최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials science & engineering. properties, microstructure and processing. A, Structural materials, v.803, 2021년, pp.140695 -
Roodgari, Mohammad Reza (Corresponding author.) , Jamaati, Roohollah , Jamshidi Aval, Hamed
Abstract In the current research, a new dual-phase (DP) steel produced by a novel technique consists of a combination of friction stir welding (FSW) and austenitization treatment using two different low carbon steels (interstitial free (IF) and St52). The microstructures of the IF layers in the DP ...
Science and Engineering A Das 754 348 2019 10.1016/j.msea.2019.03.084 Influence of microstructure and strain rate on the strain partitioning behaviour of dual phase steels Materials
Mater. Char. Tsai 123 153 2017 10.1016/j.matchar.2016.11.023 Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel
Mater. Sci. Eng. Fillafer 708 556 2017 10.1016/j.msea.2017.10.005 On phase transformation induced effects controlling the initial flow behavior of ferritic-martensitic dual-phase steels
Metall. Mater. Trans. Farias 49 6010 2018 10.1007/s11661-018-4954-z Characterization of a continuously cooled dual-phase steel microstructure
Mater. Des. Meng 58 194 2014 10.1016/j.matdes.2014.01.055 High-efficiency fast-heating annealing of a cold-rolled dual-phase steel
J. Alloys Compd. Ko 504 S452 2010 10.1016/j.jallcom.2010.02.109 Strain hardening behavior of nanostructured dual-phase steel processed by severe plastic deformation
Acta Mater. Kadkhodapour 59 4387 2011 10.1016/j.actamat.2011.03.062 Experimental and numerical study on geometrically necessary dislocations and non-homogeneous mechanical properties of the ferrite phase in dual phase steels
Mater. Sci. Eng. Balbi 733 1 2018 10.1016/j.msea.2018.07.029 Effect of holding time at an intercritical temperature on the microstructure and tensile properties of a ferrite-martensite dual phase steel
Mater. Sci. Eng. Mazaheri 619 1 2014 10.1016/j.msea.2014.09.058 A novel route for development of ultrahigh strength dual phase steels
Mater. Sci. Eng. Zhang 618 168 2014 10.1016/j.msea.2014.08.073 Microstructure and mechanical properties of high strength and high toughness micro-laminated dual phase steels
Metall. Mater. Trans. Rosenberg 46 4755 2015 10.1007/s11661-015-3074-2 Development of cold-rolled dual-phase steels with tensile strength above 1000 MPa and good bendability
Vacuum Alibeyki 155 147 2018 10.1016/j.vacuum.2018.06.003 Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite
Mater. Sci. Eng. Wang 703 486 2017 10.1016/j.msea.2017.07.092 Microstructural evolution and mechanical properties of dual phase steel produced by strip casting
Mater. Sci. Eng. Anazadeh Sayed 532 21 2012 10.1016/j.msea.2011.10.056 Affect of the tempering temperature on the microstructure and mechanical properties of dual phase steels
Mater. Chem. Phys. Nikkhah 230 1 2019 10.1016/j.matchemphys.2019.03.053 Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing
Mater. Sci. Eng. Etesami 682 296 2017 10.1016/j.msea.2016.09.112 Austenite formation and mechanical properties of a cold rolled ferrite-martensite structure during intercritical annealing
Mater. Sci. Eng. Zamani 734 178 2018 10.1016/j.msea.2018.07.105 Enhancement of mechanical properties of low carbon dual phase steel via natural aging
J. Alloys Compd. Sun 698 390 2017 10.1016/j.jallcom.2016.12.224 A lamellar structured ultrafine grain ferrite-martensite dual-phase steel and its resistance to hydrogen embrittlement
Mater. Sci. Eng. Zhang 618 168 2014 10.1016/j.msea.2014.08.073 Microstructure and mechanical properties of high strength and high toughness micro-laminated dual phase steels
Mater. Sci. Eng. Sun 734 311 2018 10.1016/j.msea.2018.08.009 Ultrafine grained dual-phase martensite/ferrite steel strengthened and toughened by lamella structure
Mater. Chem. Phys. Saeidi 192 1 2017 10.1016/j.matchemphys.2017.01.052 Development of a new dual phase steel with laminated microstructural morphology
JOM Jamaati 68 271 2016 10.1007/s11837-015-1688-x Effect of particles on continuous and discontinuous recrystallization of nanostructured interstitial free steel
Mater. Sci. Eng. Jamaati A639 604 2015 10.1016/j.msea.2015.05.081 Annealing texture of nanostructured steel-based composite
Mater. Sci. Eng. Jamaati 639 298 2015 10.1016/j.msea.2015.05.025 Microstructural evolution of nanostructured steel-based composite fabricated by accumulative roll bonding
Metall. Mater. Trans. Jamaati 46 4013 2015 10.1007/s11661-015-3001-6 On the achievement of nanostructured interstitial free steel by four-layer accumulative roll bonding process at room temperature
Mater. Sci. Eng. Jamaati 638 143 2015 10.1016/j.msea.2015.04.014 Production of nanograin microstructure in steel nanocomposite
Mater. Sci. Eng. Mirzadeh 528 3876 2011 10.1016/j.msea.2011.01.098 Hot deformation behavior of a medium carbon microalloyed steel
Mater. Sci. Eng. Mahmoudiniya 737 213 2018 10.1016/j.msea.2018.09.013 Microstructure and mechanical properties of friction stir welded ferrite-martensite DP700 steel
Mater. Sci. Eng. Qin 586 62 2013 10.1016/j.msea.2013.07.091 Mechanical behaviour of dual-phase high-strength steel under high strain rate tensile loading
Mater. Sci. Eng. Karimi 736 392 2018 10.1016/j.msea.2018.09.008 Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures
Mater. Sci. Eng. Jamei 750 125 2019 10.1016/j.msea.2019.02.052 Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.