$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

제조시스템공학 40년-정리와 전망
Review and Perspectives on the Research and Industrial Applications of Manufacturing Systems Engineering in Korea for 40 Years 원문보기

대한산업공학회지 = Journal of the Korean Institute of Industrial Engineers, v.40 no.6, 2014년, pp.555 - 567  

최병규 (KAIST 산업 및 시스템공학과) ,  한관희 (경상대학교 산업시스템공학부) ,  전차수 (경상대학교 산업시스템공학부) ,  이철수 (서강대학교 기계공학과) ,  박상철 (아주대학교 산업공학과)

Abstract ▼ AI-Helper 아이콘AI-Helper

Over 40 years, the domestic manufacturing industry of Korea played the vital role in creating national wealth, employment and innovation in its economy. In 2011, industrial products made up 99.7 percent of exports, and formed 31.2 percent of GDP. Given those facts, the research of manufacturing syst...

주제어

#Manufacturing Systems Engineering   #Smart Factory   #CAD/CAM   #Vitrual Manufacturing System   #Computer-Based Planning and Scheduling   #Automation  

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 본 논문에서는 대한산업공학회 창립 40주년을 맞이하여 국내 제조시스템공학 분야에서 지난 40년간 이루어진 우리나라 산업공학계의 학술적인 연구 내용과 실무적인 적용을 정리해 보고 앞으로의 전망을 논의해보고자 하며, 논문의 구성은 다음과 같다. 제 2장에서는 제조시스템공학 분야의 세계적인 흐름을 간단하게 설명하고, 제 3장에서는 해당 분야의 지난 40년간의 국내 학술 연구 동향을 조사하여 정리하였으며, 제 4장에서는 해당 분야 연구 성과의 국내 산업체 활용 현황에 관해 정리한다.
  • 지난 40년간 산업공학 전공 연구자들의 심도 있는 제조 생산성 향상을 위한 연구는 급속한 산업화 과정에서 우리나라 경쟁력 향상에 커다란 기여를 하였는데, 이러한 제조시스템공학 분야의 국내 학술 연구 동향을 파악하기 위해 본 논문에서는 대한산업공학회 소속 연구자들의 연구 발표 내용을 조사 분석하였다. 조사 대상 기간은 처음으로 이 분야의 논문이 발표된 1983년부터 2014년 7월까지이며 다음 논문집에 게재된 논문중 제조시스템공학 분야에 속하는 논문을 대상으로 하였다: (1) 대한산업공학회지, (2) 산업공학지(IE interfaces), (3) 한국 CAD/CAM 학회논문집에서 현재 산업공학과 소속이거나 산업 공학 출신인 저자의 논문, (4) 산업공학과 소속 주요 연구자들의 국내외 논문(Scopus 검색).
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
제조 시스템공학의 목표는 무엇인가? 위에서 언급한 바와 같이 국내 제조가 국가 경제에서 차지 하는 비중에 비추어 볼 때, 제조의 효율화를 목표로 하는 제조 시스템공학(Manufacturing Systems Engineering) 분야의 연구와 연구 결과의 산업계 활용은 국가 경쟁력 향상에 매우 중요하다 하겠다. 영어권에서 Manufacturing이라는 용어가 처음 사용된 시기는 1560년대인데, 이때는 ‘손(manus)으로 만들다(factus)’는 의미로 사용되었으며 산업 혁명 시기를 거치면서 근대적 공장이 생기고 그 이후 제조의 개념에 많은 변화가 발생하였다.
국내 제조(업)의 현황은 어떠한가? 국내 제조(업)은 지난 40여 년간 국부와 고용 및 혁신 창출의 원천 역할을 수행해왔으며, 2011년 기준으로 수출 품목의 99.6%가 공산품이고, 우리나라 GDP의 31.2%를 제조업이 차지하고 있다. 참고로 주요 국가의 제조업의 GDP 비중은 일본의 경우 19.
새로운 미래 국가 성장 전략을 수립 및 이를 구현하고자하는 노력의 예는 무엇이 있는가? 급변하는 세계 경제 환경 속에서 생존하기 위해 최근 들어 세계 각국은 새로운 미래 국가 성장 전략을 수립하고 이를 구현하고자 노력을 경주하고 있다. 예를 들면, 내수시장이 적은 이스라엘은 중소형 벤처를 창업한 후 이를 나스닥에 등록하고 M&A를 통하여 부가가치를 창출하는 벤처 중심의 창조 경제 전략을 수립하였고, 문화와 금융에 전통이 있는 영국은 서비스업에 예술적이고 감성적인 창의성을 가미하여 경제 체계를 개편하고자 하는 서비스 중심의 경제 성장 전략을 수립하였다. 제조 분야에 강점을 가진 독일에서는 2010년에 이미 ‘하이 테크 2020’을 통해 국가 기술 혁신 전략을 제시하였으며, 그 중 생산 기술 분야에서는 비교 우위에 있는 첨단 제조업에 ICT (Information and Communication Technology)를 융합하여 산업구조의 변화를 유도하는 ‘Industry 4.0’ 전략을 발표하고 이를 적극 추진 중에 있다.
질의응답 정보가 도움이 되었나요?

