$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

석유계 잔사유 기반 음극재 제조 및 그 전기화학적 특성
Fabrication and the Electrochemical Characteristics of Petroleum Residue-Based Anode Materials 원문보기

공업화학 = Applied chemistry for engineering, v.33 no.5, 2022년, pp.496 - 501  

김대섭 (충남대학교 응용화학공학과) ,  임채훈 (충남대학교 응용화학공학과) ,  김석진 (충남대학교 응용화학공학과) ,  이영석 (충남대학교 응용화학공학과)

초록
AI-Helper 아이콘AI-Helper

본 연구에서는 석유 정제 부산물인 석유계 잔사유를 이용하여 리튬이차전지용 음극재를 제조하였다. 석유계 잔사유 중 열분해 연료유(pyrolysis fuel oil, PFO), 유동접촉분해 데칸트 오일(fluidized catalyst cracking-decant oil, FCC-DO), 감압잔사유(vacuum residue, VR)를 탄소 전구체로 사용하였다. MALDI-TOF, 원소분석(EA)을 통하여 석유계 잔사유의 물리화학적 특징을 확인하였고, 잔사유로부터 제조된 음극재는 XRD, Raman 등의 분석을 통해 그 구조적 특징을 평가하였다. VR은 PFO 및 FCC-DO에 비하여 광범위한 분자량 분포와 많은 양의 불순물을 함유하는 것을 확인할 수 있었고, PFO와 FCC-DO는 거의 유사한 물리화학적 특징을 나타내었다. XRD 분석결과로부터 탄화된 PFO와 FCC-DO는 유사한 d002값을 나타내었다. 그러나 Lc 및 La값에서는 FCC-DO가 PFO보다 더 발달된 층상구조를 갖는 것으로 확인되었다. 또한, 전기화학적 특성 평가에서는 FCC-DO가 가장 우수한 사이클 특성을 나타내었다. 이러한 석유계 잔사유의 물리화학적, 전기화학적 결과로 미루어 보아 FCC-DO가 PFO와 VR보다 더 우수한 리튬이차전지용 탄소 전구체인 것으로 사료된다.

Abstract AI-Helper 아이콘AI-Helper

In this study, an anode material for lithium secondary batteries was manufactured using petroleum-based residual oil, which is a petroleum refining by-product. Among petroleum-based residual oils, pyrolysis fuel oil (PFO), fluidized catalyst cracking-decant oil (FCC-DO), and vacuum residue (VR) were...

주제어

표/그림 (6)

참고문헌 (32)

  1. M.-S. Park, Y. Ko, M.-J. Jung, and Y.-S. Lee, Stabilization of pitch-based carbon fibers accompanying electron beam irradiation and their mechanical properties, Carbon Lett., 16, 121-126 (2015). 

  2. J. H. Cho, and B. C. Bai, Effects of pressurized PFO-based pitch coking conditions on coke yield and graphite conductivity, Carbon Lett., 31, 921-927 (2021). 

  3. D. S. Kim, K.H. Kim, C. Lim, and Y.-S. Lee, Carbon-coated SiOx anode materials via PVD and pyrolyzed fuel oil to achieve lithium-ion batteries with high cycling stability, Carbon Lett., 32, 321-328 (2022). 

  4. J. G. Kim, J. H. Kim, B. C. Bai, Y. J. Choi, J. S. Im, T.-S. Bae, and Y.-S. Lee, Influence of kneading ratio on the blending interaction of coke aggregates on manufacturing a carbon block, Carbon Lett., 28, 24-30 (2018). 

  5. D. H. An, K. H. Kim, C. H. Lim, and Y.-S. Lee, Effect of kneading and carbonization temperature on the structure of the carbon block for thermally conductive bulk graphites, Carbon Lett., 31, 1357-1364 (2021). 

  6. B. C. Bai, J. G. Kim, J. H. Kim, C. W. Lee, Y.-S. Lee, and J. S. Im, Blending effect of pyrolyzed fuel oil and coal tar in pitch production for artificial graphite, Carbon Lett., 25, 78-83 (2018). 

  7. J. G. Kim, F. Liu, C.-W. Lee, Y.-S. Lee, and J. S. Im, Boron-doped carbon prepared from PFO as a lithium-ion battery anode, Solid State Sci., 34, 38-42 (2014). 

  8. J. H. Kim, J. G. Kim, K. B. Lee, and J. S. Im, Effects of pressure-controlled reaction and blending of PFO and FCC-DO for mesophase pitch, Carbon Lett., 29, 203-212 (2019). 

  9. J. G. Kim, J. H. Kim, J. S. Im, Y.-S. Lee, and T.-S. Bae, Empirical study of petroleum-based pitch production via pressureand temperature- controlled thermal reactions, J. Ind. Eng. Chem., 62, 176-184 (2018). 

  10. J. G. Kim, J. H. Kim, B.-J. Song, Y. P. Jeon, C. W. Lee, Y.-S. Lee, and J. S. Im, Characterization of pitch derived from pyrolyzed fuel oil using TLC-FID and MALDI-TOF, Fuel, 167, 25-30 (2016). 

