[논문]Tuning the Performance of Metallic Auxetic Metamaterials by Using Buckling and Plasticity

Ghaedizadeh, Arash; Shen, Jianhu; Ren, Xin; Xie, Yi Min

doi:10.3390/ma9010054

[해외논문] Tuning the Performance of Metallic Auxetic Metamaterials by Using Buckling and Plasticity 원문보기

Materials, v.9 no.1, 2016년, pp.54 -

Ghaedizadeh, Arash (Centre for Innovative Structures and Materials, School of Engineering, RMIT University, GPO Box 2476, Melbourne 3001, Australia) , Shen, Jianhu (s3393723@student.rmit.edu.au (A.G.)) , Ren, Xin (jianhu.shen@rmit.edu.au (J.S.)) , Xie, Yi Min (s3460277@student.rmit.edu.au (X.R.))

Abstract ▼ AI-Helper

Metallic auxetic metamaterials are of great potential to be used in many applications because of their superior mechanical performance to elastomer-based auxetic materials. Due to the limited knowledge on this new type of materials under large plastic deformation, the implementation of such materials in practical applications remains elusive. In contrast to the elastomer-based metamaterials, metallic ones possess new features as a result of the nonlinear deformation of their metallic microstructures under large deformation. The loss of auxetic behavior in metallic metamaterials led us to carry out a numerical and experimental study to investigate the mechanism of the observed phenomenon. A general approach was proposed to tune the performance of auxetic metallic metamaterials undergoing large plastic deformation using buckling behavior and the plasticity of base material. Both experiments and finite element simulations were used to verify the effectiveness of the developed approach. By employing this approach, a 2D auxetic metamaterial was derived from a regular square lattice. Then, by altering the initial geometry of microstructure with the desired buckling pattern, the metallic metamaterials exhibit auxetic behavior with tuneable mechanical properties. A systematic parametric study using the validated finite element models was conducted to reveal the novel features of metallic auxetic metamaterials undergoing large plastic deformation. The results of this study provide a useful guideline for the design of 2D metallic auxetic metamaterials for various applications.

주제어

참고문헌 (41)

1. Evans K.E. Alderson A. Auxetic materials: Functional materials and structures from lateral thinking! Adv. Mater. 2000 12 617 628 10.1002/(SICI)1521-4095(200005)12:9 3.0.CO;2-3

상세보기
2. Fozdar D.Y. Soman P. Lee J.W. Han L.-H. Chen S. Three dimensional polymer constructs exhibiting a tunable negative poisson’s ratio Adv. Mater. 2011 21 2712 2720 10.1002/adfm.201002022 21841943

상세보기
3. Lakes R. Foam structures with a negative Poisson’s ratio Science 1987 235 1038 1040 10.1126/science.235.4792.1038 17782252

상세보기
4. Evans K.E. Nkansah M.A. Hutchinson I.J. Rogers S.C. Molecular network design Nature 1991 353 124 10.1038/353124a0

상세보기
5. Friis E.A. Lakes R.S. Park J.B. Negative Poisson’s ratio polymeric and metallic foams J. Mater. Sci. 1988 23 4406 4414 10.1007/BF00551939

상세보기
6. Evans K.E. Caddock B.D. Microporous materials with negative Poisson’s ratios. I. Microstructure and mechanical properties J. Phys. D Appl. Phys. 1989 22 1877 1882 10.1088/0022-3727/22/12/013

상세보기
7. Evans K.E. Caddock B.D. Microporous materials with negative Poisson’s ratios. II. Mechanisms and interpretation J. Phys. D Appl. Phys. 1989 22 1883 1887 10.1088/0022-3727/22/12/013

상세보기
8. Yang W. Li Z.M. Shi W. Xie B.H. Yang M.B. Review on auxetic materials J. Mater. Sci. 2004 39 3269 3279 10.1023/B:JMSC.0000026928.93231.e0

상세보기
9. Critchley R. Corni I. Wharton J.A. Walsh F.C. Wood R.J.K. Stokes K.R. A review of the manufacture, mechanical properties and potential applications of auxetic foams Phys. Status Solidi B 2013 250 1963 1982 10.1002/pssb.201248550

상세보기
10. Shen J. Zhou S. Huang X. Xie Y.M. Simple cubic three-dimensional auxetic metamaterials Phys. Status Solidi B 2014 251 1515 1522 10.1002/pssb.201451304

상세보기
11. Bertoldi K. Reis P.M. Willshaw S. Mullin T. Negative Poisson’s ratio behaviour induced by an elastic instability Adv. Mater. 2010 22 361 366 10.1002/adma.200901956 20217719

상세보기
12. Mancusi G. Feo L. A refined finite element formulation for the microstructure-dependent analysis of two-dimensional (2D) lattice materials Materials 2013 6 1 17 10.3390/ma6010001

상세보기
13. Choi J.B. Lakes R.S. Design of a fastener based on negative Poisson’s ratio foam Cell. Polym. 1991 10 205 212
14. Scarpa F. Auxetic materials for bioprostheses IEEE Sig. Proc. Mag. 2008 25 128 126 10.1109/MSP.2008.926663

상세보기
15. Chen C.P. Lakes R.S. Micromechanical analysis of dynamic behavior of conventional and negative Poisson’s ratio foams J. Eng. Mater. Technol. 1996 118 285 288 10.1115/1.2806807

상세보기
16. Scarpa F. Ciffo L. Yates J. Dynamic properties of high structural integrity auxetic open cell foam Smart Mater. Struct. 2004 13 10.1088/0964-1726/13/1/006

상세보기
17. Alderson A. Rasburn J. Ameer-Beg S. Mullarkey P.G. Perrie W. Evans K.E. An auxetic filter: A tuneable filter displaying enhanced size selectivity or defouling properties Ind. Eng. Chem. Res. 2000 39 654 665 10.1021/ie990572w

