최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, v.30 no.5, 2021년, pp.247 - 254
김양곤 (한국생산기술연구원 스마트제조기술연구그룹) , 황병철 (서울과학기술대학교 신소재공학과) , 이동근 (순천대학교 신소재공학과) , 고영건 (영남대학교 신소재공학부) , 이성학 (포항공과대학교 신소재공학과)
This study reviews dynamic deformation behavior of ultra-fine-grained Al alloys, ultra-fine-grained conventional low carbon steel and dual phase steel and Zr-based amorphous alloys. Dynamic tests were conducted using a Kolsky bar then the test data was analyzed in relation to resultant microstructur...
H. S. Lee, B. C. Hwang, S. Lee, C. G. Lee, S. J. Kim, 2004, Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels, Metall. Mater. Trans. A Vol. 35, No. 8, pp. 2371-2382. https://doi.org/10.1007/s11661-006-0217-5
K. M. Cho, S. Lee, S. R. Nutt, J. Duffy, 1993, Adiabatic shear band formation during dynamic torsional deformation of an HY-100 steel, Acta Mater. Vol. 41, No. 3, pp. 923-932. https://doi.org/10.1016/0956-7151(93)90026-O
K. Cho, Y. C. Choi, J. Duffy, 1990, Microscopic observations of adiabatic shear bands in three different steels, Metall. Mater. Trans. A Vol. 21, No. 5, pp. 1161-1175. https://doi.org/10.1007/BF02698247
H. C. Roger, 1979, Adiabatic plastic deformation, Ann. Rev. Mater. Sci. Vol. 9, pp. 283-311. https://doi.org/10.1146/annurev.ms.09.080179.001435
S. P. Timothy, I.M. Hutching, 1985, The structure of adiabatic shear bands in a titanium alloy, Acta Metall. Vol. 33, No. 4, pp. 667-676. https://doi.org/10.1016/0001-6160(85)90030-6
L. Dupuy, J. -J. Blandin, 2002, Damage sensitivity in a commercial Al alloy processed by equal channel angular extrusion, Acta Mater. Vol. 50, No. 12, pp. 3253-3266. https://doi.org/10.1016/S1359-6454(02)00147-7
M. Diaz-Fuentes, A. Iza-Mendia, I. Gutierrez, 2003, Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior, Metall. Mater. Trans. A Vol. 34, No. 11, pp. 2505-2516. https://doi.org/10.1007/s11661-003-0010-7
F. Szuecs, C. P. Kim, W. L. Johnson, 2001, Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite, Acta Mater. Vol. 49, No. 9, pp. 1507-1513. https://doi.org/10.1016/S1359-6454(01)00068-4
S.P. Timothy, 1987. The structure of adiabatic shear bands in metals: A critical review, Acta Metall. Vol. 35, No. 2, pp. 301-306. https://doi.org/10.1016/0001-6160(87)90238-0
D. -G. Lee, Y. G. Kim, D.Y. Nam, S. M. Hur, S. Lee, 2005, Dynamic deformation behavior and ballistic performance of Ti-6Al-4V alloy containing fine α 2 (Ti 3 Al) precipitates, Mater. Sci. Eng. A Vol. 391, No. 1-2, pp. 221-234. https://doi.org/10.1016/j.msea.2004.08.076
R. G. Davies, 1981, Hydrogen embrittlement of dual-phase steels, Metall. Trans. A Vol. 12, No. 8, pp. 1667-1672. https://doi.org/10.1007/BF02643572
G. Thomas, J. Y. Koo, 1979, Structure and Properties of Dual Phase Steels, R. A. Kot and J. W. Morris, eds., AIME, New York pp. 183-201
N. J. Kim, G. Thomas, 1981, Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C steel, Metall. Trans. A Vol. 12, No. 3, pp. 483-489. https://doi.org/10.1007/BF02648546
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.