최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기마이크로전자 및 패키징 학회지 = Journal of the Microelectronics and Packaging Society, v.24 no.1, 2017년, pp.1 - 8
홍원식 (전자부품연구원 융복합전자소재연구센터) , 양형우 (전자부품연구원 융복합전자소재연구센터) , 박지연 (전자부품연구원 융복합전자소재연구센터) , 오철민 (전자부품연구원 융복합전자소재연구센터) , 이우성 (전자부품연구원 융복합전자소재연구센터) , 김승겸 (세원특수금속(주)) , 한상조 (세원특수금속(주)) , 심금택 (세원특수금속(주)) , 김휘준 (한국생산기술연구원 뿌리산업기술연구소 주조공정그룹)
Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전기강판(electrical steel sheet)용 합금은 특성은? | 최근 사용되고 있는 백색가전뿐 아니라 모바일 전자제품에는 다양한 형태와 기능의 자성소재가 사용되고 있으며, 연자성 복합소재의 원자재로 사용되는 희소금속은 수급 불안에 따른 원가상승 및 공급불안 현상이 증가되고 있는 것이 현실이다.3-6) 전기강판(electrical steel sheet)용 합금은 Fe-(3~3.5) %Si를 주요 조성으로 사용하고 있으며, 자속밀도가 높고, 저주파에서 에너지 손실이 낮아 변압기 또는 모터 코어 소재로 사용되고 있다. 그러나 코어용 형상을 제조하기 | |
ICP 분석의 단점은? | 주조된 모합금의 성분분석을 위해 induced coupled plasma (ICP) 와 에너지분산스펙트럼(energy dispersive spectrometry, EDS) 분석을 통해 분석된 조성을 비교하였다. ICP 분석의 경우, 분석장비의 특성상 Al과 Si의 조성이 정확히 분석되지 않는 단점이 있으며, EDS 분석의 경우 정량분석이 아니라는 단점이 있다. 그러나 용해공정 중 단시간에 공정조건과 장입조성을 결정하기 위해 ICP와 EDS의 조성간의 차이와 비율을 이용하여 용해과정에 활용하였다. | |
폐스크랩을 이용하여 제조된 분말의 경우 불순물을 제거하는 공정이 요구되는 이유는? | 폐스크랩을 이용하여 제조된 분말의 경우, 모합금의 불순물(Mn, S, P,C) 농도에 따라 분말의 제조되는 상태가 달라지게 된다. 특히 폐스크랩에는 Mn이 미량 함유되어 있기 때문에 용해 중 산화환원 반응을 통해 MnS 등과 같은 형태로 불순물을 제거하는 공정이 요구된다. 또한 용해공정 중 용탕표면의 산화에 의해 발생되는 슬랙(slag)은 모합금의 합금 조성을 변화하게 하기 때문에 슬랙반응을 최소화 하며, 불순물을 최대한 제거할 수 있는 공정조건 최적화가 필수적으로 요구된다. |
M. Nanjo, "Urban Mine, New Resources for the Year 2000 and Beyond", Bulletin of the Research Institute of Mineral Dressing and Metallurgy, Tohoku University, 43(2), 239 (1988).
H. S. Jung, "Potential Value Evaluation of The Rare Metal in Urban mine", Issue paper, Samsung Economic Research Institute (2011).
J. P. Hong, J. Huh, S. Y. Cha, and K. H. Ha, "The Electric Equipment and Magnetic Materials", The Transac. Korean Ins. Electric. Eng., 55(9), 45 (2006).
C. J. Yang, "The Tehcnology Development Trend of Magnetic Materials", J. Korean Inst. Electr. Electron. Mater. Eng., 13(11), 1 (2000).
Y. D. Shin, J. -T. Song, "Research Trend and Development of Hard Magnetic Materials", J. Korean Inst. Electr. Electron. Mater. Eng.,9(1), 93 (1996).
W. S. Hong, S. H. Kim, J. Y. Park, C. M. Oh, W. S. Lee, S. G. Kim, S. J. Han, G. T. Shim, and H. J. Kim, "Manufacturing Technology for Tape Casting and Soft Magnetic Powder Using by Recycling Scrap of Fe-Si Electrical Sheet", J. Microelectron. Packag. Soc., 23(2), 11 (2016).
ASM, "ASM Handbook Volume 9: Metallography and Microstructures", ASM International, 9, 692, OH (USA) (1978).
C. J. Yang, "The Tehcnology Development Trend of Magnetic Materials", J. Korean Inst. Electr. Electron. Mater. Eng., 13(11), 1 (2000).
Y. D. Shin, and J. -T. Song, "Research Trend and Development of Hard Magnetic Materials", J. Korean Inst. Electr. Electron. Mater. Eng.,9(1), 93 (1996).
E. F. Kneller, and R. Hawig, "The exchange-spring magnet: a new material principle for permanent magnets", IEEE Trans. Magn., 27, 3588 (1991).
H. J. Fecht, E. Hellstern, Z. Fu, and W. L. Johnson, "Nanocrystalline metals prepared by high-energy ball milling", Metal. Trans., 21, 2333 (1990).
J. K. Lee, J. H. Yoo, M. J. Yoo, W. S. Lee, "Improving Stability and Characteristic of Circuit and Structure with the Ceramic Process Variable of Dualband Antenna Switch Module", J. Microelectron. Packag. Soc., 12(2), 105 (2005).
J. Eckert, and L. Schultz, "Glass formation and extended solubilities in mechanically alloyed cobalt-transition metal alloys", J. Less-Common Metals, 166, 293 (1990).
U. Mizutani, and C. H. Lee, "Effect of mechanical alloying beyond the completion of glass formation for Ni-Zr alloy powders", J. Mater. Sci., 25, 399 (1990).
R. B. Schwarz and W. L. Johnson, "Formation of an amorphous alloy by solid state reaction of the pure polycrystalline metals", Phys. Rev. Lett., 51, 415 (1983).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.