최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Energy : technologies, resources, reserves, demands, impact, conservation, management, policy, v.44 no.1, 2012년, pp.11 - 19
Kapil, A. , Bulatov, I. , Smith, R. , Kim, J.K.
A large amount of low grade energy is often wasted without heat recovery in the process industry. Over-the-fence heat integration for district heating (DH) can be suggested to utilize this waste heat and therefore alleviate the carbon footprint of the integrated energy system. The economic performan...
UK Department of Energy and Climate Change
UK Department of Energy and Climate Change
UK Department of Energy and Climate Change
Energy Perry 33 10 1489 2008 10.1016/j.energy.2008.03.008 Integrating waste and renewable energy to reduce the carbon footprint of locally integrated energy sectors
UK Department of Energy and Climate Change
Energy Policy McKenna 38 10 5878 2010 10.1016/j.enpol.2010.05.042 Spatial modelling of industrial heat loads and recovery potentials in the UK
Davies
Energy Ajah 33 6 908 2008 10.1016/j.energy.2007.12.003 On the robustness, effectiveness and reliability of chemical and mechanical heat pumps for low-temperature heat source district heating: a comparative simulation-based analysis and evaluation
Applied Thermal Engineering Ajah 27 1158 2007 10.1016/j.applthermaleng.2006.02.039 Integrated conceptual design of a robust and reliable waste-heat district heating system
Applied Energy Holmgren 83 12 1351 2006 10.1016/j.apenergy.2006.02.001 Role of a district-heating network as a user of waste-heat supply from various sources - the case of Goteborg
Energy Policy Svensson 36 11 4178 2008 10.1016/j.enpol.2008.07.017 Excess heat from kraft pulp mills: trade-offs between internal and external use in the case of Sweden - part 1: Methodology
Energy Policy Jonsson 36 11 4186 2008 10.1016/j.enpol.2008.07.027 Excess heat from kraft pulp mills: trade-offs between internal and external use in the case of Sweden - part 2: results for future energy market scenarios
Nordic Pulp and Paper Research Journal Axelsson 21 4 466 2006 10.3183/NPPRJ-2006-21-04-p466-475 Heat integration opportunities in average Scandinavian kraft pulp mills: pinch analyses of model mills
Nordic Pulp and Paper Research Journal Axelsson 21 4 485 2006 10.3183/NPPRJ-2006-21-04-p485-492 Increased capacity in kraft pulp mills: lignin separation and reduced steam demand compared with recovery boiler upgrade
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy Carcasci 215 5 529 2001 10.1243/0957650011538785 Part load operating strategies for gas turbines in district heating applications
Computers and Chemical Engineering Dhole 17 Suppl. 101 1993 10.1016/0098-1354(93)80214-8 Total site targets for fuel co-generation, emissions, and cooling
Applied Thermal Engineering Klemes 17 8-10 993 1997 10.1016/S1359-4311(96)00087-7 Targeting and design methodology for reduction of fuel, power and CO2 on total sites
Raissi K. Total site integration. PhD thesis. Manchester, UK: UMIST; 1994.
Energy Conversion and Management Rolfsman 45 4 595 2004 10.1016/S0196-8904(03)00174-2 Optimal supply and demand investments in municipal energy systems
Aguillar O. Design and optimisation of flexible utility systems. PhD thesis. Manchester, UK: University of Manchester; 2005.
Site-wide low-grade heat recovery with a new cogeneration targeting. chemical engineering research and design Kapil 2011
Energy Weber 36 1292 2011 10.1016/j.energy.2010.11.014 Optimisation based design of district energy system for an eco-town in the United Kingdom
Energy Dalla Rosa 36 6890 2011 10.1016/j.energy.2011.10.001 Low-energy district heating in energy-efficient building areas
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.