참고문헌 (115)

  1. Bae, J. U. and Kim, K. J. (1996), A Development Tool for AGVS Controller using Simulation, IE interfaces, 9(1), 25-40. 

  2. Cho, K. K., Lee, S. H., and Ahn, J. H. (1999), Automated welding operation planning system for block assembly in shipbuilding, International Journal of Production Economics, 60, 203-209. 

    상세보기 crossref

  3. Cho, Y. H., Han, K. H., and Choi, S. H. (2010), Systematic Embedded Subsystem Development Methodology for POP System, J. of The Korean Institute of Industrial Engineers, 23(1), 35-47. 

  4. Choi, B. K. (1985), STOPP : an approach to CAD/CAM integration, Computer-Aided Design, 17(4), 162-168. 

    상세보기 crossref

  5. Choi, B. K., Jung, J. Y., and Kim, D. W. (1985), Development of a Graphic Simulation Modeller for Robot Welding Process Planning, J. of The Korean Institute of Industrial Engineers, 11(1), 21-32. 

  6. Choi, B. K., Lee, C. S., Hwang, J. S., and Jun, C. S. (1988), Compound surface modelling and machining, Computer-Aided Design, 20(3), 127-136. 

    상세보기 crossref

  7. Choi, B. K. and Jun, C. S. (1989), Ball-end cutter interference avoidance in NC machining of sculptured surfaces, Computer-Aided Design, 21(6), 371-378. 

    상세보기 crossref

  8. Choi, B. K. and Ju, S. Y. (1989), Constant-radius blending in surface modelling, Computer-Aided Design, 21(4), 213-220. 

    상세보기 crossref

  9. Choi, B. K. and Lee, C. S. (1990), Sweep surfaces modelling via coordinate transformation and blending, Computer-Aided Design, 22(2), 87-96. 

    상세보기 crossref

  10. Choi, B. K., Park, J. W., and Jun, C. S. (1993), Cutter-location data optimization in 5-axis surface machining, Computer-Aided Design, 25(6), 377-386. 

    상세보기 crossref

  11. Choi, B. K., Chung, Y. C., Park, J. W., and Kim, D. H. (1994), Unified CAM-system architecture for die and mold manufacturing, Computer-Aided Design, 26(3), 235-243. 

    상세보기 crossref

  12. Choi, B. K. and Chung, Y. C. (1995), Machining Simulation and NC-code Verification Using Z-map, IE interfaces, 8(3), 155-169. 

  13. Choi, B. K. and Han, K. H. (1995), Job Resource relation-Net Modeling for the Simulation of FMS, IE interfaces, 8(3), 61-73. 

  14. Choi, B. K. Jun, C. S., Yoo, W. S., and Pyoun, Y. S. (1996a), CAD/CAM systems and CNC machining, SciTechmedia, Korea. 

  15. Choi, B. K., Han, K. H., and Park, T. Y. (1996b), Object-oriented graphical modeling of FMSs, International Journal of Flexible Manufacturing Systems, 8(2), 159-182. 

    상세보기 crossref

  16. Choi, B. K. and Kim, B. H. (1997), Die-cavity pocketing via cutting simulation, Computer Aided Design, 29(12), 837-846. 

    상세보기 crossref

  17. Choi, B. K. and Jerad, R. (1998), Sculptured Surface Machining-Theory and Applications, Kluwer Academic Publishers. 

  18. Choi, H. Y. and Jung, M. Y. (1992), Guide-Path Design for Automated Guided Vehicles, J. of The Korean Institute of Industrial Engineers, 18(1), 121-139. 

