AI 본문요약

엑셀 다운로드 AI-Helper

질의응답

참고문헌 (29)

1. M.-S. Park, S. Cho, E. Jeong, and Y.-S. Lee, Physico-chemical and electrochemical properties of pitch-based high crystallinity cokes used as electrode material for electric double layer capacitor, J. Ind. Eng. Chem., 23, 27-32 (2015). 

   상세보기

2. S.-M. Lee, D.-S. Kang, and J.-S. Roh, Bulk graphite: Materials and manufacturing process, Carbon Lett., 16, 135-146 (2015). 

3. Y.-G. Wang, Y. Korai, and I. Mochida, Carbon disc of high density and strength prepared from synthetic pitch-derived mesocarbon microbeads, Carbon, 37, 1049-1057 (1999). 

   상세보기

4. I. Mochida, R. Fujiura, T. Kojima, H. Sakamoto, and T. Yoshimura, Carbon disc of high density and strength prepared from heat-treated mesophase pitch grains, Carbon, 33, 265-274 (1995). 

   상세보기

5. Y. Zhao, J. Shi, H. Wang, Z. Tao, Z. Liu, Q. Guo, and L. Liu, A sandwich structure graphite block with excellent thermal and mechanical properties reinforced by in-situ grown carbon nanotubes, Carbon, 51, 427-430 (2013). 

   상세보기

6. E. Savage, Carbon-Carbon Composites, 323-354, Springer, Netherlands (1993). 

7. J. G. Kim, J. H. Kim, J. S. Im, Y.-S. Lee, and T.-S. Bae, Empirical study of petroleum-based pitch production via pressureand temperature-controlled thermal reactions, J. Ind. Eng. Chem., 62, 176-184 (2018). 

   상세보기

8. B. C. Bai, J. G. Kim, J. H. Kim, C. W. Lee, Y.-S. Lee, and J. S. Im, Blending effect of pyrolyzed fuel oil and coal tar in pitch production for artificial graphite, Carbon Lett., 25, 78-83 (2018). 

9. S.-M. Lee, D.-S. Kang, H.-S. Kim, and J.-S. Roh, Changes in the porosity of bulk graphite according to the viscosity of resin for impregnation, Carbon Lett., 16, 132-134 (2015). 

10. J.-H. Kim and Y.-S. Lee, Characteristics of a high compressive strength graphite foam prepared from pitches using a PVA-AAc solution, J. Ind. Eng. Chem., 30, 127-133 (2015). 

    상세보기

11. S. Hussain, A. Trzcinski, H. Asghar, H. Sattar, N. Brown, and E. Roberts, Disinfection performance of adsorption using graphite adsorbent coupled with electrochemical regeneration for various microorganisms present in water, J. Ind. Eng. Chem., 44, 216-225 (2016). 

    상세보기

12. L. Yingquan, Z. Zhengde, D. Chaoquan, and S. Yusheng, Investigation of brazing structure of bulk graphite to a W-Re substrate, Mater. Charact., 44, 425-429 (2000). 

    상세보기

13. S. Ko, C. W. Lee, and J. S. Im, Petrochemical-waste-derived high-performance anode material for Li-ion batteries, J. Ind. Eng. Chem., 36, 125-131 (2016). 

    상세보기

14. F. Chevarin, K. Azari, D. Ziegler, R. Gauvin, M. Fafard, and H. Alamdari, Substrate effect of coke particles on the structure and reactivity of coke/pitch mixtures in carbon anodes, Fuel, 183, 123-131 (2016). 

    상세보기

15. A. Sarkar, D. Kocaefe, Y. Kocaefe, D. Sarkar, D. Bhattacharyay, B. Morais, and J. Chabot, Coke-pitch interactions during anode preparation, Fuel, 117, 598-607 (2014). 

16. V. G. Rocha, C. Blanco, R. Santamaria, E. I. Diestre, R. Menendez, and M. Granda, The effect of the substrate on pitch wetting behaviour, Fuel Process. Technol., 91, 1373-1377 (2010). 

    상세보기

17. V. G. Rocha, C. Blanco, R. Santamaria, E. I. Diestre, R. Menendez, and M. Granda, An insight into pitch/substrate wetting behaviour. The effect of the substrate processing temperature on pitch wetting capacity, Fuel, 86, 1046-1052 (2007). 

    상세보기

18. V. Rocha, C. Blanco, R. Santamaria, E. Diestre, R. Menendez, and M. Granda, Pitch/coke wetting behaviour, Fuel, 84, 1550-1556 (2005). 

    상세보기

19. B. Petrova, T. Budinova, E. Ekinci, N. Petrov, and F. Yardim, Influence of pitch composition and surface properties of petroleum coke on their interaction during the preparation of carbon/carbon composites, Carbon, 45, 704-709 (2007). 

    상세보기

20. K. Li, K. Shen, Z.-H. Huang, W. Shen, G. Yang, J. Yang, and F. Kang, Wettability of natural microcrystalline graphite filler with pitch in isotropic graphite preparation, Fuel, 180, 743-748 (2016). 

    상세보기

21. K. H. Kim, S. Lee, M.-I. Kim, and Y.-S. Lee, The effect of carbon black on reforming of pyrolysis fuel oil for a binder pitch, Fuel, 206, 58-63 (2017). 

    상세보기

22. M.-S. Park, K. H. Kim, and Y.-S. Lee, Fluorination of single- walled carbon nanotube: The effects of fluorine on structural and electrical properties, J. Ind. Eng. Chem., 37, 22-26 (2016). 

    상세보기

23. M.-J. Jung, H.-R. Yu, and Y.-S. Lee, Preparation of fluorinated graphite with high fluorine content and high crystallinity, Carbon Lett., 26, 112-116 (2018). 

24. E. Jeong, B. H. Lee, S. J. Doh, I. J. Park, and Y.-S. Lee, Multifunctional surface modification of an aramid fabric via direct fluorination, J. Fluor. Chem., 141, 69-75 (2012). 

25. A. Almasian, G. C. Fard, M. Mirjalili, and M. P. Gashti, Fluorinated-PAN nanofibers: Preparation, optimization, characterization and fog harvesting property, Carbon, 62, 146-155 (2018). 

26. E. Jeong, T.-S. Bae, S.-M. Yun, S.-W. Woo, and Y.-S. Lee, Surface characteristics of low-density polyethylene films modified by oxyfluorination-assisted graft polymerization, Colloids Surf. A, 373, 36-41 (2011). 

27. J. H. Kim, J. G. Kim, C. W. Lee, K. B. Lee, and J. S. Im, Effect of added mesophase pitch during the pitch synthesis reaction of PFO, Carbon Lett., 23, 48-54 (2017). 

28. J.-H. Kim, K. H. Kim, M.-S. Park, T.-S. Bae, and Y.-S. Lee, Cu nanoparticle-embedded carbon foams with improved compressive strength and thermal conductivity, Carbon Lett., 17, 65-69 (2016). 

29. J.-H. Kim and Y.-S. Lee, The effects of carbon coating onto graphite filler on the structure and properties of carbon foams, Carbon Lett., 21, 111-115 (2017). 

저자의 다른 논문 :

김경훈 (11) 안동해 (4) 이영석 (154)