최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.51 no.1, 2018년, pp.47 - 53
정민경 (인하대학교 화학.화학공학융합학과) , 이기백 (영남대학교 화학공학부) , 최진섭 (인하대학교 화학.화학공학융합학과)
Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition includin...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
리튬이온배터리의 음극재인 흑연은 어떤 한계점이 있는가? | 리튬이온배터리는 높은 기전력, 높은 에너지 밀도 및 합리적인 사이클 수명으로 인해 과학 및 산업 분야에서 엄청난 관심을 받고 있으며 전자 장치에서 주요 전원 공급원으로 광범위하게 사용되고 있다[1-3]. 리튬이온배터리의 음극재로는 흑연이 가장 오랫동안 보편적으로 사용되어 왔지만, 낮은 이론용량(372 mAh/g)의 한계점이 있다[4-5]. 이로 인해 실리콘, 주석과 같이 높은 이론용량을 갖는 물질들이 주목받고 있다. | |
흑연을 대체할 수 있는 음극재로는 무엇이 있고 장점은 무엇인가? | 이로 인해 실리콘, 주석과 같이 높은 이론용량을 갖는 물질들이 주목받고 있다. 그 중에서 주석은 높은 이론용량(991 mAh/g) 외에도, 높은 방전 플랫폼으로 인한 안전성, 열역학적 안정성 등의 장점이 있다[6-10]. 하지만, 순수 주석은 리튬화/탈리튬화 과정에서 급격한 부피 변화(~300%)로 인하여 활성 물질의 분쇄와 전극 표면의 균열, 급격한 용량 감소를 유발하기 때문에 음극재로써 실용 가능성이 적다[11-14]. | |
리튬이온배터리의 특징은? | 리튬이온배터리는 높은 기전력, 높은 에너지 밀도 및 합리적인 사이클 수명으로 인해 과학 및 산업 분야에서 엄청난 관심을 받고 있으며 전자 장치에서 주요 전원 공급원으로 광범위하게 사용되고 있다[1-3]. 리튬이온배터리의 음극재로는 흑연이 가장 오랫동안 보편적으로 사용되어 왔지만, 낮은 이론용량(372 mAh/g)의 한계점이 있다[4-5]. |
P.G. Bruce, B. Scrosati, J. M. Tarascon, Nanomaterials for rechargeable lithium batteries, Angew. Chem. Int. Ed. 47 (2008) 2930-2946.
J. B. Goodenough, Y. Kim, Challenges for rechargeable Li batteries, Chem. Mater. 22 (2009) 587-603.
B. Scrosati, J. Garche, Lithium batteries: Status, prospects and future, J. Power Sources 195 (2010) 2419-2430.
M. Noel, R. Santhanam, Electrochemistry of graphite intercalation compounds, J. Power Sources 72 (1998) 53-65.
Y. Liang, J. Frisch, L. Zhi, H. Norouzi Arasi, X. Feng, J.P. Rabe, N. Koch and K. Mullen, Transparent, highly conductive graphene electrodes from acetylene-assisted thermolysis of graphite oxide sheets and nanographene molecules, Nanotechnology 20 (2009) 434007.
M. Zhao, Q. Zhao, J. Qiu, H. Xue, H. Pang, Tin-based nanomaterials for electrochemical energy storage, RSC Adv. 6 (2016) 95449.
B. Wang, B. Luo, X. Li, L. Zhi, The dimensionality of Sn anodes in Li-ion batteries, Mater. Today 15 (2012) 544-552.
M. Winter, J.O. Besenhard, Electrochemical lithiation of tin and tin-based intermetallics and composites, Electrochim. Acta 45 (1999) 31-50.
W.J. Zhang, Lithium insertion/extraction mechanism in alloy anodes for lithium-ion batteries, J. Power Sources 196 (2011) 877-885.
Y. Xie, C.Z. Wu, Design of nano architecture electrode materials applied in new-generation rechargeable lithium ion batteries, Dalton Trans. (2007) 5235-5240.
J.H. Um, H. Park, Y.H. Cho, M.P.B. Glazer, D.C. Dun, H. Choe, Y.E. Sung, 3D interconnected $SnO_2$ - coated Cu foam as a high-performance anode for lithium-ion battery applications, RSC Adv. 4 (2014) 58059.
