최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국안전학회지 = Journal of the Korean Society of Safety, v.28 no.6, 2013년, pp.64 - 72
전현우 (인천대학교 도시건축학부) , 정인수 (한국건설기술연구원) , 이찬식 (인천대학교 도시건축학부)
Construction machinery has been utilized to carry out construction works effectively. Using construction machinery enables a builder to reduce the time and the cost needed for the construction, but the fatal accident caused by it has been increased. This study is intended to identify risk magnitude ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
굴삭기란 무엇인가? | 국토교통부의 건설기계관리법 시행령은 굴삭기는 무한 궤도 또는 타이어식으로 굴삭장치를 가진 자체 중량 1톤 이상의 것을 일컫는다. | |
건설업에서 건설장비에 대한 안전관리가 중요한 이유는? | 36%)이 각종 건설장비로 인한 것으로 나타났다. 건설현장은 높은 곳에서 작업이 많이 이루어지고 각종 건설장비를 사용함으로써 수많은 재해발생요인이 잠재되어 있으며, 재해가 일단 발생하면 중대재해로 이어질 가능성이 커서 건설장비에 대한 철저한 안전관리는 매우 중요하다. | |
건설장비의 증가로 인해 나타난 장단점은? | 최근 건설 산업은 기술 및 공법의 눈부신 발달로 고층화 · 대형화 추세가 강하며, 효율적인 사업관리를 위해서 대형 건설장비를 이용한 작업이 증가하고 있다. 건설장비의 증가로 생산성 향상, 공기단축, 원가절감 등의 효과를 가져왔지만 근로자가 불안전한 상태에 노출은 심해지고 있으며, 사고사례도 많아지고 있다1). |
D. Y. Kim, "A Fundamental Study on Safety Management for High-rise Building Tower Crane Operators", Journal of Architectural Institute of Korea, Vol. 28, No. 2, pp.59-66, 2013.
H. Y. Kwak, "A Study on the Mobile Crane a Accident Case through the Analysis of Safety Measures", Department of Industrial and Management Engineering, Graduate School, Myongji University, 2013.
T. K. Kim, "A Study on the Risk Assessment of Lifting Equipments using in the High-rise Building Constriction Work", Department of Industrial and Management Engineering, Graduate School, Seoul National University of Science and Technology, 2013.
Y. S. Lee, Y. T. Gang, J. S. Kim and C. E. Kim, "The Study on the Accidents analysis and preventive Measures form a excavator", Journal of Korea Safety Management & Science, Vol. 12, No. 3, pp.81-91, 2010.
Y. K. Park, "A Study on the Analysis and Prevention of Industrial Accident for Forklift", Department of Industrial Engineering, Graduate School, Myongji University, 2003.
K. S. Choi, H. K. Kim and Y. S. Kim, "A Study on the Practical use Status and Problem Analysis of Construction Lifts", Journal of Architectural Institute of Korea, Vol. 22, No. 2, pp.479-482, 2002.
V. W. Y. Tam and I.W. H. Fung, "Tower Crane Safety in the Construction Industry : A Hong Kong Study", Journal of Safety Science Vol. 49, Science Direct, pp. 208-215, 2011.
A. Shapira, Gunnar Lucko and Clifford J. Schexnayder, "Cranes for Building Construction Project", Journal of Construction Engineering and Management, Vol. 131, No. 6, ASCE, pp. 690-700, 2007.
M. A. Hussein, S. Alkass and O. Moselhi, "Optimization Algorithm for Selection and Site Location of Mobile Cranes", Journal of Construction Engineering and Management, Vol. 131, No. 5, ASCE, pp. 579-590, 2005.
S. Tamate, N. Suemasa and T. Katada "Analyse of Instability in Mobile Cranes due to Ground Penetration by Outrigger", Journal of Construction Engineering and Management, Vol. 131, No. 6, ASCE, pp. 689-704, 2005.
H. S. Kim, H. S. Lee and M. S. Park "Quantitative Risk Assessment Methodology for Construction Site", Journal of Korea Institute of Construction Engineering and Management, pp.463-466, 2008.
Department of Defense "System Safety Program Requirements MIL-STD-882B", 1977.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.