최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기品質經營學會誌 = Journal of Korean society for quality management, v.44 no.1, 2016년, pp.77 - 94
이승훈 (동의대학교 산업경영공학과) , 임근 (동의대학교 산업경영공학과)
Purpose: This paper reviews Type 1 Gage study, Gage R&R study, and procedure of ISO 22514-7 for assessing a measurement system, and discusses some relationships between the measurement capability indices. Methods: The gage capability index
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
측정시스템 분석은 무엇인가 | 측정시스템 분석은 제품 개발이나 제조공정에서 품질특성이나 공정변수를 관리하기 위한 통계적 공정관리나 품질관리를 수행함에 있어서 선행적 주요 활동이다. 정확하지 못한 측정은 제품의 품질 판정에 오류를 범할 수 있어서 이에 따른 품질비용의 상승을 수반하게 된다. | |
정확하지 못한 측정은 어떠한 문제를 일으키는가 | 측정시스템 분석은 제품 개발이나 제조공정에서 품질특성이나 공정변수를 관리하기 위한 통계적 공정관리나 품질관리를 수행함에 있어서 선행적 주요 활동이다. 정확하지 못한 측정은 제품의 품질 판정에 오류를 범할 수 있어서 이에 따른 품질비용의 상승을 수반하게 된다. 정확한 측정 결과를 바탕으로 제품의 품질을 지속적으로 개선하기 위해서는 생산되는 제품의 산포를 줄여야 하는데, 이를 위해서는 측정프로세스에 존재하는 변동의 원인을 파악하고 정량화하여야 한다. | |
전형적인 측정능력분석 절차인 Gage R&R study는 어떻게 측정시스템의 합부를 판정하는가 | 전형적인 측정능력분석 절차가 Gage R&R study이다. Gage R&R study에서는 측정실험을 수행하여 반복성(repeatability)과 재현성(reproducibility)에 관한 표준편차 σGRR을 추정하여 총변동량 대비 혹은 공차 대비로 측정능력지수를 산출하여 해당 측정시스템의 합부를 판정한다(AIAG, 2010; Chang and Kim, 2007; Lee and Lee, 2000). 또한 많은 회사에서는 Gage R&R study를 행하기 전에 Type 1 (Gage) study를 먼저 행하여 계측기 자체의 반복성(repeatability) 및 편의(bias)를 평가하고 있다(Bosch 2003, 10; GM 2010, 49). |
Al-Rafaie, Abbas, and Bata, Nour. 2010. "Evaluating Measurement and Process Capabilities by GR&R with Four Quality Measures." Measurement 43:842-851.
Automotive Industry Action Group(AIAG). 2010. Measurement Systems Analysis, 4th ed. Michigan, USA.
Bosch. 2003. Bosch Booklet 10: Capability of Measurement and Test Procedures.
Chang, Mu Sung, and Kim, Sang Bu. 2007. "Estimations of Measurement System Variability and PTR under Nonnormal Measurement Error." Journal of the Korean Society for Quality Management 35: 10-9.
GM. 2010. Measurement Systems Specification Document: SP-Q-MSS, http://www.q-das.com/uploads/tx_sbdownloader/SP-Q-MSS_Final_08-JAN-2010_vG2_01.pdf.
International Organization for Standardization(ISO). 2005. ISO/IEC 17025, General Requirements for the Competence of Testing and Calibration Laboratories, Geneva, Switzerland.
International Organization for Standardization(ISO). 2007. ISO/IEC Guide 99, International Vocabulary of Metrology-Basic and General Concepts and Associated Terms (VIM), Geneva, Switzerland.
International Organization for Standardization(ISO). 2008. ISO/IEC Guide 98-3, Guide to the Expression of the Uncertainty in Measurement (GUM), Geneva, Switzerland.
International Organization for Standardization(ISO). 2012. ISO 22514-7, Statistical Methods in Process Management-Capability and Performance-Part 7: Capability of Measurement Processes, Geneva, Switzerland.
Korean Agency for Technology and Standards. 2012. KS Q ISO 22514-1, Statistical Methods in Process Management-Capability and Performance-Part 1: General Principles and Concepts.
Korean Agency for Technology and Standards. 2014. KS Q ISO 22514-2, Statistical Methods in Process Management-Capability and Performance-Part 2: Process Capability and Performance of Time-Dependent Process Models.
Korean Agency for Technology and Standards. 2011. KS Q ISO 22514-3, Statistical Methods in Process Management-Capability and Performance-Part 3: Machine Performance Studies for Measured Data on Discrete Parts.
Korean Agency for Technology and Standards. 2011. KS Q ISO/TR 22514-4, Statistical Methods in Process Management-Capability and Performance-Part 4: Process Capability Estimates and Performance Measures.
Lee, Seung-Hoon, and Lee, Jong-Hwan. 2000. "A Statistical Software for Measurement Systems Analysis." Journal of the Korean Society for Quality Management 28:175-195.
Majeske, Karl D., and Andrews, Richard W. 2002. "Evaluating Measurement Systems and Manufacturing Processes Using Three Quality Measures." Quality Engineering 15:243-251.
Verband der Automobilindustrie(VDA). 2011. VDA Volume 5-Capability of Measurement Processes, 2nd ed. Berlin, Germany.
White, T. Kelvin, and Borror, Connie M. 2011. "Two-Dimensional Guidelines for Measurement System Indices." Journal of Quality Technology 27:479-487.
Woodall, William H., and Borror, Connie M. 2008. "Some Relationships between Gage R&R Criteria." Quality and Reliability Engineering International 24:99-106.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.