최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composite structures, v.53 no.4, 2001년, pp.427 - 435
Meyer-Piening, H.-R (ETH Zü) , Farshad, M (rich, Institut fü) , Geier, B (r Mechanische Systeme, Leonhardstrasse 25, CH-8092 Zü) , Zimmermann, R (rich, Switzerland)
AbstractDuring the years 1994 through 1999, a European research project under the title “Design and Validation of Imperfection-Tolerant Laminated Shells” (DEVILS) was carried out. In this project, 11 European partners were involved. A goal of the project was an analytical and experimen...
Geier B, Klein H, Zimmermann R. Buckling tests with axially compressed unstiffened cylindrical shells made from CFRP. In: Jullien JF, editor. Proceedings of the International Colloqium on Buckling of Shell Structures, on Land, in the Sea and in the Air, Lyon, France; September 1991. Amsterdam: Elsevier; 1991 (ISBN 1-85166-716-4). p. 498-507
Aerospace Sci. Technol. Geier 1 47 1997 10.1016/S1270-9638(97)90023-7 Some simple solutions for buckling loads of thin and moderately thick cylindrical shells and panels made of laminated composite material
Geier B, Rohwer K. Buckling and post-buckling of anisotropic shells. In: Proceedings of the ECCS Colloquium on Stability of Plates and Shell Structures, Ghent University; 6-8 April 1987
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.