최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Energy and buildings, v.179, 2018년, pp.144 - 155
Taal, Arie (Department of Mechanical Engineering, The Hague University of Applied Sciences) , Itard, Laure (Faculty of Architecture and the Built Environment, Delft University of Technology) , Zeiler, Wim (Faculty of the Built Environment, Eindhoven University of Technology)
Abstract Automated energy performance diagnosis systems are seldom applied in practice, leading to excessive energy use and poor indoor environment. One reason for this is that HVAC and energy performance diagnosis systems are designed separately by different experts. Current frameworks for energy ...
Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures ISO/WD 52000-1, 2015. https://ec.europa.eu/energy/en/topics/energy-efficiency/buildings. [accessed 17.03.17].
Autom. Construct. de Wilde 41 40 2014 10.1016/j.autcon.2014.02.009 The gap between predicted and measured energy performance of buildings: a framework for investigation
Front. Mech. Eng. van Dronkelaar 1 17 2016 10.3389/fmech.2015.00017 A review of the regulatory energy performance gap and its underlying causes in non-domestic buildings
Calif. Energy Comm. Mills 2009 A golden opportunity for reducing energy costs and greenhouse gas emissions
Energy Build. Jing 144 117 2017 10.1016/j.enbuild.2017.03.042 A study on energy performance of 30 commercial office buildings in Hong Kong
Renew. Sustain. Energy Rev. Djuric 13 486 2009 10.1016/j.rser.2007.11.007 Review of possibilities and necessities for building lifetime commissioning
Renew. Sustain. Energy Rev. Verhelst 76 673 2017 10.1016/j.rser.2017.01.119 Model selection for continuous commissioning of HVAC-systems in office buildings: a review
Energy Procedia Kallab 122 895 2017 10.1016/j.egypro.2017.07.399 HIT2GAP: towards a better building energy management
Build. Environ. Wu 46 1558 2011 10.1016/j.buildenv.2011.01.017 Cross-level fault detection and diagnostics of building HVAC systems
RP1026: Evaluation of Next-Generation Automated Fault Detection & Diagnosis (FDD) tools for Commercial Building Energy Efficiency, Part I: FDD Case Studies in Australia. 2018. Low Carbon Living, CRC.
Sci. Technol. Built Environ. Kim 24 1 3 2018 10.1080/23744731.2017.1318008 A review of fault detection and diagnostics methods for building systems
Am. Soc. Heat. Refrig. Air Cond. Eng. 2012 ASHRAE handbook, HVAC systems and equipment
2007 Air-Conditioning System Design Manual
IEA 2006 Computer aided evaluation of HVAC system performance
IEA ECBS Annex 40. Commissioning of Building HVAC Systems for Improving Energy Performance. http://www.buildup.eu/en/explore/links/iea-ecbcs-annex-40-commissioning-building-hvac-systems-improving-energy-performance [accessed 28.03.2018].
IEA ECBS Annex 47. Cost Effective Commissioning of Existing and Low Energy Buildings. http://www.iea-annex47.org [accessed 28.03.2018].
Energy Build. Yoshino 152 124 2017 10.1016/j.enbuild.2017.07.038 IEA EBC annex 53: total energy use in buildings-analysis and evaluation methods
Annex 58 Reliable Building Energy Performance Characterization Based on Full Scale Dynamic Measurements, IEA.
BuildingEQ. http://www.buildingeq.eu [accessed 19.03.2018].
Energy Build. Wang 55 873 2012 10.1016/j.enbuild.2012.08.037 Quantitative energy performance assessment methods for existing buildings
Appl. Energy Chung 88 1470 2011 10.1016/j.apenergy.2010.11.022 Review of building energy-use performance benchmarking methodologies
Appl. Energy Li 124 325 2014 10.1016/j.apenergy.2014.03.020 Methods for benchmarking building energy consumption against its past or intended performance: an review
Energy Build. Borgstein 128 734 2016 10.1016/j.enbuild.2016.07.018 Evaluating energy performance in non-domestic buildings: a review
Renew. Sustain. Energy Rev. Wei 82 1027 2018 10.1016/j.rser.2017.09.108 A review of data-driven approaches for prediction and classification of building energy consumption
HVAC&R Res. Katipamula 11 3 2005 10.1080/10789669.2005.10391123 Methods for fault detection, diagnostics, and prognostics for building systems - a review, Part I
HVAC&R Res. Katipamula 11 169 2005 10.1080/10789669.2005.10391133 Methods for fault detection, diagnostics, and prognostics for building systems - a review, Part II
Energy Build. Cho 80 169 2014 10.1016/j.enbuild.2014.04.046 Development of an energy evaluation methodology to make multiple predictions of HVAC&R system energy demand for office buildings
Build. Environ. Maile 56 241 2012 10.1016/j.buildenv.2012.03.012 A method to compare simulated and measured data to assess building energy performance
Appl. Energy Wang 169 14 2016 10.1016/j.apenergy.2016.01.054 Methodology of comprehensive building energy performance diagnosis for large commercial buildings at multiple levels
