부산 녹산동 가마터에서 출토된 12세기 조질청자를 중심으로 가마터 4기에서 출토된 35점을 분석 시료로 선정하고 색도, 비중 및 흡수율, 미세구조 관찰과 태토와 유약의 조성을 분석하였다. 청자의 태토 색도는 가마에 상관없이 모두 비슷했으며 4 5호 가마 출토 선정 도편은 2 3호보다 명도가 어둡고, 채도는 회색계와 갈색계로 구분된다. 유약은 적색과 황색의 기여도가 높은 편이다. 선정된 도편의 기공률은 회색계 8.8%이고 갈색계 16.1%로 태토 색상에 따라 차이를 보인다. 태토와 유약의 주성분은 청자의 전형적인 성분 범주에 속하지만 $TiO_2$의 함량이 차이가 있다. 2 3호 가마와 4 5호 가마 청자의 가시적 차이는 사용 원료보다 수비 및 번조공정에 따른 것으로 볼 수 있으며 $Fe_2O_3$와 $K_2O$의 함량 차이는 공정 과정에서 배합기술의 변화를 시도한 결과로 볼 수 있다. 결론적으로 녹산동 청자는 초벌과정 없이 태토에 유약을 바른 후 한 번에 구웠던 제작 공정으로 인하여 태토가 충분히 자화되지 못했으므로 양질의 청자를 제작하기 위하여 가마별로 공정 차이가 있었을 가능성이 높다고 생각된다.
부산 녹산동 가마터에서 출토된 12세기 조질청자를 중심으로 가마터 4기에서 출토된 35점을 분석 시료로 선정하고 색도, 비중 및 흡수율, 미세구조 관찰과 태토와 유약의 조성을 분석하였다. 청자의 태토 색도는 가마에 상관없이 모두 비슷했으며 4 5호 가마 출토 선정 도편은 2 3호보다 명도가 어둡고, 채도는 회색계와 갈색계로 구분된다. 유약은 적색과 황색의 기여도가 높은 편이다. 선정된 도편의 기공률은 회색계 8.8%이고 갈색계 16.1%로 태토 색상에 따라 차이를 보인다. 태토와 유약의 주성분은 청자의 전형적인 성분 범주에 속하지만 $TiO_2$의 함량이 차이가 있다. 2 3호 가마와 4 5호 가마 청자의 가시적 차이는 사용 원료보다 수비 및 번조공정에 따른 것으로 볼 수 있으며 $Fe_2O_3$와 $K_2O$의 함량 차이는 공정 과정에서 배합기술의 변화를 시도한 결과로 볼 수 있다. 결론적으로 녹산동 청자는 초벌과정 없이 태토에 유약을 바른 후 한 번에 구웠던 제작 공정으로 인하여 태토가 충분히 자화되지 못했으므로 양질의 청자를 제작하기 위하여 가마별로 공정 차이가 있었을 가능성이 높다고 생각된다.
The purpose of this study is to analyze the characteristics of low-grade 12th-century celadons, which were excavated from a kiln site in Noksan-dong, Busan. The physical and chemical properties of the body and the glaze are evaluated through scientific analyses. All the selected celadon shards have ...
The purpose of this study is to analyze the characteristics of low-grade 12th-century celadons, which were excavated from a kiln site in Noksan-dong, Busan. The physical and chemical properties of the body and the glaze are evaluated through scientific analyses. All the selected celadon shards have a similar body color, regardless of the kiln from which they originated. The celadon shards from 2 3 kilns are brighter than those from 4 5 kilns, and there are two saturations, namely gray and brown. The brightness of the glaze shows a high contribution of red and yellow. The porosity of the selected shards is 8.8% in the gray saturation and 16.1% in the brown saturation. The major chemical compositions of the body and glaze are in the typical chemical composition of the celadon, but the $TiO_2$ flux contents are different. The visible characteristic difference between the 2 3 kilns and the 4 5 kilns can be attributed to the mixing and the firing process rather than the raw materials used. The difference in the $Fe_2O_3$ and $K_2O$ flux between the 2 3 and 4 5 kilns can be attributed to changes in the ingredient combination during the process. In conclusion, Noksan-dong celadon could not be easier vitrification due to the manufacturing process that primary burning process, It is highly likely that there were process differences in kilns to produce high quality celadon.
