최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.24 no.6, 2015년, pp.437 - 442
송기혁 (인하대학교 기계공학과) , 김병찬 (인하대학교 기계공학과) , 윤호섭 (인하대학교 기계공학과) , 양지경 (인하대학교 기계공학과) , 김기범 (인하대학교 기계공학과) , XiaoHo (인하대학교 기계공학과) , 조명우 (인하대학교 기계공학과)
The development of polishing technology has enabled the production of injection molds with high quality surfaces and shapes. For products such as mobile phones which require high quality performance the use of plastic materials has many constraints such as shrinkage and deflection. The purpose of th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
W. J. Smith, 2005, Modern Lens Design, McGraw, New York.
T. S. Kwak, H. Ohmori, W. B. Bae, 2004, A Study on Searching Method of Molding Condition to Control the Thickness Reduction of Optical Lens in Plastic Injection Molding Process, J. Kor. Soc. Precis. Eng., Vol. 21, No. 2, pp. 27~34.
R. Kingslake, R. B. Johnson, 2010, Lens Design Fundamentals 2nded, Amsterdam, Boston.
U. T. Jun, D. H. Hyun, 2006, A Study Birefringence of Injection Molding for Plastics Aspheric Lens, J. Kor. Soc. Manuf. Technol. Eng., Vol. 15, No. 1, pp. 108~112.
Y. Mikio, T. S. Kwak, J. K. Jung, 2012, Application of Birefringence CAE in Mould Design of Optic Lens Injection Molding Process, Kor. KSMPE, Vol. 11, No. 3, pp. 1~6.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.