[논문]Improving Product Quality by Implementing ISO / TS 16949

Pop, L.D.; Elod, N.

doi:10.1016/j.protcy.2015.02.143

Improving Product Quality by Implementing ISO / TS 16949 원문보기

Procedia Technology, v.19, 2015년, pp.1004 - 1011

Pop, L.D. , Elod, N.

Abstract ▼ AI-Helper

An organization operating in the auto industry who wishes to become a first hand supplier of major automotive manufacturers in the world should plan to get certified under the standard ISO/TS 16949 because it may be a contractual requirement imposed by most of the manufacturers. The purpose of this standard is developing a quality management system that will generate continuous improvement through prevention of defects, reduction of variation and waste minimization, on the entire supply chain of the automotive industry. Among the basic means used for certification the following should be mentioned: SPC (Statistical Process Control), MSA (Measurement System Analysis), PFMEA (Potential Failure Modes and Effect Analysis), APQP (Advanced Product Quality Planning), PPAP (Production Part Approval Process). This paper describes the implementation and improvement of SPC in an ISO 9001:2008 certified organization in Romania, that planned the implementation of ISO/TS 16949 quality standard.

주제어

참고문헌 (19)

Rubber World Crosby 16 1998 A manager's guide to gauge R&R
Deaconescu A. Quality engineering. Laboratory guide. Ed. Transilvania University of Brasov, Romania 2003.
Forty Sixth CIRP Conference on Manufacturing Systems Gasper 401 2013 Statistical Process Control as a Service: An Industrial Case Study
Gramescu T, Chirila V. Product quality and reliability. Ed. Tehnica-Info, Chisinau 2001; p. 131-134.
Juran 1970 Quality Planning and Analysis From Product Development through Usage
Quality Engineering Kifor 189 2002
Procedia Technology Moica 12 489 2014 10.1016/j.protcy.2013.12.519 Statistical controls have a significant influence on Non Quality Costs. Cases study in a company those manufacturing aluminium castings componenets

상세보기
Montgomery 2009 Introduction to Statistical Quality Control
Nae I, Petrescu M. The control and assurance quality. Ed. University of Ploiesti, Romania 2004; p. 132-189.
Procedia Technology Pop 12 494 2014 10.1016/j.protcy.2013.12.520 Quality, competence and ISO certification in Romania

상세보기
Petrescu E, Voda V. A small unconventional dissertation of Quality Management. Ed. Asab, Bucuresti, Romania 2009; p. 114-119.
Pruteanu O, Bohosievici C, Gherghel N, Gramescu T. Management and quality control. Ed. Tehnica-Info, Chisinau 2000; p. 211-253.
Measurement Systems Analysis. Reference Manual. Fourth Edition. Chrysler Group LLC, Ford Motor Company, General Motors corporation. 2010.
ISO/TS 16949 standard.
***. http://www.infinityqs.com/industry/automotive.
***. http://www.aiag.org.
***. https://www.youtube.com/watch?v=Rjy9L-CNry0&list=PL3DC94DAEC15BCDA2.
***. http://www.lrqa.ro/standards-and-schemes/Standards/10178-isots16949.aspx.
***. http://www.qualitydigest.com/product-demo/products-software/infinityqs-proficient-demo.htm.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Improving Product Quality by Implementing ISO / TS 16949 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (19)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트