  19. Choi, J. H., Kim, J. G., Lee, D. H., and Choi, I. J. (1999), Development of the DNC System for SFC/POP, IE interfaces, 12(3), 374-381. 

  20. Choi, J. S. and Kim, D. W. (1996), Collision-Free Path Planning for Articulated Robots, J. of The Korean Institute of Industrial Engineers, 22(4), 579-588. 

  21. Choi, M. W., Han, S. T., Seo, J. H., Woo, J. H., Lee, C. J. and Choi, Y. R. (2005), Digital Manufacturing Strategy and Case study of Automotive General Assembly, Trans. the Society of CAD/CAM Engineers, 10(3), 199-209. 

  22. Choi, T. J. and Choi, B. K. (2011), Study on Automod Generating Emulation/Animation Model for Integrated Simulation of Production and Material Handling Systems, Proceeding of Autumn Annual Conference of The Korean Institute of Industrial Engineers, 178-182. 

  23. Chu, W. S., Ahn, S. H., Kim, D. S., and Jun, C. S. (2004), MIMS : Web-based Micro Machining Service, Trans. the Society of CAD/CAM Engineers, 9(3), 246-252. 

  24. Chung, B. D. and Kim, K. S. (2002), A Study on Design of a Tandem AGV System with Multi-Load AGVs, IE interfaces, 15(1), 1-9. 

  25. Chung, Y. C. (1995), Cutting simulation and verification of NC data for unified CAM system for die and mold manufacturing, Ph.D. Thesis, Korea Advanced Institute of Science and Technology (KAIST). 

  26. Chung, Y. C. and Choi, B. K. (1996), Non-parametric Modeling of Cutter Swept Surfaces for Cutting Simulation, Trans. the Society of CAD/CAM Engineers, 1(1), 45-55. 

  27. Chung, Y. C. Park, J. W., Shin, H. Y., and Choi, B. K. (1998), Modeling the surface swept by a generalized cutter for NC verification, Computer-Aided Design, 30(8), 587-594. 

    상세보기 crossref

  28. Chung, Y. C. (2005), Tool-path Computing by Slicing Offset Triangles and Tracing Intersections, Trans. the Society of CAD/CAM Engineers, 10(6), 455-464. 

  29. Chung, J. W., Jang, J. J. Suh, J. D., Koo, P. H., and Choung, Y. I. (2005), A Scheduling with semiconductor FAB Manufacturing integrated by lots balance and facility assignment, Proceeding of Autumn Annual Conference of The Korean Institute of Industrial Engineers, 931-938. 

  30. Do, N. C. (2013), An Information System Architecture for Extracting Key Performance Indicators from PDM Databases, J. of The Korean Institute of Industrial Engineers, 39(1), 1-9. 

    원문보기 상세보기 crossref

  31. Han, K. H. (1998), New Directions in the CIM System Development-Virtual Manufacturing, IE Interfaces, 11(3), 219-225. 

  32. Han, K. H. and Park, C. W. (2004), A QFD-Based Requirements Analysis for the Development of Integrated Design and Manufacturing Information System, IE Interfaces, 17(3), 261-268. 

  33. Han, K. H., Park, C. W. Ok, J. S., and Kim, K. S. (2005), The Development of a Shop Floor-Centered Information System for the Integration of Design and Manufacturing Data, Trans. the Society of CAD/CAM Engineers, 10(4), 237-243. 

  34. Han, K. H. and Park, J. W. (2009), UML-based PLC Ladder Logic Design and Automatic Generation of Ladder Code, Trans. the Society of CAD/CAM Engineers, 14(1), 50-59. 

  35. Huh, J. H., Kim, Y. L., and Jun, C. S. (2006) Contour Parallel Offset and Tool-Path Linking Algorithm for Pocketing Using Pairwise Intersection Approach, Trans. the Society of CAD/CAM Engineers, 11(5), 375-383. 

  36. Hwang, H. S. (1996), A Comparative Study of FMS Performance Evaluation Modeling Using FACTOR/AIM, IE interfaces, 9(2), 191- 202. 

    원문보기 상세보기

  37. Joung, S. H. and Byun, J. H. (2002), An Experimental Study on Selecting the Diameter of Probe Stylus of a Coordinate Measuring Machine in Measuring the Edge Profile of High Pressure Compressor, IE interfaces, 15(4), 432-438. 

  38. Jun, C. S. (1985), NC Machining of Sculptured Surface from 3D Measuring Data, M. S. Thesis, Korea Advanced Institute of Science and Technology(KAIST). 

