최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국융합학회논문지 = Journal of the Korea Convergence Society, v.7 no.6, 2016년, pp.75 - 80
Distraction osteogenesis is applied to correct mandible or maxilla deformities. Owing to the distractor being away from the skin, it is not aesthetic. Infection can arise due to manual part. And therefore, it is necessary to make the distractor using a new mechanism. 3D software was used for the int...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
골신장술은 어떠한 치료법으로 이용되고 있는가? | 골신장술은 골신장기(jaw bone distractor)를 이용하여 열성장한 골 부위에 골절단술(corticotomy)을 시행한 후, 골신장기를 통해 간헐적인 힘을 골에 부여하며 조직을 신장하는 방법이다 [1, 2]. 이러한 골신장술은 1992년 하악골을 신장하며 현재까지 구강악안면외과와 성형외과에서 효과적인 악골 기형 치료법으로 이용되고 있다 [3, 4]. 그러나 기존의 골신장기는 치밀골 표면에 고정원으로 나사를 식립하고, 임상의가 안면부위 피부를 관통한 조작부를 통해 골절단 간격을 늘리기 때문에 골에 인가되는 힘은 간헐적인 힘이 되며, 외부 창상에 의한 감염 빈도가 높고, 비심미적이며 피부에 흉터가 크게 남고, 조작부의 파절 등이 발생한다 [fig. | |
악골의 열성장으로 인한 악골 기형 및 부조화의 대표적인 외과적 치료법은? | 악골의 열성장으로 인한 악골 기형 및 부조화의 대표적인 외과적 치료법은 골신장술(Distraction osteogenesis)이다. 골신장술은 골신장기(jaw bone distractor)를 이용하여 열성장한 골 부위에 골절단술(corticotomy)을 시행한 후, 골신장기를 통해 간헐적인 힘을 골에 부여하며 조직을 신장하는 방법이다 [1, 2]. | |
골신장기의 조절부를 없애고, 골에 연속적인 힘을 부여할 수 있는 새로운 방식의 골신장기가 필요하다고 본 이유는? | 이러한 골신장술은 1992년 하악골을 신장하며 현재까지 구강악안면외과와 성형외과에서 효과적인 악골 기형 치료법으로 이용되고 있다 [3, 4]. 그러나 기존의 골신장기는 치밀골 표면에 고정원으로 나사를 식립하고, 임상의가 안면부위 피부를 관통한 조작부를 통해 골절단 간격을 늘리기 때문에 골에 인가되는 힘은 간헐적인 힘이 되며, 외부 창상에 의한 감염 빈도가 높고, 비심미적이며 피부에 흉터가 크게 남고, 조작부의 파절 등이 발생한다 [fig. 1]. |
G. A. Ilizarov, "Clinical application of the tension-stress effect for limb lengthening", Clin Orthop Relat Res, Vol. 250, pp. 8-26, 1990.
J. Cano, J. Campo, L. A. Moreno, A. Bascones, "Osteogenic alveolar distraction: a review of the literature", Oral Surg Oral Med Oral Pathol Oral Radiol Endod, Vol. 101, No. 1, pp. 11-28, 2006.
J. G. McCarthy, J. Schreiber, N. Karp, C. H. Thorne, B. H. Grayson, "Lengthening the human mandible by gradual distraction", Plast Reconstr Surg, Vol. 89, No. 1, pp. 1-8, 1992.
G. S. Mundinger, S. A. Rehim, O. Johnson, J. Zhou, A. Tong, C. Wallner, A. H. Dorafshar, "Distraction Osteogenesis for Surgical Treatment of Craniosynostosis: A Systematic Review", Plast Reconstr Surg, Vol. 138, No. 3, pp. 657-669, 2016
M. T. Ankrum, G. R. Hartwell, J. E. Truitt, "K3 Endo, ProTaper, and ProFile systems: breakage and distortion in severely curved roots of molars", J Endod, Vol. 30, No. 4, pp. 234-237, 2004.
G. Hata, M. Uemura, A. S. Kato, N. Imura, N. F. Novo, T. Toda, "A comparison of shaping ability using ProFile, GT file, and Flex-R endodontic instruments in simulated canals", J Endod, Vol. 28, No. 4, pp. 316-321, 2002.
L. Ming-Yih, L. Chun-Li, T. Wen-Da, L. Lun-Jou, "Biomechanical stability analysis of rigid intraoral fixation for bilateral sagittal split osteotomy", J Plast Reconstr Aesthet Surg, Vol. 63, No. 3, pp. 451-455, 2010.
T. W. Korioth, D. P. Romilly, A. G. Hannam, "Three-dimensional finite element stress analysis of the dentate human mandible", Am J Phys Anthropol, Vol. 88, No. 1, pp. 69-96, 1992.
P. Maurer, S. Holweg, W. D. Knoll, J. Schubert, "Study by finite element method of the mechanical stress of selected biodegradable osteosynthesis screws in sagittal ramus osteotomy", Br J Oral Maxillofac Surg, Vol. 40, No. 1, pp. 76-83, 2002.
M. Chin, B. A. Toth, "Distraction osteogenesis in maxillofacial surgery using internal devices: review of five cases", J Oral Maxillofac Surg, Vol. 54, No. 1, pp. 45-53, 1996.
K. L. Rafferty, Z. Sun, M. A. Egbert, E. E. Baird, S. W. Herring, "Mandibular mechanics following osteotomy and appliance placement II: Bone strain on the body and condylar neck", J Oral Maxillofac Surg, Vol. 64, No. 4, pp. 620-627, 2006.
G. A. Ilizarov, "The principles of the Ilizarov method. 1988", Bull Hosp Jt Dis, Vol. 56, No. 1, pp. 49-53, 1997.
P. Kessler, F. W. Neukam, J. Wiltfang, "Effects of distraction forces and frequency of distraction on bony regeneration", Br J Oral Maxillofac Surg, Vol. 43, No. 5, pp. 392-398, 2005.
J. Wiltfang, P. Kessler, H. A. Merten, F. W. Neukam, "Continuous and intermittent bone distraction using a microhydraulic cylinder: an experimental study in minipigs", Br J Oral Maxillofac Surg, Vol. 39, No. 1, pp. 2-7, 2001.
Boccaccio, A., Lamberti, L., Pappalettere, C., Cozzani, M., Siciliani, G. "Comparison of different orthodontic devices for mandibular symphyseal distraction osteogenesis: a finite element study". Am J Orthod Dentofacial Orthop, Vol. 134, No. 2, pp. 260-269, 2008.
I. H. Yu, Y. K. Wong, "Evaluation of mandibular anatomy related to sagittal split ramus osteotomy using 3-dimensional computed tomography scan images", Int J Oral Maxillofac Surg, Vol. 37, No. 6, pp. 521-528, 2008.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.