다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of heat and mass transfer, v.77, 2014년, pp.247 - 256
Ameel, B. , Degroote, J. , Huisseune, H. , Vierendeels, J. , De Paepe, M.
AI-Helper
Heat exchangers for air conditioning applications are often of the fin and tube type. By choosing special fin geometries, the thermal performance of the heat exchanger can be enhanced. One of the recently proposed fin geometries for round tubes is the combination of louvers with a delta winglet vort...
Appl. Therm. Eng. Hsieh 42 101 2012 10.1016/j.applthermaleng.2012.03.003 Parametric study and optimization of louver finned-tube heat exchangers by Taguchi method
Wu 2011 Experiments: Planning, Analysis, and Optimization
Int. J. Heat Mass Transfer Yun 43 2529 2000 10.1016/S0017-9310(99)00342-7 Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
Chem. Eng. Res. Des. Fiebig 76 108 1998 10.1205/026387698524686 Vortices, generators and heat transfer
Int. J. Heat Mass Transfer Torii 45 3795 2002 10.1016/S0017-9310(02)00080-7 Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers
Int. J. Heat Mass Transfer He 55 5449 2012 10.1016/j.ijheatmasstransfer.2012.04.059 Numerical study of heat-transfer enhancement by punched winglet-type vortex generator arrays in fin-and-tube heat exchangers
Int. J. Heat Mass Transfer Lemouedda 53 5386 2010 10.1016/j.ijheatmasstransfer.2010.07.017 Optimization of the angle of attack of delta-winglet vortex generators in a plate-fin-and-tube heat exchanger
Int. J. Heat Mass Transfer Jang 67 432 2013 10.1016/j.ijheatmasstransfer.2013.08.028 Optimization of the span angle and location of vortex generators in a plate-fin and tube heat exchanger
Webb 1994 Principles of Enhanced Heat Transfer
Appl. Therm. Eng. Zeng 30 1775 2010 10.1016/j.applthermaleng.2010.04.009 Optimization of heat exchangers with vortex-generator fin by Taguchi method
Int. J. Heat Mass Transfer Yun 43 2529 2000 10.1016/S0017-9310(99)00342-7 Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins
Appl. Therm. Eng. Huisseune 51 490 2013 10.1016/j.applthermaleng.2012.09.044 Performance analysis of a compound heat exchanger by screening its design parameters
Int. J. Heat Mass Transfer Leu 44 4235 2001 10.1016/S0017-9310(01)00081-3 A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurations
Shah 2003 Fundamentals of Heat Exchanger Design
Int. J. Heat Mass Transfer Wang 42 1945 1999 10.1016/S0017-9310(98)00302-0 Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers
Annu. Rev. Fluid Mech. Roache 29 123 1997 10.1146/annurev.fluid.29.1.123 Quantification of uncertainty in computational fluid dynamics
Int. J. Heat Mass Transfer Huisseune 56 475 2013 10.1016/j.ijheatmasstransfer.2012.09.004 Performance enhancement of a louvered fin heat exchanger by using delta winglet vortex generators
Appl. Therm. Eng. Ameel 58 136 2013 10.1016/j.applthermaleng.2013.04.016 Optimization of X-shaped louvered fin and tube heat exchangers while maintaining the physical meaning of the performance evaluation criterion
J. Heat Transfer - Trans. ASME Cowell 112 288 1990 10.1115/1.2910374 A general method for the comparison of compact heat-transfer surfaces
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.