$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

A multi-objective optimization model for determining the building design and occupant behaviors based on energy, economic, and environmental performance

Energy : technologies, resources, reserves, demands, impact, conservation, management, policy, v.174, 2019년, pp.823 - 834  

Hong, Taehoon (Yonsei University) ,  Kim, Jimin ,  Lee, Minhyun

Abstract AI-Helper 아이콘AI-Helper

Abstract Buildings are becoming considerably more energy-efficient and thus achieving greater thermal comfort. This study was conducted to develop an optimization model that simultaneously takes into consideration the occupants' thermal comfort, thermal energy consumption, and life cycle economic-e...

주제어

참고문헌 (57)

  1. Standard ASHRAE 55 2010 Thermal environmental conditions for human occupancy 

  2. Energy Build Juan 42 3 290 2010 10.1016/j.enbuild.2009.09.006 A hybrid decision support system for sustainable office building renovation and energy performance improvement 

  3. Ministry of Land, Transport, and Maritime Affairs (MLTM) 2010 Standard for the design and performance evaluation of residential green buildings 

  4. Ministry of Land, Transport, and Maritime Affairs (MLTM) 2012 Design guidelines for energy efficient buildings 

  5. Seoul Metropolitan City 2011 Green design guidelines for office buildings and residential buildings in Seoul 

  6. Incheon Metropolitan City 2010 Green building design guideline for low carbon green growth in Incheon 

  7. Appl Energy Stazi 134 176 2014 10.1016/j.apenergy.2014.08.023 Energy, comfort and environmental assessment of different building envelope techniques in a Mediterranean climate with a hot dry summer 

  8. Build Environ Buratti 59 482 2013 10.1016/j.buildenv.2012.09.015 Unsteady simulation of energy performance and thermal comfort in non-residential buildings 

  9. Build Environ Kang 45 9 1914 2010 10.1016/j.buildenv.2010.02.020 Effect of MRT variation on the energy consumption in a PMV-controlled office 

  10. Energy Build Gratia 36 11 1139 2004 10.1016/j.enbuild.2004.05.004 Natural cooling strategies efficiency in an office building with a double-skin facade 

  11. Energy Build Kim 43 12 3436 2011 10.1016/j.enbuild.2011.09.006 A comparative life cycle assessment of a transparent composite facade system and a glass curtain wall system 

  12. Energy Build Citherlet 32 3 225 2000 10.1016/S0378-7788(98)00073-5 Window and advanced glazing systems life cycle assessment 

  13. Build Environ Hwang 46 4 824 2011 10.1016/j.buildenv.2010.10.009 Building envelope regulations on thermal comfort in glass facade buildings and energy-saving potential for PMV-based comfort control 

  14. Energy Build Penna 95 57 2015 10.1016/j.enbuild.2014.11.003 Multi-objectives optimization of energy efficiency measures in existing buildings 

  15. Appl Energy Delgarm 170 293 2016 10.1016/j.apenergy.2016.02.141 Multi-objective optimization of the building energy performance: a simulation-based approach by means of particle swarm optimization (PSO) 

  16. Karaguzel 111 2014 Building simulation Coupling of whole-building energy simulation and multi-dimensional numerical optimization for minimizing the life cycle costs of office buildings 

  17. Build Environ Wang 40 11 1512 2005 10.1016/j.buildenv.2004.11.017 Applying multi-objective genetic algorithms in green building design optimization 

  18. Energy Jie 159 1132 2018 10.1016/j.energy.2018.06.179 Optimizing the insulation thickness of walls and roofs of existing buildings based on primary energy consumption, global cost and pollutant emissions 

  19. Energy Harkouss 165 591 2018 10.1016/j.energy.2018.09.019 Passive design optimization of low energy buildings in different climates 

  20. Energy Kerdan 128 244 2017 10.1016/j.energy.2017.03.142 A comparison of an energy/economic-based against an exergoeconomic-based multi-objective optimisation for low carbon building energy design 

  21. Energy Chen 172 1 2019 10.1016/j.energy.2019.01.112 Energy optimization of high-rise commercial buildings integrated with photovoltaic facades in urban context 

  22. Energy Build Han 86 288 2015 10.1016/j.enbuild.2014.10.028 Different modeling strategies of infiltration rates for an office building to improve accuracy of building energy simulations 

  23. Energy Build Li 82 1 2014 10.1016/j.enbuild.2014.07.021 Building energy consumption on-line forecasting using physics based system identification 

  24. Energy Build Raftery 43 9 2356 2011 10.1016/j.enbuild.2011.05.020 Calibrating whole building energy models: an evidence-based methodology 

  25. Nguyen 2012 Proceedings of the 28th international PLEA conference, 7 Nov Optimum design of low-cost housing in developing countries using nonsmooth simulation-based optimization 

  26. Energy Build Rackes 75 272 2014 10.1016/j.enbuild.2014.02.024 Using multiobjective optimizations to discover dynamic building ventilation strategies that can improve indoor air quality and reduce energy use 

