최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Tunnelling and underground space technology, v.52, 2016년, pp.44 - 61
Paltrinieri, E. , Sandrone, F. , Zhao, J.
This paper focuses on performance analysis of Tunnel Boring Machine (in particular gripper TBMs) in highly jointed rock masses and fault zones. In order to investigate possible relationships between these difficult excavation conditions and TBM performance, the data of several tunnel projects have b...
Afrouz 1992 Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure
Barla, G., Pelizza, S., 2000. TBM tunnelling in difficult ground conditions. In: Paper Presented At the GeoEng2000 - An International Conference on Geotechnical and Geological Engineering, Melbourne, Australia.
Barton 2000 TBM Tunneling in Jointed and Fault Rock
Rock Mech. Barton 6 4 189 1974 10.1007/BF01239496 Engineering classification of rock masses for the design of tunnel support
Bieniawski, Z.T., 1976. Rock mass classification in rock engineering. In: Bieniawski, Z.T. (Ed.), Paper Presented At the Exploration for Rock Engineering, Proc. Symp., Cape Town.
Bruland, A., 1998. Hard Rock Tunnel Boring. PhD, Norwegian University of Science and Technology, Trondheim.
Burgi, C., 1999. Cataclastic Fault Rocks in Underground Excavations: A Geological Characterisation. PhD, EPFL.
Christe, P., 2009. Geological Characterization of Cataclastic Rock Samples Using Medical X-ray Computerized Tomography: Towards a Better Geotechnical Description. PhD, EPFL.
Tunnell. Undergr. Space Technol. Delisio 33 131 2013 10.1016/j.tust.2012.06.015 Analysis and prediction of TBM performance in blocky rock conditions at the Lotschberg Base Tunnel
Tunnell. Undergr. Space Technol. Delisio 43 440 2014 10.1016/j.tust.2014.06.004 A new model for TBM performance prediction in blocky rock conditions
Tunnell. Undergr. Space Technol. Einstein 11 2 141 1996 10.1016/0886-7798(96)00014-4 Risk and risk analysis in rock engineering
Quart. J. Eng. Geol. Geological Society Engineering Group Working Party 28 3 207 1995 10.1144/GSL.QJEGH.1995.028.P3.02 The description and classification of weathered rock for engineering purposes
Habimana, J., 1999. Caracterisation geomecanique de roches cataclastiques rencontrees dans des ouvrages souterrains alpins. PhD, EPFL.
Int. J. Rock Mech. Min. Sci. Habimana 39 677 2002 10.1016/S1365-1609(02)00042-4 Geomechanical characterisation of cataclastic rocks: experience from the Cleuson-Dixence project
Tunnell. Undergr. Space Technol. Hassanpour 26 5 595 2011 10.1016/j.tust.2011.04.004 A new hard rock TBM performance prediction model for project planning
Geotechnique Hoek 23 3 187 1983 10.1680/geot.1983.33.3.187 Strength of jointed rock masses
Hoek, E., Brown, E.T., 1988. The Hoek-Brown failure criterion - a 1988 update. In: Paper Presented At the 15th Canadian Rock Mech. Symp., Toronto.
Hoek, E., Carranza-Torres, C., Corkum, B., 2002. Hoek-Brown criterion - 2002 edition. In: Paper Presented At the 5th North American Rock Mechanics Symp., Toronto.
Bull. Eng. Geol. Environ. Hoek 57 151 1998 10.1007/s100640050031 Applicability of the Geological Strength Index (GSI) classification for the very weak and sheared rock masses. The case of the Athens schist formation
Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Hudson 16 339 1979 10.1016/0148-9062(79)90001-9 Discontinuities and rock mass geometry
Klein, S., 2001. An approach to the classification of weak rocks for tunnel projects. In: Paper Presented At the Proc. Rapid Excavation and Tunn. Conf., San Diego, CA, USA.
Klein, S., Schmoll, M., Avery, T., 1995. TBM performance at four hard rock tunnels in California. In: Proceedings of the Rapid Excavation and Tunnelling Conference.
Loew, S., Barla, G., Diederichs, M., 2010. Engineering geology of Alpine tunnels: past, present and future. In: Paper Presented At the 11th IAEG Congress, Auckland.
Bull. Eng. Geol. Environ. (IAEG) Marinos 60 85 2001 10.1007/s100640000090 Estimating the geotechnical properties of heterogeneous rock masses such as flysch
Palmstrom, A., Berthelsen, O., 1988. The significance of weakness zones in rock tunnelling. In: Paper Presented At the International Conference on Rock Mechanics and Power Plants, Madrid, Spain.
Paltrinieri, E., Sandrone, F., 2014. A study of the TBM performance in fault zones and highly fractured rocks. In: Paper Presented At the World Tunnel Congress, Iguassu Falls, Brazil.
Tunnell. Undergr. Space Technol. Ramoni 25 2 139 2010 10.1016/j.tust.2009.10.003 Tunnel boring machines under squeezing conditions
Geomechanik und Tunnelbau (Geomech. Tunnell.) Rostami 1 1 18 2008 10.1002/geot.200800002 Hard rock TBM cutterhead modeling for design and performance prediction
Santi, P.M., 1995. Classification and Testing of Weak and Weathered Rock Materials: A Model Based on Colorado Shales. PhD, Colorado School of Mines, Golden CO.
Santi, P.M., Doyle, B.C., 1997. The Locations and Engineering Characteristics of Weak Rock in the U.S. Denver, CO: Association of Engineering Geologists, Special Publication #9.
Environ. Eng. Geosci. Santi 12 1 1 2006 10.2113/12.1.1 Field methods for characterizing weak rock for engineering
Int. J. Rock Mech. Min. Sci. Sapigni 39 6 771 2002 10.1016/S1365-1609(02)00069-2 TBM performance estimation using rock mass classifications
Mitt. Osterr. Geol. Ges. Sausgruber 94 157 2003 The relevance of brittle fault zones in tunnel construction - lower inn valley feeder line north of Brenner Base tunnel, Tyrol, Austria
Felsbau Schubert 18 2 7 2000 Tunnelling in fault zones-state of the art in investigation and construction
Felsbau Schubert 15 6 483 1997 Influence of faults on tunnelling
10.1016/S1571-9960(04)80134-4 Thuro, K., Scholz, M., 2003. Deep weathering and alteration in granites - a product of coupled processes. In: Paper Presented At the International Conference on Coupled T-H-M-C in Geosystem: Fundamentals, Modelling, Experiments and Application, GeoProc 2003, Stockholm, Royal Institute of Technology (KTH).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.