  39. Jun, C. S. (1993), Cutter Interference Avoidance in NC Machining of Compound Surfaces, J. of The Korean Institute of Industrial Engineers, 19(3), 139-154. 

  40. Jung, E. K., Jeon, T. B., and Kim, Y. H. (1993), Flexibility Measurement Model for Cellular Manufacturing Systems, J. of The Korean Institute of Industrial Engineers, 19(3), 91-102. 

  41. Jung, Y. C. (2013), Tool-path Generation for a Robotic Skull Drilling System, Trans. the Society of CAD/CAM Engineers, 18(4), 243-249. 

    원문보기 상세보기 crossref

  42. Kagermann, H. et al. (2013), Final Report-Securing the Future of German Manufacturing Industry Recommendations for Implementing the Strategic Initiative Industrie 4.0, Industrie 4.0 Working Group, Germany. 

  43. Kang, J. K. and Suh, S. H. (1995), Determining Machinability and Setup Orientation for Five-axis NC Machining of Free Surfaces, J. of The Korean Institute of Industrial Engineers, 21(1), 67-84. 

  44. Kang, J. G., Lee, H. S., Oh, K. J., and Jung, J. Y. (2000), Optimal Design and Die Manufacturing of an Axial Fan for Cooling Towers, IE interfaces, 13(4), 717-724. 

  45. Kim, B. H., Back, J. Y., and Yi, I. L. (2005), A Support System for Searching Robust Injection Molding Condition, IE interfaces, 18(1), 73-81. 

  46. Kim, B. K. and Park, J. Y. (2002), An Algorithm for Reducing the Tool Retraction Length in Zigzag Pocket Machining, J. of The Korean Institute of Industrial Engineers, 28(2), 128-138. 

  47. Kim, G. Y., Jin, Y. E., Noh, S. D., Choi, S. S., Jo, Y. J., and Choi, S. O. (2011), Implementation Strategy and Effect Analysis of MES for a Small and Medium PCB Production Company based on BPR Methodology, J. of The Korean Institute of Industrial Engineers, 24(3), 231-24. 

    원문보기 상세보기 crossref

  48. Kim, J. H. (2014), VIP Report, Hyundae Research Institute, Seoul, Korea. 

  49. Kim, K. H. (1993), Correlated Assignment Strategy in Miniload AS/RS, J. of The Korean Institute of Industrial Engineers, 19(1), 19-29. 

  50. Kim, Y. J. and Yang, Y. M. (2003), Development of Web Based Machining Tool Data System Using XML(eXtensible Markup Language), IE interfaces, 16(1), 8-15. 

  51. Kim, Y. K., Kim, J. Y., and Shin, K. S. (2004), The Integration of FMS Process Planning and Scheduling Using an Asymmetric Multi-leveled Symbiotic Evolutionary Algorithm, J. of The Korean Institute of Industrial Engineers, 30(2), 130-145. 

  52. Ko, K. H., Seo, J. C., and Choi, B. K. (2006) Automatic Feedrate Adjustment for 2D Profire Milling, Trans. the Society of CAD/CAM Engineers, 5(2), 175-183. 

  53. Ko, M. S., Koo, L. J., Kwak, J. G., Hong, S. H., Wang, G. N., and Park, S. C. (2009), A Study of PLC Simulation for Automobile Panel AS/RS, J. of The Korean Institute of Industrial Engineers, 18(3), 1-11. 

  54. Ko, M. S., Shin, H. S., Hong, S. H., Park, S. C., and Wang, G. N. (2011), A Template Based Process Modeling Methodology for Control Simulation, Trans. the Society of CAD/CAM Engineers, 16(5), 351-360. 

  55. Ko, M. S., Cheon, S. U. and Park, S. C. (2013), A Method for Generating a Plant Model Based on Log Data for Control Level Simulation, Trans. of the Society of CAD/CAM Engineers, 18(1), 21-27. 

    원문보기 상세보기 crossref

  56. Koo, L. J., Yeo, S. J., Lee, K. G., Hong, S. H., Park, C. M., Park, S. C., and Wang, G. N. (2008), The Process Analysis and Application Methods for PLC Code Programming, IE interfaces, 21(3), 294-301. 

