최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Energy conversion and management, v.229, 2021년, pp.113715 -
Suresh Patil, Mahesh (Corresponding author.) , Seo, Jae-Hyeong , Lee, Moo-Yeon
Abstract The objective of this study is to investigate direct cooling performance characteristics of Li-ion battery and battery pack for electric vehicles using dielectric fluid immersion cooling (DFIC) technology. The experimental results showed that Li-ion pouch cell immersed in flowing dielectri...
Energy Convers Manage Liu 150 304 2017 10.1016/j.enconman.2017.08.016 Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review
10.3390/en11102550 Patil M, Panchal S, Kim N, Lee M-Y. Cooling Performance Characteristics of 20 Ah Lithium-Ion Pouch Cell with Cold Plates along Both Surfaces. Energies 2018; 11: 2550. https://doi.org/10.3390/en11102550.
Int J Heat Mass Transf Patil 155 119728 2020 10.1016/j.ijheatmasstransfer.2020.119728 Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate
Appl Therm Eng Du 121 501 2017 10.1016/j.applthermaleng.2017.04.077 An investigation of irreversible heat generation in lithium ion batteries based on a thermo-electrochemical coupling method
Appl Energy Liu 263 114640 2020 10.1016/j.apenergy.2020.114640 Self-adapting J-type air-based battery thermal management system via model predictive control
Int J Energy Res Patil 1 2020 Numerical study on sensitivity analysis of factors influencing liquid cooling with double cold-plate for lithium-ion pouch cell
Energy Convers Manage Qin 195 1371 2019 10.1016/j.enconman.2019.05.084 Experimental and numerical study on a novel hybrid battery thermal management system integrated forced-air convection and phase change material
Energy Convers Manage Wu 138 486 2017 10.1016/j.enconman.2017.02.022 Experimental investigation on the thermal performance of heat pipe-assisted phase change material based battery thermal management system
J Power Sources Siddique 401 224 2018 10.1016/j.jpowsour.2018.08.094 A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations
J Power Sources Zhao 255 29 2014 10.1016/j.jpowsour.2013.12.138 An experimental study of lithium ion battery thermal management using flexible hydrogel films
Int J Heat Mass Transf Panchal 135 368 2019 10.1016/j.ijheatmasstransfer.2019.01.076 Heat and mass transfer modeling and investigation of multiple LiFePO4/graphite batteries in a pack at low C-rates with water-cooling
Appl Therm Eng Chen 94 846 2016 10.1016/j.applthermaleng.2015.10.015 Comparison of different cooling methods for lithium ion battery cells
IEEE Open J Veh Technol Sundin 1 82 2020 10.1109/OJVT.2020.2972541 Thermal management of li-ion batteries with single-phase liquid immersion cooling
Proc Asian Conf Therm Sci Seo 2017 Numerical study on the cooling performances of various cooling methods for laminated type battery
J Power Sources Park 227 191 2013 10.1016/j.jpowsour.2012.11.039 Battery cell arrangement and heat transfer fluid effects on the parasitic power consumption and the cell temperature distribution in a hybrid electric vehicle
Int J Energy Res Karimi 38 14 1793 2014 10.1002/er.3173 Thermal analysis of high-power lithium-ion battery packs using flow network approach: Thermal management of a high-power Li-ion battery pack
M&I Materials Limited. MIVOLT LIQUID IMMERSION COOLING, Dielectric fluids for safer, cooler, greener high performance EV batteries. 2020. https://mivoltcooling.com/downloads/MIVOLT-Battery-Brochure.pdf (accessed July 29, 2020).
M&I Materials Ltd. I-CoBat : Immersion-Cooled Battery 2020. https://gtr.ukri.org/projects?ref=105305 (accessed July 29, 2020).
3MTM NovecTM 7000 Engineered Fluid 2020. https://multimedia.3m.com/mws/media/121372O/3m-novec-7000-engineered-fluid-tds.pdf (accessed August 7, 2020).
XING - Immersio 2020. https://www.xingmobility.com/immersio-battery-system (accessed July 29, 2020).
10.3390/wevj1010126 Kim G-H, Pesaran A. Battery Thermal Management Design Modeling. World Electr Veh J 2007; 1:126-33. https://doi.org/10.3390/wevj1010126.
Appl Therm Eng Deng 142 10 2018 10.1016/j.applthermaleng.2018.06.043 Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: A review
Johnson N, Meyring W, Rivers. Application of Fluid Protection for Increased Safety and Efficiency of Lithium-Ion Battery and Electronic Devices n.d. https://nfpa.org/-/media/Files/News-and-Research/Resources/Research-Foundation/Symposia/2016-SUPDET/2016-Papers/SUPDET2016Smith.ashx (accessed July 28, 2020).