The purpose of this study is to analyze the characteristics of low-grade 12th-century celadons, which were excavated from a kiln site in Noksan-dong, Busan. The physical and chemical properties of the body and the glaze are evaluated through scientific analyses. All the selected celadon shards have a similar body color, regardless of the kiln from which they originated. The celadon shards from 2 3 kilns are brighter than those from 4 5 kilns, and there are two saturations, namely gray and brown. The brightness of the glaze shows a high contribution of red and yellow. The porosity of the selected shards is 8.8% in the gray saturation and 16.1% in the brown saturation. The major chemical compositions of the body and glaze are in the typical chemical composition of the celadon, but the $TiO_2$ flux contents are different. The visible characteristic difference between the 2 3 kilns and the 4 5 kilns can be attributed to the mixing and the firing process rather than the raw materials used. The difference in the $Fe_2O_3$ and $K_2O$ flux between the 2 3 and 4 5 kilns can be attributed to changes in the ingredient combination during the process. In conclusion, Noksan-dong celadon could not be easier vitrification due to the manufacturing process that primary burning process, It is highly likely that there were process differences in kilns to produce high quality celadon.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
문제 정의
강진과 부안으로 대표되는 양질청자 뿐만 아니라 그 외 지방가마에서 출토된 조질청자 연구는 고려시대 청자제작의 상황을 종합할 수 있는 중요한 자료로써 본 연구에서는 부산 녹산동 조질청자의 제작기술을 과학·기술적인 측면에서 규명하고자 하였으며, 질적 차이를 보이고 있는 원인을 규명하는 것에 그 목적을 두고 있다.
또한 녹산동 2∼5호 청자가마터 내 요업시기에 따른 원료에 대한 상호 유사성 및 차별성을 파악하고자한다.
제안 방법
고려중기 조질청자의 질적 차이를 보이고 있는 원인을 규명하고자 부산 녹산동 가마별로 구분하여 35점을 대표시료로 선정하여 그 특성을 확인하였다.
청자의 태토나 유약층의 색도는 소성과정 중 일어나는 다양한 물리․화학적 작용이 동시에 작용하여 나타나는 것이므로 도자기의 소성과정을 이해하는 중요한 방법의 하나로 판단된다. 그러므로 부산 녹산동 청자의 색상을 객관적인 수치로 제시하기 위하여 색도를 측정하였다(Table 2,Figure 2).
물리적 특성 중에서 색도 및 반사도는 분광측색계(CM700d, Minolta, Japan)를 이용하여 표준 광원 D65, 시야각10, 분석면적은 3 mm로 조건에서 한 시료당 3회씩 측정하여 평균값 L*, a*, b*로 나타내었다. 부피비중, 흡수율 및 기공률은 비중측정기(GX-13, AND, Japan)와 디지털저울(GR-200, AND, Japan)을 사용하였다.
태토의 주성분은 이외에도 착색산화물인 Fe2O3, TiO2, MnO 외 P2O5를 포함한 모두 10가지원소산화물을 측정하게 된다(Gyeonggi Provincial Museum,2008). 부산 녹산동 조질청자 태토의 주성분을 분석하고 제게르 식으로 통계 처리한 결과를 기초로 출토 가마에 따른 특성을 평가하였다(Table 3, Figure 6).
로 나타내었다. 부피비중, 흡수율 및 기공률은 비중측정기(GX-13, AND, Japan)와 디지털저울(GR-200, AND, Japan)을 사용하였다. 측정 시편은 동체부에서 채취하였으며, 조성 분석을 위한 태토 전처리 과정에서 색도 측정 후, 시료의 무게가 1.
화학적 특성인 태토 주성분은 X-선형광분석기(XRF-1700,SHIMADZU, Japan)를 사용하여 Rh target으로 30 kV, 100mA 조건에서 분석하였다. 시료 전처리는 도편에서 유약을 제거하고 태토 만을 마노 사발을 이용하여 200 mesh 이하로 분말화 하고, 원판 유리시료(glass bead)로 만들어 분석하였다.
유약 주성분은 주사전자현미경(MIRA3, TESCAN, Czech)에 부착된 에너지 분산형 분광기(QUANTAX 200, Bruker,USA)를 사용하여 가속전압 20 kV, 측정시간 100초로 측정하였다.