  57. Koo, L. J., Park, S. C., and Wang, G. N. (2009), A Study of Methodology for Applying Simulation to Car Body Assembly Line using I/O Model, Trans. the Society of CAD/CAM Engineers, 14(4), 225-233. 

  58. Lee, C. H., Wang, G. N., and Park, S. C. (2009), Design of a Vehicle Assembly Line Using PLC Simulation, Trans. the Society of CAD/CAM Engineers, 14(5), 323-329. 

  59. Lee, C. S. (1990), A Study on Sweep Surface Modeling, Ph.D. Thesis, KAIST. 

  60. Lee, C. S. and Bae, S. Y. (1994), Scheduling of Machining Shop Composed of Machining center and Multiple Pallets, IE interfaces, 7(2), 107-120. 

  61. Lee, C. S. (1994), Tool-Path Generation in NC Machining of Automobile Panel Die, J. of The Korean Society of Automotive Engineers, 2(5), 74-84. 

  62. Lee, C. S. (1996), Surface Modeling and 5-axis NC machining of Automobile Tire Model, J. of The Korean Institute of Industrial Engineers, 9(2), 2129-2141. 

  63. Lee, C. S. and Park, G. R. (1998), A 4-axis NC Lettering System for the Side-wall of the Automobile Tire, J. of The Korean Institute of Industrial Engineers, 11(2), 65-78. 

  64. Lee, C. S. and Park, G. R. (1999), Generation of 5-axis NC Data for Machining Turbine Blades by Controlling the Heel Angle, Trans. of the Society of CAD/CAM Engineers, 4(2), 110-120. 

  65. Lee, C. S., Park, G. R., and Kim, Y. H. (2000), Generating the Parting-Line, Parting-Surface and Core/Cavity for an Injection Mold by using Face-Edge Graph, IE interfaces, 13(4), 591-598. 

  66. Lee, C. S. and Lee, J. P. (2001), Calculating the Feedrate of 5-Axis NC Machining Data for the Constant Cutting Speed at a CL- point, Trans. the Society of CAD/CAM Engineers, 6(2), 69-77. 

  67. Lee, C. S., Heo, E. Y., Kim, J. M. and Kim, D. S. (2011), A Study Of The Efficient Nesting Considering Scrap Feature, Proceedings of the Society of CAD/CAM Engineers, 533-537. 

  68. Lee, C. S., Choi, I. H., Heo, E. Y., and Kim, J. M. (2012), A Method of Hole Pass-Through Evaluation for EDM Drilling, J. of The Korean Institute of Industrial Engineers, 38(3), 220-226. 

    원문보기 상세보기 crossref

  69. Lee, G. G. (1990), Buffer Sizing in FMS Environment through Transfer Pricing Mechanism, J. of The Korean Institute of Industrial Engineers, 16(2), 81-89. 

  70. Lee, K. B. and Kim, Y. M. (1996), Expert System for optimal cutting speed and feed rate selection, IE interfaces, 9(1), 1-10. 

  71. Lee, K. B., Ju, S. Y., and Wang, G. N. (1998), Determination of Machining Parameters for Two Dimensional Electrical Discharge Machining using Neural Networks, IE interfaces, 11(1), 145-153. 

  72. Lee, K. H., Kang, Y. S., and Lee, Y. H. (2012), Development of Manufacturing Ontology-based Quality Prediction Framework and System : Injection Molding Process, IE interfaces, 25(1), 40-51. 

    원문보기 상세보기 crossref

  73. Lee, M. K. (1995), Travel-Time Analysis for an Automated Mobile Racking System, J. of The Korean Institute of Industrial Engineers, 21(2), 195-206. 

  74. Lee, M. K. (2004), Travel Time Models of a Hybrid Automated Storage/Retrieval Module for Small and Medium-Sized Enterprises, IE Interfaces, 17, 52-61. 

  75. Lee, S. W. and Lee, J. J. (1995), Tool Management System for Machine Shop Floor, IE interfaces, 8(4), 191-200. 

  76. Lee, S. Y., Jeong, H. M., Ko, C. N., Lee, D. K., Jeong, S. B. and Kim, S. B. (2000), Development of hole machining system for Commercial Vehicle Side frame, Trans. the Society of CAD/CAM Engineers. 

  77. Lee, Y. H. and Kim, S. S. (1988), A Simulation Support System for Optimal Design of FMS, IE Interfaces, 1(2), 25-34. 

  78. Lee, Y. S., Hwang, H. J., Park, M. J., Jang, D. Y., kim, J. P. and Na, K. H. (2001), Development of Web-based Virtual System to Simulate Forging Operation, IE interfaces, 14(1), 1-8. 

