최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.29 no.4, 2016년, pp.363 - 368
장형운 (한국과학기술원 건설 및 환경공학과) , 정재욱 (한국과학기술원 건설 및 환경공학과) , 홍정욱 (한국과학기술원 건설 및 환경공학과)
In this study, we numerically analyze fatigue cracks of curved pipes under cyclic loadings. Numerical models of the curved pipes are developed. The models are verified with the experimental results in terms of fatigue lives and development process of the fatigue cracks. Erosion technique is applied ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
MAT_PLASTIC_KINEMATIC 재료 모델이 피로 균열의 형성 과정을 모사할 수 있을 것으로 고려된 것은 어떤 특성 때문인가? | , 2013). 본 재료 모델은 eroding(요소의 effective plastic strain이 failure strain for eroding element 값 이상이 될 경우 요소를 삭제한다.) 특성을 포함하고 있어 피로 균열의 형성과정을 모사할 수 있을 것으로 고려되었다. | |
원전 사고로 인한 피해는 무엇인가? | , 2014). 원전 사고는 수많은 인명피해와 재산피해를 야기하며, 특히 방사능 유출로 인해 오랜 기간 회복할 수 없는 피해를 발생시킨다. 따라서, 지진 발생시 냉각수 보급을 위한 주요 배관의 안전 여부는 원자력발전소 설계에 있어 매우 중요하다. | |
재해 상황에서 원자력발전소의 발전 기능을 안전하게 정지하기 위한 방법은 무엇인가? | 2011년도에 발생한 후쿠시마 원전 사고로 인해 원전 구조물의 지진에 대한 안정성이 점차 중요해지고 있다. 원자력발전소에 지진과 같은 재해가 발생할 경우, 발전기능을 안전하게 정지하기 위해서는 원자로의 냉각에 필요한 냉각수가 지속적으로 보급되어야 하며, 냉각시스템이 작동하지 않으면 후쿠시마에서 발생한 원전사고와 같은 재앙이 발생할 수 있다(Lee et al., 2014). |
American Society of Mechanical Engineers (2004) B36. 10M Welded and Seamless Wrought Steel Pipe.
Gupta, S.K., Goyal, S., Bhasin, V., Vaze, K.K., Ghosh, A.K., Kushwaha, H.S. (2009) Ratcheting-Fatigue Failure of Pressurized Elbows Made of Carbon Steel ERT-2. React. Technol. pp.1-10.
Ochsner, A., Holm, A., eds (2013) Experimental and Numerical Investigation of Advanced Materials and Structures. Switzerland. Springer.
Takahashi, K., Ando, K., Urabe, Y., Watanabe, S., Hisatsune, M., Hidaka, A. (2009) Low Cycle Fatigue behaviors of Elbow Pipe with Local Wall Thinning. Int. Congr. Adv. Nucl. Power Plants. pp.2073-2080.
Takahashi, K., Tsunoi, S., Hara, T., Ueno, T., Mikami, A., Takada, H., Ando, K., Shiratori, M. (2010) Experimental Study of Low-Cycle Fatigue of Pipe Elbows with Local Wall Thinning and Life Estimation using Finite Element Analysis. Int. J. Press. Vessel. Pip. 87, pp.211-219.
Yahiaoui, K., Moffat, D.G., Moreton, D.N. (2000) Piping Elbows with Cracks Part 2: Global Finite Element and Experimental Plastic Loads under Opening Bending. J. Strain Anal. Eng. Des. 35, pp.47-57.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.