  11. M. Noel and R. Santhanam, Electrochemistry of graphite intercalation compounds, J. Power Sources, 72, 53-65 (1998). 

  12. J. Shim and K. A. Striebel, Effect of electrode density on cycle performance and irreversible capacity loss for natural graphite anode in lithium-ion batteries, J. Power Sources, 119-121, 934-937 (2003). 

  13. H. Nozaki, K. Nagaoka, K. Hoshi, N. Ohta, and M. Inagaki, Carbon-coated graphite for anode of lithium ion rechargeable batteries: Carbon coating conditions and precursors, J. Power Sources, 194, 486-493 (2009). 

  14. K. S. Kim, J. U. Hwang, J. S. Im, J. D. Lee, J. H. Kim, and M. I. Kim, The effect of waste PET addition on PFO-based anode materials for improving the electric capacity in lithium-ion battery, Carbon Lett., 30, 545-553 (2020). 

  15. Y. Cheng, C. Fang, J. Su, R. Yu, and T. Li, Carbonization behavior and mesophase conversion kinetics of coal tar pitch using a low temperature molten salt method, J. Anal. Appl. Pyrolysis, 109, 90-97 (2014). 

  16. J.-S. Hwang, C.-H. Lee, K.-H. Cho, M.-S. Kim, C.-J. Kim, S.-K. Ryu, and B.-S. Rhee, Preparation of anisotropic/isotropic pitches from NCC-PFO, Korean J. Chem. Eng., 33, 551-558 (1995). 

  17. J.-Y. Jung, M.-S. Park, M. I. Kim, and Y.-S. Lee, Novel reforming of pyrolized fuel oil by electron beam radiation for pitch production, Carbon Lett., 15, 262-267 (2014). 

  18. M.-J. Jung, Y. Ko, and Y.-S. Lee, Synthesis of pitch from PFO, byproduct of naphtha cracking process using UV irradiation and AlCl 3 catalyst, Appl. Chem. Eng., 26, 224-228 (2015). 

  19. K. H. Kim, S. Lee, D. An, and Y.-S. Lee, Effect of β-resin of petroleum-based binder pitch on density of carbon block, Appl. Chem. Eng., 28, 432-436 (2017). 

  20. M.-J. Jung, J.-Y. Jung, D. Lee, and Y.-S. Lee, A new pitch reforming from pyrolysis fuel oil by UV irradiation, J. Ind. Eng. Chem., 22, 70-74 (2015). 

  21. J.-Y. Jung and Y.-S. Lee, Preparation of pitch from pyrolized fuel oil by electron beam radiation and its melt-electrospinning property, Carbon Lett., 15, 129-135 (2014). 

  22. S. W. Seo, J. H. Kim, Y.-S. Lee, and J. S. Im, Identification of synthesized pitch derived from pyrolyzed fuel oil (PFO) by pressure, Appl. Chem. Eng., 29, 652-656 (2018). 

  23. J. H. Cho, J. H. Kim, Y.-S. Lee, J. S. Im, and S. C. Kang, Preparation and Characterization of Pitch based Coke with Anisotropic Microstructure Derived from Pyrolysis Fuel Oil, Appl. Chem. Eng., 32, 640-646 (2021). 

  24. K. S. Kim, J. S. Im, J. D. Lee, J. H. Kim, and J. U. Hwang, Effects of Pitch Softening Point-based on Soft Carbon Anode for Initial Efficiency and Rate Performance, Appl. Chem. Eng., 30, 331-336 (2019). 

  25. J.-H. Kim, S. Lee, E. Jeong, and Y.-S. Lee, Fabrication and Characteristics of Mesophase Pitch-based Graphite Foams Prepared Using PVA-AAc Solution, Appl. Chem. Eng., 26, 706-713 (2015). 

  26. F. Tuinstra and J. L. Koenig, Raman spectrum of graphite, J. Chem. Phys., 53, 1126-1130 (1970). 

  27. S. Reich and C. Thomsen, Raman spectroscopy of graphite, Philos. Trans. Royal Soc. A, 362, 2271-2288 (2004). 

  28. J. U. Hwang and J. D. Lee, Electrochemical characteristics of PFO pitch anode prepared by chemical activation for lithium ion battery, Korean Chem. Eng. Res., 55, 307-312 (2017). 

  29. H. Y. Lee, and J. D. Lee, Electrochemical Performance on the H 3 BO 3 Treated Soft Carbon modified from PFO as Anode Material, Korean Chem. Eng. Res., 54, 746-752 (2016). 

  30. Jafaria, S. M., Khosravia, M. and Mollazadehb, M., Nanoporous Hard Carbon Microspheres as Anode Active Material of Lithium Ion Battery, Electrochim. Acta, 203, 9-20 (2016). 

  31. S. Alvin, H. S. Cahyadi, J. Hwang, W. Chang, S. K. Kwak, and J. Kim, Revealing the intercalation mechanisms of lithium, sodium, and potassium in hard carbon, Adv. Energy Mater., 10, 2000283 (2020). 

  32. N. A. Kaskhedikar and J. Maier, Lithium storage in carbon nanostructures, Adv. Mater., 21, 2664-2680 (2009). 

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로