Choiniere 2008 Proceedings of the National Conference on Building Commissioning A BEMS assisted on-going commissioning tool
Energy Build. Belussi 55 715 2012 10.1016/j.enbuild.2012.09.003 Method for the prediction of malfunctions of buildings through real energy consumption analysis: Holistic and multidisciplinary approach of energy signature
Appl. Energy Costa 101 2013 10.1016/j.apenergy.2011.10.037 Building operation and energy performance: monitoring, analysis and optimization toolkit
Energy Build. Hitchin 112 101 2016 10.1016/j.enbuild.2015.11.059 Daily energy consumption signatures and control charts for air-conditioned buildings
Energy Build. Zhao 66 41 2013 10.1016/j.enbuild.2013.07.007 Development of an energy monitoring system for large public buildings
Energy Build. Bynum 55 607 2012 10.1016/j.enbuild.2012.08.038 Development and testing of an automated building commissioning analysis tool (ABCAT)
Appl. Thermal Eng. Xiao 29 712 2009 10.1016/j.applthermaleng.2008.03.046 An isolation enhanced PCA method with expert-based multivariate decoupling for sensor FDD in air-conditioning systems
Appl. Thermal Eng. Guo 115 744 2017 10.1016/j.applthermaleng.2017.01.008 Modularized PCA method combined with expert-based multivariate decoupling for FDD in VRF systems including indoor unit faults
Build. Environ. Du 73 1 2014 10.1016/j.buildenv.2013.11.021 Fault detection and diagnosis for buildings and HVAC systems using combined neural networks and subtractive clustering analysis
Appl. Energy Lee 77 153 2004 10.1016/S0306-2619(03)00107-7 Subsystem level fault diagnosis of a building's air-handling unit using general regression neural networks
10.1016/j.applthermaleng.2016.07.109 K. Sun, G. Li, H. Chen, J. Liu, J. Li, W. Hu, A novel efficient SVM-based fault diagnosis method for multi-split air conditioning system's refrigerant charge fault amount, Appl. Thermal Eng. 108, 2016, 989-998. doi:10.1016/j.applthermaleng.2016.07.109.
Appl. Thermal Eng. Han 31 582 2011 10.1016/j.applthermaleng.2010.10.021 Study on a hybrid SVM model for chiller FDD applications
Energy Lund 68 1 2014 10.1016/j.energy.2014.02.089 4th generation district heating (4GDH): integrating smart thermal grids into future sustainable energy systems
Renew. Sustain. Energy Rev. Tuballa 59 710 2016 10.1016/j.rser.2016.01.011 A review of the development of smart grid technologies
Renew. Energy Navarro 88 526 2016 10.1016/j.renene.2015.11.040 Thermal energy storage in building integrated thermal systems: a review. Part 1. active storage system
Renew. Sustain. Energy Rev. Fleuchaus 94 861 2018 10.1016/j.rser.2018.06.057 Worldwide application of aquifer thermal energy storage - a review
Renew. Sustain. Energy Rev. Kasalinis 25 483 2013 10.1016/j.rser.2013.04.016 Climate adaptive building shells: State-of-the-art and future challenges
ISSO-publicatie 44. Het ontwerp van hydraulische schakelingen voor verwarmen. ISSO. 1998. ISBN: 978-90-5044-064-6.
ISSO-publicatie 47. Ontwerp van hydraulische schakelingen voor koelen. ISSO. 2013. ISBN: 978-90-5044-112-4.
Energy Build. Djuric 42 510 2010 10.1016/j.enbuild.2009.10.020 Correlation between standards and the lifetime commission
prEN 15603:2013:E, Energy performance of Buildings - Overarching standard EPBD, CEN.
K.L. Gillespie, P. Haves, R.J. Hitchcock, J. Deringer, K.L. Kinney. A Specifications Guide for Performance Monitoring Systems. https://buildingdata.energy.gov/cbrd/resource/795. [accessed 29.03.2018].
Barley 2005
HVAC&R Res. Wang 5 4 353 1999 10.1080/10789669.1999.10391243 Law-based sensor fault diagnosis and validation for building air-conditioning systems
Lucas 73 2001 Proceedings of the EUNITE Workshop on Intelligent Systems in Patient Care Bayesian networks in medicine: a model-based approach to medical decision making
Stud. Health Technol. Inform. Zogarecki 192 461 2013 A system for automated general medical diagnosis using Bayesian networks
Autom. Construct. Xiao 41 106 2014 10.1016/j.autcon.2013.10.019 Bayesian network based FDD strategy for variable air volume terminals
Appl. Thermal Eng. Zhao 90 145 2015 10.1016/j.applthermaleng.2015.07.001 Diagnostic Bayesian networks for diagnosing air handling units faults - Part II: faults in coils and sensors
Eng. Appl. Artif. Intell. Verbert 59 260 2017 10.1016/j.engappai.2016.12.021 Combining knowledge and historical data for system-level fault diagnosis of HVAC systems
Energy Build. Hu 158 668 2018 10.1016/j.enbuild.2017.10.012 A machine learning Bayesian network for refrigerant charge faults of variable refrigerant flow air conditioning system
GeNie 2.1, BayesFusion. 2016. [accessed 21.04.16]. http://download.bayesfusion.com.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.