최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Ceramics international, v.37 no.8, 2011년, pp.3445 - 3450
Nampi, P.P. (Advanced Sintering Technology Group, Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), 2266-98 Anagahora, Shimoshidami, Moriyama-ku, Nagoya 463-8560, Japan) , Kume, S. , Hotta, Y. , Watari, K. , Itoh, M. , Toda, H. , Matsutani, A.
The production of ceramic components using fewer processing steps on a shorter timescale is very important when considering the industrial and economic aspects of the manufacture of these materials in bulk. Spray-dried granules are expected to give compacts with fewer defects due to their l...
Thummler 1993 Introduction to Powder Metallurgy
Masters 1985 Spray Drying Handbook
Trans. Inst. Chem. Eng. Walton 77 21 1999 10.1205/026387699525846 Spray dried products-characterization of particle morphology
J. Am. Ceram. Soc. Lukasiewiez 72 617 1989 10.1111/j.1151-2916.1989.tb06184.x Spray drying ceramic powders
Chem. Eng. Prog. Crosby 54 56 1958 Effects of drying conditions in the properties of spray dried particles
Chem. Eng. Sci. Bertrand 60 95 2005 10.1016/j.ces.2004.04.042 Spray-dried ceramic powders: a quantitative correlation between slurry characteristics and shapes of granules
Chem. Eng. Sci. Tsubaki 56 3021 2001 10.1016/S0009-2509(00)00485-1 The effects of the concentration of a polymer dispersant on apparent viscosity and sedimentation behaviour of dense slurries
J. Am. Ceram. Soc. Song 77 806 1994 10.1111/j.1151-2916.1994.tb05369.x A die pressing test for the estimation of agglomerate strength
J. Am. Ceram. Soc. Baklouti 80 1992 1997 10.1111/j.1151-2916.1997.tb03082.x Mechanical Properties of dry pressed ceramic green products:the effect of the binder
J. Eur. Ceram. Soc. Bertrand 23 263 2003 10.1016/S0955-2219(02)00171-1 Influence of slurry characteristics on the morphology of spray-dried alumina powders
J. Am. Ceram. Soc. Tanaka 89 1903 2006 10.1111/j.1551-2916.2006.01057.x Effect of organic binder segregation on sintered strength of dry-pressed alumina
Polym. Int. Filiatre 52 586 2003 10.1002/pi.1006 Alumina slurry formulation intender for spray-dried powder production
J. Eur. Ceram. Soc. Pagnoux 18 241 1998 10.1016/S0955-2219(97)00115-5 Aqueous suspensions for tape casting based on acrylic binders
J. Eur. Ceram. Soc. Greenwood 17 1393 1997 10.1016/S0955-2219(97)00034-4 Preparation of concentrated aqueous alumina suspension for tape casting
J. Eur. Ceram. Soc. Kristoffersson 18 2123 1998 10.1016/S0955-2219(98)00165-4 Comparison of different binders of water based tape casting of alumina
J. Eur. Ceram. Soc. Kristoffersson 18 2133 1998 10.1016/S0955-2219(98)00163-0 Study of interactions between polyelectrolyte dispersants, alumina and latex binders by rheological characterization
J. Eur. Ceram. Soc. Athena 21 493 2001 10.1016/S0955-2219(00)00232-6 Optimization of the rheological properties of alumina slurries for ceramic processing applications Part II: spray-drying
J. Am. Ceram. Soc. Dhara 88 547 2005 10.1111/j.1551-2916.2005.00122.x Influence of nature and amount of dispersant on rheology of aged aqueous alumina gel casting slurries
Lee 41 1995 Ceramic Transactions, vol. 54, Science, Technology and Applications of Colloidal Suspensions Effects of suspension property on granulate morphology and compaction behaviour
J. Am. Ceram. Soc. Takahasi 78 903 1997 10.1111/j.1151-2916.1995.tb08412.x Influence of slurry flocculation on the character and compaction of spray-dried silicon nitride granules
J. Eur. Ceram. Soc. Naito 17 251 1997 10.1016/S0955-2219(96)00144-6 Optimization of suspension characteristics for shaping processes
J. Am. Ceram. Soc. Walker 82 1711 1999 10.1111/j.1151-2916.1999.tb01990.x Influence of slurry parameters on the characteristics of spray dried granules
J. Am. Ceram. Soc. Balasubramanian 85 134 2002 10.1111/j.1151-2916.2002.tb00054.x Effect of internal lubricants on defects in compacts made from spray-dried powders
J. Am. Ceram. Soc. Uppalapati 88 1397 2005 10.1111/j.1551-2916.2005.00258.x Effect of external lubricant on mechanical properties of dry-pressed green bodies
J. Am. Ceram. Soc. Deis 81 1237 1998 10.1111/j.1151-2916.1998.tb02474.x X-ray computed tomography for evaluation of density gradient formation during the compaction of spray-dried granules
J. Am. Ceram. Soc. Kong 83 685 2000 10.1111/j.1151-2916.2000.tb01259.x Localized densification during the compaction of alumina granules: stage I-II transition
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.