  79. Lim, S. G. (1996), Expected Travel Time and Class Layout for Class-based Automated Storage/Retrieval Systems, J. of The Korean Institute of Industrial Engineers, 22(2), 179-188. 

  80. Mok, H. S., Kim, H. J., and Moon, K. S. (1997), Disassemblability of mechanical parts in automobile for recycling, Computers and Industrial Engineering, 33(3/4), 621-624. 

    상세보기 crossref

  81. Moon, S. H. and Han, M. H. (1996), Navigation Control for a Mobile Robot using a Camera, J. of The Korean Institute of Industrial Engineers, 22(2), 165-177. 

  82. Park, J. H., Chung, Y. C. and Choi, B. K. (1998), Precision Shape Modeling by Z-Map Model, J. of Korean Society for Precision Engineering, 15(11), 180-188. 

  83. Park, J. H. and Yoshida, A. (2009), A Simplified MES Implementation for Small-sized Manufacturing Industries with EXCEL VBA, J. of The Korean Institute of Industrial Engineers, 22(4), 302-311. 

  84. Park, J. C., Shin, H., and Choi, B. K. (2006), Elliptic Gabriel graph for finding neighbors in a point set and its application to normal vector estimation, Computer Aided Design, 38(6), 619-626. 

    상세보기 crossref

  85. Park, J. W. and Lee, J. G. (2002), CL-data Optimization of 5-axis Facemilling Via C-space and Effective-radius Map, Trans. the Society of CAD/CAM Engineers, 7(1), 34-41. 

  86. Park, S. C. and Choi, B. K. (2001), Uncut free pocketing tool-paths generation using pair-wise offset algorithm, Computer-Aided Design, 33(10), 739-746. 

    상세보기 crossref

  87. Park, S. C. and Park, T. J. (2006), Pencil Curve Computation for Clean-up Machining, Trans. the Society of CAD/CAM Engineers, 11(1), 20-26. 

  88. Park, S. C., Ko, M. S., Park, S. H., and Wang, G. N. (2009a), SOS-Net for Generation of PLC Program, Trans. the Society of CAD/CAM Engineers, 14(1), 60-68. 

  89. Park, S. C., Seong, K. Y., Han, K. H., Pyun, J. J., and Wang, G. N. (2009b), PLC Program Monitoring for Manufacturing Systems Using PLC Signal Time Difference, Trans. the Society of CAD/CAM Engineers, 14(3), 176-185. 

  90. Park, S. C., Lee, C. H., and Wang, G. N. (2009c), Design of a Vehicle Assembly Line Using PLC Simulation, Trans. the Society of CAD/CAM Engineers, 14(5), 323-329. 

  91. Park, T. Y., Han, K. H., and Choi, B. K. (1997), An object-oriented modelling framework for automated manufacturing system, International Journal of Computer Integrated Manufacturing, 10(5), 324-334. 

    상세보기 crossref

  92. Park, Y. J., Shin, M. S., and Ryu, K. Y. (2012), Development of Green-BOM to Manage Eco-friendly Information on Products and Manufacturing Processes, Trans. the Society of CAD/CAM Engineers, 17(6), 387-397. 

    원문보기 상세보기 crossref

  93. Pyoun, Y. S. and Choi, B. K. (1994), Quantifying the flexibility value in automated manufacturing systems, Journal of Manufacturing Systems, 13(2), 108-118. 

    상세보기 crossref

  94. Seo, Y. H. (1994), Integrated Manufacturing Systems Design : Integrated Approach to Process Plan Selection and AGV Guidepath Design, J. of The Korean Institute of Industrial Engineers, 20(3), 151-166. 

    원문보기 상세보기

  95. Seo, Y. H. and Choi, H. G. (2001), Machining Sequence Generation with Machining Times for Composite Features, Trans. the Society of CAD/CAM Engineers, 6(4), 244-253. 

  96. Shim, C. G. and Byun, J. H. (1996), A Study on the Evaluation of the Gear Measurement Capability of a 3 Dimensional Coordinate Measuring Machine, IE interfaces, 12(2), 180-192. 

  97. Shin, D. O., Kim, Y. J., and Ko, S. L. (2000), Development of Tool and Optimal Cutting Condition Selection Program, J. of The Korean Institute of Industrial Engineers, 26(2), 165-170. 

