yu, Zhu, Junyi, Lao, Changshi. Preparation of high solid loading and low viscosity ceramic slurries for photopolymerization-based 3D printing. Ceramics international, vol.45, no.9, 11549-11557.
Wang, Jia-Chang, Dommati, Hitesh. Fabrication of zirconia ceramic parts by using solvent-based slurry stereolithography and sintering. International journal of advanced manufacturing technology, vol.98, no.5, 1537-1546.
Choi, Jae-Won, Kim, Ho-Chan, Wicker, Ryan. Multi-material stereolithography. Journal of materials processing technology, vol.211, no.3, 318-328.
Wicker, Ryan B., MacDonald, Eric W.. Multi-material, multi-technology stereolithography : This feature article covers a decade of research into tackling one of the major challenges of the stereolithography technique, which is including multiple materials in one construct. Virtual and physical prototyping, vol.7, no.3, 181-194.
He, Yong, Qiu, Jingjiang, Fu, Jianzhong, Zhang, Jiong, Ren, Yina, Liu, An. Printing 3D microfluidic chips with a 3D sugar printer. Microfluidics and Nanofluidics, vol.19, no.2, 447-456.
Hong, Seongik, Sanchez, Cesar, Du, Hanuel, Kim, Namsoo. Fabrication of 3D Printed Metal Structures by Use of High-Viscosity Cu Paste and a Screw Extruder. Journal of electronic materials, vol.44, no.3, 836-841.
Raney, Jordan R., Compton, Brett G., Mueller, Jochen, Ober, Thomas J., Shea, Kristina, Lewis, Jennifer A.. Rotational 3D printing of damage-tolerant composites with programmable mechanics. Proceedings of the National Academy of Sciences of the United States of America, vol.115, no.6, 1198-1203.
Weikert, S., Ratnaweera, R., Zirn, O., and Wegener, K., “Modeling and Measurement of H-BOT Kinematic Systems,” Proc. of the American Society for Precision Engineering, Vol. 52, pp. 274-277, 2011.
Spath, Sebastian, Seitz, Hermann. Influence of grain size and grain-size distribution on workability of granules with 3D printing. International journal of advanced manufacturing technology, vol.70, no.1, 135-144.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.