L.Y. Beaulieu, S.D. Beattie, T.D. Hatchard, J.R. Dahn, The electrochemical reaction of lithium with tin studied by in situ AFM, J. Electrochem. Soc. 150 (2003) A419-A424.
J.O. Besenhard, J. Yang, M. Winter, Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?, J. Power Sources 68 (1997) 87-90.
H. Tian, F. Xin, X. Wang, W. He, W. Han, High capacity group-IV elements (Si, Ge, Sn) based anodes for lithium-ion batteries, Journal of Materiomics 1 (2015) 153-169.
K.D. Kepler, J.T. Vaughey, M.M. Thackeray, $Li_xCu_6Sn_5$ (0
G.X. Wang, L. Sun, D.H. Bradhurst, S.X. Dou, H.K. Liu, Lithium storage properties of nanocrystalline eta-Cu 6 Sn 5 alloys prepared by ball-milling, J. Alloys Compd. 299 (2000) L12-L15.
S.D. Beattie, J.R. Dahn, Single bath, pulsed electrodeposition of copper-tin alloy negative electrodes for lithium-ion batteries, J. Electrochem. Soc. 150 (2003) A894-A898.
Y.L. Kim, H.Y. Lee, S.W. Jang, S.J. Lee, H.K. Baik, Y.S. Yoon, Y.S. Park, S.M. Lee, Nanostructured $Ni_3Sn_2$ thin film as anodes for thin film rechargeable lithium batteries, Solid State Ionics 160 (2003) 235-240.
H. Mukaido, T. Sumi, T. Yokoshima, T. Momma, T. Osaka, Electrodeposited Sn-Ni Alloy Film as a High Capacity Anode Material for Lithium-Ion Secondary Batteries, Electrochem. Solid-State Lett. 6 (2003) A218-A220.
Y. Xu, Optimizing Sn-based anode nanostructure and binder material for use in high-performance lithium-ion batteries, Master of philosophy thesis, Institute for superconducting & electronic materials, Univeristy of Wollongong, 2016.
L. Xue, Z. Fu, Y. Yao, T. Huang, A. Yu, Three-dimensional porous Sn-Cu alloy anode for lithium-ion batteries, Electrochim. Acta 55 (2010) 7310-7314.
J. Qin, X. Zhang, N.Q. Zhao, C.S. Shi, E.Z. Liu, J.J. Lia, C.N. He, Carbon-coated $Ni_3Sn_2$ nanoparticles embedded in porous carbon nanosheets as a lithium ion battery anode with outstanding cycling stability, RSC Adv. 4 (2014) 49247-49251.
D.H. Nam, R.H. Kim, D.W. Han, H.S. Kwon, Electrochemical performances of Sn anode electrodeposited on porous Cu foam for Li-ion batteries, Electrochim. Acta 66 (2012) 126-132.
H.C. Shin, M. Liu, Three-dimensional porous copper-tin alloy electrodes for rechargeable lithium batteries, Adv. Funct. Mater. 15 (2005) 582-586.
M. Haerifar, M. Zandrahimi, Effect of current density and electrolyte pH on microstructure of Mn-Cu electroplated coatings, Appl. Surf. Sci. 284 (2013) 126-132.
S.T. Chang, I.C. Leu, M.H. Hon, Preparation and characterization of nanostructured tin oxide films by electrochemical deposition, Electrochem. Solid-State Lett. 5 (2002) C71-C74.
O. Akhavan, R. Azimirad, S. Safa, E. Hasani, $CuO/Cu(OH)_2$ hierarchical nanostructures as bactericidal photocatalysts, J. Mater. Chem. 21 (2011) 9634-9640.
M. Jung, G. Lee, J. Choi, Electrochemical plating of Cu-Sn alloy in non-cyanide solution to substitute for Ni undercoating layer, Electrochim. Acta 241 (2017) 229-236.
X. Wang, Z. Li, Q. Li, C. Wang, A. Chen, Z. Zhang, R. Fan, L. Yin, Ordered mesoporous $SnO_2$ with a highly crystalline state as an anode material for lithium ion batteries with enhanced electrochemical performance, CrystEngComm 15 (2013) 3696-3704.
G. Zhou, D.W. Wang, L. Li, N. Li, F. Li, H.M. Cheng, Nanosize $SnO_2$ confined in the porous shells of carbon cages for kinetically efficient and long-term lithium storage, Nanoscale 5 (2013) 1576-1582.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.