참고문헌 (22)

1. Mater. Sci. Technol. Bamberger 2 410 1986 10.1179/mst.1986.2.4.410 Determination of heat transfer coefficients during water cooling of metals 

   상세보기

2. Appl. Math. Modell. Cleary 34-8 2018 2010 10.1016/j.apm.2009.10.015 Short shots and industrial case studies: understanding fluid flow and solidification in high pressure die casting 

   상세보기

3. J. Mater. Process. Technol. Dargusch 180 37 2006 10.1016/j.jmatprotec.2006.05.001 The influence of pressure during solidification of high pressure die cast aluminium telecommunications components 

   상세보기

4. Comput. Struct. Dokainish 32 6 1387 1989 10.1016/0045-7949(89)90314-3 A survey of direct time-integration methods in computational structural dynamics 

   상세보기

5. Metall. Mater. Trans. B Griffiths 31 2 285 2000 10.1007/s11663-000-0047-6 Model of the interfacial heat-transfer coefficient during unidirectional solidification of an aluminum alloy 

   상세보기

6. Int. J. Therm. Sci. Hamasaiid 49 365 2010 10.1016/j.ijthermalsci.2009.07.014 A predictive model for the evolution of the thermal conductance at the casting-die interfaces in high pressure die casting 

   상세보기

7. Mater. Sci. Eng. Laws A425 114 2006 10.1016/j.msea.2006.03.037 Effect of die-casting parameters on the production of high quality bulk metallic glass samples 

   상세보기

8. Kaufman 2004 American Foundry Society, Aluminum Alloy Castings: Properties, Processes, and Applications 

9. V. Kokot, P. Bernbeck, What is a good gating system? or quantifying quality but how?, in: Proceedings of XX MCWASP Conference, France, 2006, Paper no.: 179041. 

10. J. Mater. Process. Technol. Kong 201 629 2008 10.1016/j.jmatprotec.2007.11.250 Integrated optimization system for high pressure die casting processes 

    상세보기

11. Int. J. Adv. Manuf. Technol. Krimpenis 27 509 2006 10.1007/s00170-004-2218-0 Simulation-based selection of optimum pressure die-casting process parameters using neural nets and genetic algorithms 

    상세보기

12. J. Mater. Process. Technol. Kumar 182 1-3 152 2007 10.1016/j.jmatprotec.2006.07.024 Heat transfer and solidification behaviour of modified A357 alloy 

    상세보기

13. H.I. Laukli, C. Dørum, Modelling the deformation behaviour of hypoeutectic Al-Si die-castings, in: Proceedings of 3rd International Conference on High-Tech Die-Casting, 3 (57), Vicenza, Italia, 2006. 

14. Metals Handbook - Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2, ASM International, 10th ed., 1990. 

15. Metall. Mater. Trans. B Nishida 17 4 833 1986 10.1007/BF02657147 Air-gap formation process at the casting-mold interface and the heat transfer mechanism through the gap 

    상세보기

16. J. Mater. Process. Technol. Rai 203 72 2008 10.1016/j.jmatprotec.2007.10.011 An intelligent system for predicting HPDC process variables in interactive environment 

    상세보기

17. Raithby 1998 Handbook of Heat Transfer Natural convection 

18. A.B. Shapiro, Heat transfer in LS-DYNA, in: Proceedings of 4th European LS-DYNA Users Conference, Ulm, Germany, 2003: H-I01-08. 

19. N. Stander, M. Burger, X. Zhu, B. Maker, An optimization procedure for Springback compensation using LS-OPT, in: Proceedings of 7th International LS-DYNA Users Conference, 2002. 

20. Journal of International Science Tsoukalas 218 77 2004 A study of porosity formation in pressure die casting using the Taguchi approach 

21. Mater. Des. Tsoukalas 29 2027 2008 10.1016/j.matdes.2008.04.016 Optimization of porosity formation in AlSi9Cu3 pressure die castings using genetic algorithm analysis 

    상세보기

22. T. Yoshimura, K. Yano, T. Fukui, S. Yamamoto, S. Nishido, M. Watanabe, Y. Nemoto, Optimum design of die casting plunger tip considering air entrainment, in: Proceedings of 10th Asian Foundry Congress, Nagoya, Japan, 2008.