화학적 특성인 태토 주성분은 X-선형광분석기(XRF-1700,SHIMADZU, Japan)를 사용하여 Rh target으로 30 kV, 100mA 조건에서 분석하였다. 시료 전처리는 도편에서 유약을 제거하고 태토 만을 마노 사발을 이용하여 200 mesh 이하로 분말화 하고, 원판 유리시료(glass bead)로 만들어 분석하였다.
대상 데이터
0 g 이상인 것을 선별하였다. 미세구조는 광학현미경(DM 2500M, LEICA, Germany)을 사용하였다. 전처리 과정으로 에폭시 수지에 정착시킨 도편의 단면을 연마하고 HF용액을 증류수(1 : 6)로 희석한 에칭액에 도편을 3초~수 초간 담궈 에칭한 후 반사광(Reflected light)으로 관찰하였다.
선정 도편은 2∼5호 가마 폐기소에서 발굴된 도편으로4개 가마 폐기소에서 출토된 청자 태토와 유약의 색상, 태토 단면의 치밀도, 구성 입자 등을 고려하여 각 층위별 대표성을 갖는 청자 대접 35점을 선정하였다.
부피비중, 흡수율 및 기공률은 비중측정기(GX-13, AND, Japan)와 디지털저울(GR-200, AND, Japan)을 사용하였다. 측정 시편은 동체부에서 채취하였으며, 조성 분석을 위한 태토 전처리 과정에서 색도 측정 후, 시료의 무게가 1.0 g 이상인 것을 선별하였다. 미세구조는 광학현미경(DM 2500M, LEICA, Germany)을 사용하였다.
성능/효과
물리적 특성에서 태토의 명도(L*)는 2·3호 보다 4·5호 가마의 도편이 어두운 것을 확인하였으며 유약의 채도는 태토색이 유약의 녹색빛을 상쇄하는 역할을 하고 유약 자체도 완벽히 환원상태에서 소성되지 않아 갈색요소를 함유한 것을 확인하였다.
미세구조 관찰 결과에서 녹산동 청자는 태토의 경우 대부분 소성되지 않아 자화도가 좋지 않은 것으로 확인된다. 태토내의 부정형의 기공이 많이 분포하며, 잔존하는 광물이 조립질이고 원마도가 좋지 않으며 유리질화 되지 않은 장석이 관찰되었다.
색도측정 결과에서 동일 가마 청자보다 명도(L*)가 10∼20정도 낮은 mu-17(2호 가마), 29, 30, 31, 32(3호 가마) 도편은 Fe2O3가 다른 도편보다 2배 이상 높다.
%이다. 태토 주성분 측정 결과에서 철산화물이 높게 측정된 mu-17도편은 유약 주성분 분석 결과 동일 가마 도편보다 철산화물이 높게 확인된다. 3호 가마는 SiO2 53.
후속연구
다른 지역보다 조성에서 TiO2의 함량이 차이는 색상과 관련이 있을 수 있으나 유색은 발색성분 이외에도 소성조건이 주요 변화요인으로 작용하므로 종합적으로 검토할 필요가 있으며 부산 녹산동 만을 대상으로 조질청자의 특성으로 보기에는 무리가 따른다. 앞으로 지방가마의 조질청자에 대한 실험이 행해져 양질청자와의 본격적인 기술적비교가 이루어지길 기대한다.
의 함량이 차이는 색상과 관련이 있을 수 있으나 유색은 발색성분 이외에도 소성조건이 주요 변화요인으로 작용하므로 종합적으로 검토할 필요가 있으며 부산 녹산동 만을 대상으로 조질청자의 특성으로 보기에는 무리가 따른다. 앞으로 지방가마의 조질청자에 대한 실험이 행해져 양질청자와의 본격적인 기술적비교가 이루어지길 기대한다.
질의응답
핵심어
질문
논문에서 추출한 답변
부산 녹산동 청자가마터에서 주로 생산된 청자는 어떤 청자인가?
