최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Applied thermal engineering, v.29 no.14/15, 2009년, pp.2816 - 2823
Vins, V. (Czech Technical University in Prague, Faculty of Mechanical Engineering, Technicka 4, 16607 Prague 6, Czech Republic) , Vacek, V.
This paper presents some experimental results of refrigerant two-phase flow through a capillary tube. The data was obtained for fluorinert refrigerant R218, which is used in some special vapor cooling circuits, e.g. in various particle detectors at the CERN international research centre. An analytic...
Journal of Instrumentation Olcese 3 2008 The evaporative cooling system for the ATLAS inner detector
Nuclear Instruments and Methods in Physics Research A Oriunno 581 499 2007 10.1016/j.nima.2007.08.034 Design and prototype studies of the TOTEM Roman pot detectors
Journal of Instrumentation Deile 3 2008 The TOTEM experiment and the CERN large hadron collider
Applied Thermal Engineering Bansal 18 207 1998 10.1016/S1359-4311(97)00016-1 An homogeneous model for adiabatic capillary tubes
Applied Thermal Engineering Sami 18 491 1998 10.1016/S1359-4311(97)00048-3 Numerical prediction of capillary tube behaviour with pure and binary alternative refrigerants
Energy Conversion and Management Fatouh 48 1338 2007 10.1016/j.enconman.2006.07.003 Theoretical investigation of adiabatic capillary tubes working with propane/n-butane/iso-butane blends
Applied Thermal Engineering Seixlack 29 523 2009 10.1016/j.applthermaleng.2008.03.012 Numerical analysis of refrigerant flow along non-adiabatic capillary tubes using a two-fluid model
Applied Thermal Engineering Guobing 26 1106 2006 10.1016/j.applthermaleng.2005.11.003 Numerical and experimental investigations on the performance of coiled adiabatic capillary tubes
International Journal of Energy Research Wongwises 27 93 2003 10.1002/er.860 A simulation for predicting the refrigerant flow characteristics including metastable region in adiabatic capillary tube
Applied Thermal Engineering García-Valladares 22 173 2002 10.1016/S1359-4311(01)00074-6 Numerical simulation of capillary tube expansion devices behavior with pure and mixed refrigerants considering meta-stable region
International Journal of Refrigeration García-Valladares 30 642 2007 10.1016/j.ijrefrig.2006.08.015 Numerical simulation of non-adiabatic capillary tubes considering metastable region. Part I: mathematical formulation and numerical model
International Journal of Refrigeration García-Valladares 30 654 2007 10.1016/j.ijrefrig.2006.10.003 Numerical simulation of non-adiabatic capillary tubes considering metastable region. Part II: experimental validation
Applied Thermal Engineering García-Valladares 27 1062 2007 10.1016/j.applthermaleng.2006.07.034 Numerical simulation and experimental validation of coiled adiabatic capillary tubes
ASHRAE Journal Mikol 75 1963 Adiabatic single and two phase flow in small bore tubes
ASHRAE Transactions Koizumi 86 19 1980 Characteristics of refrigerant flow in a capillary tube
International Journal of Refrigeration Li 13 181 1990 10.1016/0140-7007(90)90073-6 Metastable flow of R12 through capillary tubes
S. Chang, S. Ro, Experimental and numerical studies on adiabatic flow of HFC mixtures in capillary tubes, in: Proceedings of the International Refrigeration Conference at Purdue 1996, Purdue University, USA, 1996, pp. 83-88.