  98. Shin, H. Y., Jeong, H. M., and Kwak, Y. S. (1995), Machining of 2D Parametric Spline Using Cutter Radius Compensation, J. of The Korean Institute of Industrial Engineers, 8(3), 

  99. Shin, S. J., Suh, S. H., and Stroud, I. (2007), Reincarnation of G-code based part programs into STEP-NC for turning applications, Computer Aided Design, 49(1), 1-16, 133-139. 

  100. Son, H. S., Lee, H. Y., and Choi, B. K. (2009), Capacity-Filtering Algorithm based Release Planning Method for TFT-LCD Fab, J. of The Korean Institute of Industrial Engineers, 22(1), 1-9. 

  101. Song, E. H., Gu, S. J., and Choi, B. K. (2010), Event Graph Modeling of Electronics Fab with Uni-inline Cells, Proceeding of Annual Conference of The Korean Institute of Industrial Engineers, 397-401. 

  102. Song, E. H., Choi, B. K., and Park, B. (2012), Event graph modeling of a homogeneous job shop with bi-inline cells, Simulation Modelling Practice and Theory, 20(1), 1-11. 

    상세보기 crossref

  103. Suh, J. D. and Jang, J. J. (2000), An AGV control policy reflecting the current and future status information of a semiconductor and LCD production shop, J. of The Korean Institute of Industrial Engineers, 26(3), 238-248. 

  104. Suh, S. H., Noh, S. K., and Choi, Y. J. (1995), A PC-based retrofitting toward CAD/CAM/CNC integration, Computers and Industrial Engineering, 28(1), 133-146. 

    상세보기 crossref

  105. Suh, S. H., Lee, E. S., and Jung, S. Y. (1998), Error modelling and measurement for the rotary table of five-axis machine tools, International Journal of Advanced Manufacturing Technology, 14(9), 656-663. 

    상세보기 crossref

  106. Suh, S. H., Lee, E. S., Kim, H. C., Cho, J. H. (2002), Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC, International Journal of Machine Tools and Manufacture, 42(3), 335-342. 

    상세보기 crossref

  107. Suh, S. H., Shin, S. J., Yoon, J. S., and Um, J. M. (2008), UbiDM : A new paradigm for product design and manufacturing via ubiquitous computing technology, International Journal of Computer Integrated Manufacturing, 21(5), 540-549. 

    상세보기 crossref

  108. Wang, G. N., Koo, L. J., Yeo, S. J., Lee, K. G., Hong, S. H., Park, C. M., and Park, S. C. (2008), The Process Analysis and Application Methods for PLC Code Programming, J. of The Korean Institute of Industrial Engineers, 21(3), 294-301. 

  109. Yang, D. Y. and Choi, B. K. (1989), Study of Precision Materials Processing and its Automation, National Research Foundation of Korea, KOSEF 860311. 

  110. Yang, K. R., Ahn, E. K., Chung, Y. H., Kim, B. H., Seo, J. C., and Park, S. C. (2013a), Bottleneck detection using productivity achievement ratio in semiconductor production line,, Proceeding of the Society of CAD/CAM Engineers, 444-445. 

  111. Yang, K. R., Ahn, E. K., Chung, Y. H., Kim, B. H., Seo, J. C., and Park, S. C. (2013b), Bottleneck detection using Backward planning, Proceeding of Spring Annual Conference of The Korean Institute of Industrial Engineers, 1779-1787. 

  112. Yoo, W. S., Jeong, H. M., and Cheon, S. U. (1999), Modeling of blend surfaces by NURBS Patches, Proceeding of Autumn Annual Conference of The Korean Institute of Industrial Engineers. 

  113. Yoo, W. S. and Jeong, H. M. (2000), Modeling of blend surfaces by Non Uniform B-spline surface patches, J. of The Korean Institute of Industrial Engineers, 26(2), 95-100. 

  114. Yoo, W. S. and Jeong, H. M. (2001), Development of the Wire EDM CAM System Considering a Variable Taper Wire-cut and an Unmanned Wire EDM during the Night, Trans. the Society of CAD/CAM Engineers, 6(3) 206-214. 

  115. Yoon, J. S., Shin, S. J., and Suh, S. H. (2012), A conceptual framework for the ubiquitous factory, International Journal of Production Research, 50(8), 2174-2189. 

    상세보기 crossref

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

FREE

Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로