조질청자는 생산된 기종과 기형에서 흑유자기를 동반 생산한 계통과 품질이 매우 낮은 계통, 그리고 강진의 양질청자를 모방한 계통으로 구분된다(Lee,2004; Kim, 2006; Kang, 2016). 부산 녹산동 청자가마터는 초벌과정이 생략되고 철화를 시문한 청자가 주로 생산되며 품질이 낮은 청자라는 점을 볼 때, 고려 중기 강진과 부안지역의 가마로부터 영향을 받아 지방의 수요를 충당하기 위해 조성한 요업단지로 추정된다(Foundation of East-AsiaCultural Properties Institute, 2012).
이번 실험에서 4호 가마의 청자가 다른 가마들의 청자보다 많이 함유하고 있는 것은 무엇인가?
유약은 대부분의 도편에서 잔존하는 석영과 150∼600 ㎛크기의 장석이 소량 관찰된다. 유약이 완전히 유리질화 되지 않았음에도 불구하고 다른 가마의 청자보다 anorthite가 많이 보인다.
녹산동 청자가마터가 입지한 곳은?
물, 연료, 원료가 비교적 풍부하고 고려시대 김해부의외곽지대로 13조창 중 하나인 석두창과의 해상교통이 편리한 곳에 입지한 녹산동 청자가마터는 도기가마 1기, 도기폐기장 1개소, 자기가마 4기, 자기폐기장 5개소, 기와가마 1기 요업시설로 추정되는 수혈 및 주혈군이 함께 조사되었다. 자기가마 4기의 폐기장에서 출토된 유물의 양식적인 특징 등에 따라 12세기 전엽~중엽으로 넘어가는 과도기적인 시기에 운영된 가마터에 해당된다.
참고문헌 (17)
Bang, B.S., 1993, A technic historical study on the Koryo Celadon. KOREAN Journal of Art History, 5-21. (in Korean)
Chang, N.W., 2003, Study of mid Koryo celadons. Doctor's thesis, Ewha Womans University, Seoul. (in Korean with English abstract)
Foundation of East-Asia Cultural Properties Institute, 2012, The excavation report of cultural relics in the Noksan-dong kiln site of celadon in Busan. (in Korean with English abstract)
Gyeonggi Provincial Museum, 2008, Analytical of the royal kiln complex at Gwangju in Gyeonggi province.
Han, M.S., 2006, A scientific provenance study for Goryeo celadon excavated from seabed. Doctor's thesis, Chung-Ang University, Seoul. (in Korean with English abstract)
Kang, K.I., 2010, A study on the change of the kiln structure and color of Goryeo celadon. 12th Koryo celadon Academic Seminar, Gangjin, August 16. (in Korean)
Kang, K.I., 2016. Recent technological change of Goryeo celadon in Gangjin area. Study of ceramic art, 25. (in Korean)
Kim, J.A., 2006, A scientific analysis study on Koryo Celadon in the 11-12C. Master's thesis, Chung-Ang University, Seoul. (in Korean with English abstract)
Lee, J.M., 2004, The system and dating of low-grade Celadons in the 11th to 12th Centuries AD. Art History, 18, 149-17. (in Korean with English abstract)
Lee, J.M., 2012, Distribution and character of production kiln sites in early Goryo celdon. History and Discourse : Journal of Historical Review, 63, 151-184. (in Korean with English abstract)
Lee, Y.E., 1998, Compositional and microstructural study of Choson Punchong. Doctor's thesis, Chung-ang University, Seoul, 44-91. (in Korean with English abstract)
Lee, Y.E., 2013, The color of the Goryeo celadon: composition and microstructure of pi-saek celadon. Information Art, 83. (in Korean with English abstract)
Lee, Y.E., Kim, G.H. and Koh, K.S., 2005, A scientific study of early Koryo and whiteware. The Korean History of Science Society, 27(1). (in Korean with English abstract)
Lee, Y.S., 2001, Analytical and statistical study on the raw materials of Korean traditional ceramics. Master's thesis, Chung-Ang University, Seoul. (in Korean with English abstract)
Mun, C.S. and Choi, T.H., 2003, Ceramic engineering 1 -Basic-. Dooyangsa, Seoul. (in Korean)
Prudence, M.R., 1987, Pottery analysis. The University of Chicago Press/Chicago and London, Chicago.
Wood, N., 1999, Chinese glazes -Their origins, chemistry and recreation. The University of Pennsylvania Press, Philadelphia, 27-45.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.