상세보기
18. Sun Y. Pugno N. Hierarchical fibers with a negative Poisson’s Ratio for tougher composites Materials 2013 6 699 712 10.3390/ma6020699

상세보기
19. Gibson L.J. Ashby M.F. Schajer G.S. Robertson C.I. The mechanics of two-dimensional cellular materials Proc. R. Soc. Lond. A 1982 382 25 42 10.1098/rspa.1982.0087

상세보기
20. Theocaris P.S. Stavroulakis G.E. Panagiotopoulos P.D. Negative Poisson's ratios in composites with star-shaped inclusions: A numerical homogenization approach Arch. Appl. Mech. 1997 67 274 286 10.1007/s004190050117

상세보기
21. Smith C.W. Grima J.N. Evans K.E. A novel mechanism for generating auxetic behaviour in reticulated foams: Missing rib foam model Acta Mater. 2000 48 4349 4356 10.1016/S1359-6454(00)00269-X

상세보기
22. Gaspar N. Ren X.J. Smith C.W. Grima J.N. Evans K.E. Novel honeycombs with auxetic behaviour Acta Mater. 2005 53 2439 2445 10.1016/j.actamat.2005.02.006

상세보기
23. Babaee S. Shim J. Weaver J.C. Chen E.R. Pate N. Bertoldi K. Soft metamaterials with negative Poisson’s Ratio Adv. Mater. 2013 25 5044 5049 10.1002/adma.201301986 23878067

상세보기
24. Taylor M. Francesconi L. Gerendás M. Shanian A. Carson C. Bertoldi K. Low porosity metallic periodic structures with negative Poisson’s ratio Adv. Mater. 2014 26 2365 2370 10.1002/adma.201304464 24375708

상세보기
25. Dirrenberger J. Forest S. Jeulin D. Elastoplasticity of auxetic materials Comp. Mater. Sci. 2012 64 57 61 10.1016/j.commatsci.2012.03.036

상세보기
26. Gilat R. Aboudi J. Behavior of elastoplastic auxetic microstructural arrays Materials 2013 6 726 737 10.3390/ma6030726

상세보기
27. Bertoldi K. Boyce M.C. Deschanel S. Prange S.M. Mullin T. Mechanics of deformation-triggered pattern transformations and superelastic behavior in periodic elastomeric structures J. Mech. Phys. Solids 2008 56 2642 2668 10.1016/j.jmps.2008.03.006

상세보기
28. Mullin T. Willshaw S. Box F. Pattern switching in soft cellular solids under compression Soft Matter 2013 9 4951 4955 10.1039/c3sm27677e

상세보기
29. Ren X. Shen J. Ghaedizadeh A. Tian H. Xie Y.M. Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties Smart Mater. Struct. 2015 24 10.1088/0964-1726/24/9/095016

상세보기
30. Singamaneni S. Tsukruk V.V. Buckling instabilities in periodic composite polymeric materials Soft Matter 2010 6 5681 5692 10.1039/c0sm00374c

상세보기
31. Ho D.T. Park S.-D. Kwon S.-Y. Park K. Kim S.Y. Negative Poisson’s ratios in metal nanoplates Nat. Commun. 2014 5 10.1038/ncomms4255 24492746

상세보기
32. Jiang J.W. Park H.S. Negative Poisson’s ratio in single-layer black phosphorus Nat. Commun. 2014 5 10.1038/ncomms5727 25131569

상세보기
33. Mullin T. Deschanel S. Bertoldi K. Boyce M.C. Pattern transformation triggered by deformation Phys. Rev. Lett. 2007 9 10.1103/PhysRevLett.99.084301 17930950

상세보기
34. Wu G. Xia Y. Yang S. Buckling, symmetry breaking, and cavitation in periodically micro-structured hydrogel membranes Soft Matter 2014 10 1392 1399 10.1039/C3SM51640G 24651251

상세보기
35. Körner C. Liebold-Ribeiro Y. A systematic approach to identify cellular auxetic materials Smart Mater. Struct. 2015 24 10.1088/0964-1726/24/2/025013

상세보기
36. Shen J. Xie Y.M. Huang X.D. Zhou S.W. Ruan D. Mechanical properties of luffa sponge J. Mech. Behav. Biomed. Mater. 2012 15 141 152 10.1016/j.jmbbm.2012.07.004 23032434

상세보기
37. Hanssen A.G. Hopperstad O.S. Langseth M. Ilstad H. Validation of constitutive models applicable to aluminium foams Int. J. Mech. Sci. 2002 44 359 406 10.1016/S0020-7403(01)00091-1

상세보기
38. Avalle M. Belingardi G. Montanini R. Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram Int. J. Impact. Eng. 2001 25 455 472 10.1016/S0734-743X(00)00060-9

상세보기
39. Grima J.N. Alderson A. Evans K.E. Auxetic behaviour from rotating rigid units Phys. Status Solidi B 2005 242 561 575 10.1002/pssb.200460376

상세보기
40. Wu G. Cho Y. Choi I.-S. Ge D. Li J. Han H.N. Lubensky T. Yang S. Directing the deformation paths of soft metamaterials with prescribed a symmetric units Adv. Mater. 2015 27 2747 2752 10.1002/adma.201500716 25808041

상세보기
41. Ishibashi Y. Iwata M.A. Microscopic model of a negative poisson’s ratio in some crystals J. Phys. Soc. Jpn. 2000 69 2702 2703 10.1143/JPSJ.69.2702

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

[해외논문] Tuning the Performance of Metallic Auxetic Metamaterials by Using Buckling and Plasticity 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (41)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트