Experimental Thermal and Fluid Science Huerta 31 957 2007 10.1016/j.expthermflusci.2006.10.002 Metastable flow in capillary tubes: an experimental evaluation
ASHRAE Transactions Li 96 542 1990 Numerical modeling of thermodynamic non-equilibrium flow of refrigerant through capillary tubes
International Journal of Refrigeration Chen 24 261 2001 10.1016/S0140-7007(00)00019-0 Underpressure of vaporization of refrigerant R-134a through a diabatic capillary tube
Applied Thermal Engineering Melo 19 669 1999 10.1016/S1359-4311(98)00062-3 An experimental analysis of adiabatic capillary tubes
International Journal of Refrigeration Kim 25 521 2002 10.1016/S0140-7007(01)00039-1 Experimental investigation of the performance of R22 R407C and R410A in several capillary tubes for air-conditioners
International Journal of Refrigeration Choi 26 881 2003 10.1016/S0140-7007(03)00079-3 A generalized correlation for refrigerant mass flow rate through adiabatic capillary tubes
Applied Thermal Engineering Choi 24 29 2004 10.1016/S1359-4311(03)00238-2 An empirical correlation and rating charts for the performance of adiabatic capillary tubes with alternative refrigerants
Applied Thermal Engineering Jabaraj 26 1621 2006 10.1016/j.applthermaleng.2005.11.017 Flow characteristics of HFC407C/HC600a/HC290 refrigerant mixture in adiabatic capillary tubes
Physical Review Buckingham 4 345 1914 10.1103/PhysRev.4.345 On physically similar systems; illustrations of the use of dimensional equations
International Journal of Refrigeration Zhang 28 506 2005 10.1016/j.ijrefrig.2004.11.004 Generalized correlation of refrigerant mass flow rate through adiabatic capillary tubes using artificial neural network
International Journal of Refrigeration Zhang 30 690 2007 10.1016/j.ijrefrig.2006.10.005 Model-based neural network correlation for refrigerant mass flow rates through adiabatic capillary tubes
Energy Conversion and Management Islamoglu 46 223 2005 10.1016/j.enconman.2004.02.015 Performance prediction for non-adiabatic capillary tube suction line heat exchanger: an artificial neural network approach
10.1016/j.applthermaleng.2008.08.020 R. Kumar, M.K. Khan, P.K. Sahoo, Flow characteristics of refrigerants flowing through capillary tubes - a review, Applied Thermal Engineering (in press), doi:10.1016/j.applthermaleng.2008.08.020.
B. Hallgren, H. Boterenbrood, H.J. Burckhart, H. Kvedalen, The Embedded Local Monitor Board (ELMB) in the LHC front-end I/O control system, in: Proceedings of the Seventh Workshop on Electronics for LHC Experiments, vol. 5, CERN Reports, 2001, pp. 325-330.
T.P. Brackbill, P.L. Young, S.G. Kandlikar, Estimating roughness parameters resulting from various machining techniques for fluid flow applications, in: Proceedings of Fifth International Conference on Nanochannels, Microchannels and Minichannels, June 18-20, Puebla, Mexico, 2007, pp. 827-836.
International Journal of Thermophysics Vacek 28 1490 2007 10.1007/s10765-007-0294-8 A study of the flow through a capillary tube tuned up for the cooling circuit with fluoroinert refrigerants
REFPROP version 7.0, Reference fluid thermodynamics and transport properties, NIST Standard Reference Database 23, Gaithersburg, MD 20899, USA, 2002.
Fluid Phase Equilibria Vacek 185 305 2001 10.1016/S0378-3812(01)00479-4 Velocity of sound measurements in gaseous per-fluorocarbons and their mixtures
Fluid Phase Equilibria Vacek 174 191 2000 10.1016/S0378-3812(00)00426-X Perfluorocarbons and their use in cooling systems for semiconductor particle detectors
MATLAB the Language of Technical Computing, v. 6.5.0, The MathWorks Inc., 2002.
Computers and Chemical Engineering Ponton 17 991 1993 10.1016/0098-1354(93)80080-7 Alternatives to neural networks for inferential measurement
ASHRAE Handbook: Refrigeration/SI edition, ASHRAE, 1998, ISBN: 1883413540 (Chapter 45).
ASHRAE Transactions Kuehl 97 139 1991 Modeling of steady flows of R22 through capillary tubes
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.