다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Interaction and multiscale mechanics, v.5 no.4, 2012년, pp.347 - 368
Yang, Y.B. (Department of Civil Engineering, National Taiwan University) , Li, Y.C. (Department of Civil Engineering, National Taiwan University) , Chang, K.C. (Department of Civil Engineering, National Taiwan University)
AI-Helper
Measuring the bridge frequencies indirectly from an instrumented test vehicle is a potentially powerful technique for its mobility and economy, compared with the conventional direct technique that requires vibration sensors to be installed on the bridge. However, road surface roughness may pollute t...
Abdel-Ghaffar, A.M. and Scanlan, R.H. (1985), "Ambient vibration studies of Golden Gate Bridge: I. suspended structure", J. Eng. Mech.-ASCE, 111(4), 462-482.
Biggs, J.M. (1964), Introduction to structural dynamics, McGraw-Hill, New York.
Brownjohn, J.M.W., Magalhaes, F., Caetano, E. and Cunha, A. (2010), "Ambient vibration re-testing and operational modal analysis of the Humber Bridge", Eng. Struct., 32(8), 2003-2018.
Bu, J.Q., Law, S.S. and Zhu, X.Q. (2006), "Innovative bridge condition assessment from dynamic response of a passing vehicle", J. Eng. Mech.-ASCE, 132(12), 1372-1379.
Chang, K.C., Wu, F.B. and Yang, Y.B. (2010), "Effect of road surface roughness on indirect approach for measuring bridge frequencies from a passing vehicle", Interact. Multiscale Mech., 3(4), 299-308.
He, X., Moaveni, B., Conte, J.P., Elgamal, A. and Masri, S.F. (2009), "System identification of Alfred Zampa Memorial Bridge using dynamic field test data", J. Struct. Eng.-ASCE, 135(1), 54-66.
ISO 8608 (1995), Mechanical vibration-road surface profiles-Reporting of measured data, Geneva, Switzerland.
Lin, C.W. and Yang, Y.B. (2005), "Use of a passing vehicle to scan the bridge frequencies-an experimental verification", Eng. Struct., 27(13), 1865-1878.
McGetrick, P.J., Gonzalez, A. and OBrien, E.J. (2009), "Theoretical investigation of the use of a moving vehicle to identify bridge dynamic parameters", Insight, 51(8), 433-438.
Nguyen, K.V. and Tran, H.T. (2010), "Multi-cracks detection of a beam-like structure based on the on-vehicle vibration signal and wavelet analysis", J. Sound Vib., 329(21), 4455-4465.
Ren, W.X., Zhao, T. and Harik, I.E. (2004), "Experimental and analytical modal analysis of steel arch bridge", J. Struct. Eng.-ASCE, 130(7), 1022-1031.
Wilson, J.C. and Liu, T. (1991), "Ambient vibration measurements on a cable-stayed bridge", Earthq. Eng. Struct. D., 20(8), 723-747.
Xiang, Z., Dai, X., Zhang, Y. and Lu, Q. (2010), "The tap-scan method for damage detection of bridge structures", Interact. Multiscale Mech., 3(2), 173-191.
Yang, Y.B. and Chang, K.C. (2009a), "Extracting the bridge frequencies indirectly from a passing vehicle: parametric study", Eng. Struct., 31(10), 2448-2459.
Yang, Y.B. and Chang, K.C. (2009b), "Extraction of bridge frequencies from the dynamic response of a passing vehicle enhanced by the EMD technique", J. Sound Vib., 322(4-5), 718-739.
Yang, Y.B. and Lin, C.W. (2005), "Vehicle-bridge interaction dynamics and potential applications", J. Sound Vib., 284(1-2), 205-226.
Yang, Y.B., Li, Y.C. and Chang, K.C. (2012), "Using two connected vehicles to measure the frequencies of bridges with rough surface: a theoretical study", Acta Mech., 223(8), 1851-1861.
Yang, Y.B., Lin, C.W. and Yau J.D. (2004), "Extracting bridge frequencies from the dynamic response of a passing vehicle", J. Sound Vib., 272(3-5), 471-493.
Yau, J.D., Yang, Y.B. and Kuo, S.R. (1999), "Impact response of high speed rail bridges and riding comfort of rail cars", Eng. Struct., 21(9), 836-844.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.