J Electrochem Soc Hunt 163 9 A1846 2016 10.1149/2.0361609jes Surface cooling causes accelerated degradation compared to tab cooling for lithium-ion pouch cells
Thesis P, Zhao Y. A combined experimental and modelling study for understanding lithium ion behaviour under complex thermal boundary conditions and cell design optimisation. 2019.
J Electrochem Soc Zhao 165 13 A3169 2018 10.1149/2.0901813jes Modeling the effects of thermal gradients induced by tab and surface cooling on lithium ion cell performance
Energy Storage Mater Feng 10 246 2018 10.1016/j.ensm.2017.05.013 Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Appl Energy Zhang 261 114440 2020 10.1016/j.apenergy.2019.114440 Computational identification of the safety regime of Li-ion battery thermal runaway
Theory Guide ANSYS Inc 2018 Release 19.1, Help System
J Electrochem Soc Kim 158 8 A955 2011 10.1149/1.3597614 Multi-domain modeling of lithium-ion batteries encompassing multi-physics in varied length scales
Appl Therm Eng Zhang 173 115216 2020 10.1016/j.applthermaleng.2020.115216 Thermal analysis of a 6s4p Lithium-ion battery pack cooled by cold plates based on a multi-domain modeling framework
J Storage Mater Tran 32 101785 2020 Effect of integrating the hysteresis component to the equivalent circuit model of Lithium-ion battery for dynamic and non-dynamic applications
Int J Heat Mass Transf Panchal 109 1239 2017 10.1016/j.ijheatmasstransfer.2017.03.005 Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery
J Power Sources Kim 189 1 841 2009 10.1016/j.jpowsour.2008.10.019 Modeling for the scale-up of a lithium-ion polymer battery
J Electrochem Soc Yi 160 3 A437 2013 10.1149/2.039303jes Three-dimensional thermal modeling of a lithium-ion battery considering the combined effects of the electrical and thermal contact resistances between current collecting tab and lead wire
J Power Sources Kwon 163 1 151 2006 10.1016/j.jpowsour.2006.03.012 A two-dimensional modeling of a lithium-polymer battery
J Power Sources Kim 180 2 909 2008 10.1016/j.jpowsour.2007.09.054 Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
J Power Sources Yi 244 143 2013 10.1016/j.jpowsour.2013.02.085 Modeling the temperature dependence of the discharge behavior of a lithium-ion battery in low environmental temperature
J Electrochem Soc Hatchard 148 7 A755 2001 10.1149/1.1377592 Thermal model of cylindrical and prismatic lithium-ion cells
A123 systems. Cell Applications - Integrated Lithium-ion Applications | A123 Systems n.d. http://www.a123systems.com/automotive/products/cells/ (accessed July 25, 2020).
J Power Sources Lin 294 633 2015 10.1016/j.jpowsour.2015.06.129 Thermal analysis of large-capacity LiFePO4 power batteries for electric vehicles
10.3390/en11051243 Neupane S, Alipanah M, Barnes D, Li X. Heat Generation Characteristics of LiFePO4 Pouch Cells with Passive Thermal Management. Energies 2018;11:1243. https://doi.org/10.3390/en11051243.
Energy Bazinski 114 1085 2016 10.1016/j.energy.2016.08.087 Measuring and assessing the effective in-plane thermal conductivity of lithium iron phosphate pouch cells
Int J Energy Res Wei 44 12 9466 2020 10.1002/er.5016 A comprehensive study on thermal conductivity of the lithiumion battery
J Electrochem Soc Wu 162 1 A181 2015 10.1149/2.0831501jes Thermal design for the pouch-type large-format lithium-ion batteries: I. Thermo-electrical modeling and origins of temperature non-uniformity
Appl Therm Eng Bai 126 17 2017 10.1016/j.applthermaleng.2017.07.141 Thermal management performances of PCM/water cooling-plate using for lithium-ion battery module based on non-uniform internal heat source
Appl Therm Eng Li 146 866 2019 10.1016/j.applthermaleng.2018.10.061 Experiment and simulation for pouch battery with silica cooling plates and copper mesh based air cooling thermal management system
Appl Energy Saw 177 783 2016 10.1016/j.apenergy.2016.05.122 Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
J Power Sources Fan 238 301 2013 10.1016/j.jpowsour.2013.03.050 A parametric study on thermal management of an air-cooled lithium-ion battery module for plug-in hybrid electric vehicles
Appl Therm Eng Li 147 829 2019 10.1016/j.applthermaleng.2018.11.009 Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate
Appl Energy Liu 259 114143 2020 10.1016/j.apenergy.2019.114143 Comparative study on substitute triggering approaches for internal short circuit in lithium-ion batteries
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.