최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia engineering, v.96, 2014년, pp.510 - 516
Volech, Jiří (Corresponding author. Tel.: +420 22435 7452.) , Mráz, Ladislav , Šika, Zbyněk , Valášek, Michael
Abstract The paper deals with the simulation of a concept performing the deformation measurement of a serial robot. The simulation model consist of two parts. The one of them is the model of the flexible robot with the flexibility concentrated in its gearboxes and its beams. The other one is the mo...
Abele 2007 ADVOCUT, Abschlussbericht BMBF-Verbundprojekt, Adaptive vollserielle Werkzeugmaschine mit hochintegriertem mechatronischen Frasmodul zur HSCBearbeitung
Annals of the CIRP Abele 56/1 387 2007 10.1016/j.cirp.2007.05.090 Modeling and Identification of an Industrial Robot for Machining Applications
CIRP Annals - Manufacturing Technology Verl 55 1 407 2006 10.1016/S0007-8506(07)60446-6 Force Free Add-on Position Measurement Device for the TCP of Parallel Kinematic Manipulators
IEEE Trans. On Robotics and Automation Zhuang 13 3. 387 1997 10.1109/70.585901 Self-calibration of parallel mechanisms with a case study on Stewart platforms
Neumann 547 2002 Development Methods and Application Experience of Parallel Kinematics The 3rd Chemnitz Parallel Kinematics Seminar PKS 2002 Tricept Applications
Zengxi 4289 2009 ICROS-SICE International Joint Conference, Fukuoka Improving Robotic Machining Accuracy by Real-time Compensation
FME Transactions Slavkovic 41 83 2013 Cartesian Compliance Identification and Analysis of an Articulated Machining Robot
Sornmo 543 2012 10th IFAC Symposium on Robot Control-SYROCO 2012, Dubrovnik Increasing Time-Efficiency and Accuracy of Robotic Machining Processes Using Model-Based Adaptive Force Control
Communications in Computer and Information Science Lehmann 371 27 2013 10.1007/978-3-642-39223-8_3 Machining with industrial robots: the COMET project approach
Puzik 1 2010 41st International Symposium on and 2010 6th German Conference on Robotics (ROBOTIK) Robot Machining with additional 3-D-Piezo-Actuation-Mechanism for Error Compensation, Robotics (ISR) [2010]
Sornmo 104 2012 The 2012 IEEE/ASME International Conference onAdvanced Intelligent Mechatronics, Kaohsiung Increasing the Milling Accuracy for Industrial Robots Using a Piezo-Actuated High Dynamic Micro Manipulator
Multibody System Dynamics Vampola 18 3 413 2007 10.1007/s11044-007-9089-8 Composite Rigid Body Formalism for Flexible Multibody Systems
Zengxi 4289 2009 ICROS-SICE International Joint Conference, Fukuoka Improving Robotic Machining Accuracy by Real-time Compensation
Tso 3780 1997 IEEE International Conference on Systems, Man, and Cybernetics, 1997, Computational Cybernetics and Simulation, 4 Sensor-based deflection modeling and compensation control of a flexible robotic manipulator
SOPO 2009. Symposium on Zhen 14 2009 Modeling of Fine Tracking Sensor for Free Space Laser Communication Systems, Photonics and Optoelectronics, 2009
Cim and Robotics (Manufacturing Research and Technology) Cotsaftis: 1993 Advances in Factories of the Future
Pacific Silicon Sensor Quadrant Series Datasheet, http://www.pacificsensor.com.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.