  27. Energy Convers Manag Lu 79 525 2014 10.1016/j.enconman.2013.12.051 Energy quality management for building clusters and districts (BCDs) through multi-objective optimization 

  28. Build Environ Magnier 45 3 739 2010 10.1016/j.buildenv.2009.08.016 Multiobjective optimization of building design using TRNSYS simulations, genetic algorithm, and Artificial Neural Network 

  29. Energy Build Zhang 85 126 2014 10.1016/j.enbuild.2014.09.032 Dynamic optimization based integrated operation strategy design for passive cooling ventilation and active building air conditioning 

  30. Energy Mostavi 121 606 2017 10.1016/j.energy.2017.01.049 Development of a new methodology to optimize building life cycle cost, environmental impacts, and occupant satisfaction 

  31. Energy He 170 1261 2019 10.1016/j.energy.2018.12.182 A quantity-quality-based optimization method for indoor thermal environment design 

  32. Energy Reynolds 151 729 2018 10.1016/j.energy.2018.03.113 A zone-level, building energy optimisation combining an artificial neural network, a genetic algorithm, and model predictive control 

  33. Energy Iturriaga 160 1101 2018 10.1016/j.energy.2018.07.023 Optimal renovation of buildings towards the nearly Zero Energy Building standard 

  34. Appl Energy Kim 204 1431 2017 10.1016/j.apenergy.2017.05.017 Establishment of an optimal occupant behavior considering the energy consumption and indoor environmental quality by region 

  35. Energy Kim 102 416 2016 10.1016/j.energy.2016.02.104 An integrated multi-objective optimization model for determining the optimal solution in the solar thermal system 

  36. Appl Energy Kim 169 682 2016 10.1016/j.apenergy.2016.02.032 An optimization model for selecting the optimal green systems by considering the thermal comfort and energy consumption 

  37. Renew Sustain Energy Rev Koo 57 822 2016 10.1016/j.rser.2015.12.205 An integrated multi-objective optimization model for determining the optimal solution in implementing the rooftop photovoltaic system 

  38. Renew Sustain Energy Rev Koo 49 410 2015 10.1016/j.rser.2015.04.120 An integrated multi-objective optimization model for establishing the low-carbon scenario 2020 to achieve the national carbon emissions reduction target for residential buildings 

  39. 2 2012 International energy conservation Code 

  40. ISO-EN 7730 1995 Moderate thermal environments-determination of the PMV and PPD indices and specification of the conditions for thermal comfort 

  41. Standard EN 15251 15251 2007 Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics 

  42. International Standard Organization 1997 ISO 14040: environmental management-life cycle assessment-principles and framework 

  43. Energies Hong 6 9 4352 2013 10.3390/en6094352 Assessment of seasonal energy efficiency strategies of a double skin facade in a monsoon climate region 

  44. Ministry of Land, Infrastructure and Transportation, Green remodeling business, Available at: http://www.molit.go.kr/USR/WPGE0201/m_35905/DTL.jsp (November 10, 2017). 

  45. Seoul Metropolitan Office of Education, Information open. Available at: http://open.sen.go.kr/infoopen/girok/infoOutList.do (November 10, 2017). 

  46. Ministry of Government Legislation, School health law enforcement regulations. Available at: http://www.law.go.kr/LSW/lsInfoP.do?lsiSeq=88324#0000 (November 10, 2017). 

  47. Build Environ Verheyen 46 5 1195 2011 10.1016/j.buildenv.2010.12.014 Thermal comfort of patients: objective and subjective measurements in patient rooms of a Belgian healthcare facility 

  48. Bank of Korea Economic Statistics System; http://ww.bok.or.kr (November 10, 2017). 

  49. Korea Statistical Information Service (KOSIS); http://kosis.kr/(November 10, 2017). 

  50. Environ Impact Assess Rev Kim 54 9 2015 10.1016/j.eiar.2015.04.005 A program-level management system for the life cycle environmental and economic assessment of complex building projects 

  51. J Clean Prod Jeong 107 538 2015 10.1016/j.jclepro.2014.01.027 A model for predicting the environmental impacts of educational facilities in the project planning phase 

  52. IEEE Trans Evol Comput Antonio 2017 Coevolutionary multi-objective evolutionary algorithms: a survey of the state-of-the-art 

  53. Appl Soft Comput Gong 34 286 2015 10.1016/j.asoc.2015.04.061 Distributed evolutionary algorithms and their models: a survey of the state-of-the-art 

  54. Swarm Evol Comput Zhou 1 1 32 2011 10.1016/j.swevo.2011.03.001 Multiobjective evolutionary algorithms: a survey of the state of the art 

  55. Hong 2015 International conference on construction engineering and project management (ICCEPM 2015), 11-14 Oct A comparison of three multi-objective evolutionary algorithms for optimal building design 

  56. Python 1 2009 Python (programming language) 1 CPython 13 Python software foundation 15 

  57. Roeva 2013 2013 federated conference on computer science and information systems (FedCSIS), 8-11 Sep Influence of the population size on the genetic algorithm performance in case of cultivation process modelling 

LOADING...

관련 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로